DJI Osmo Pocket - Set of 4 ND Filters (ND4, ND8, ND16, ND32) for Camera Lens, HD Photos, Light-reducing Materials, Magnetic Design, Easy to Change, Compatible with DJI Osmo Pocket

Being able to get my Pocket and other cameras over head height has often proved useful but the poles I used could be cumbersome with some form of phone clamp fitted plus a mount for the camera. This purpose made pole looked worthwhile but at a high price. Now I have used it I think it is well worth the price and a great addition to my Pocket kit. The whole thing seems well made and the length is enough to reach over heads or use as a selfie stick. The phone holder easily takes my iPhone XS Max and the fitting for the camera was at first sight a little basic but I then found the pole actually locks onto the camera's phone adapter. The next part of the set up was to connect the phone to the camera and here I thought I had a problem. On my DIY rigs I had been using a lightning extension cable with one end plugged into the iPhone connector on the camera and the other to the phone but of course the iPhone connector on the cameras is now used to connect to the extension rod and links to the handle buttons. I did not want to buy the DJI wi-fi adapter as its something else to take battery power and another expense but other reviews said it could be a cabled connection. Eventually discovered that the power connecter also takes data and a half metre lightning to USB C cable is perfect for the job. No playing with wi-fi or adding weight to the camera. Just plug the phone in and it opens the DJI app ready for use. I am guessing that as the camera is not using power to send wi-fi and the phone is not using power to receive it the cable solution should increase battery life on both camera and phone. Not tested this though. In use I am impressed. I have been in the habit of controlling the camera from the phone screen but the buttons on the extension are so much easier. Initially slightly confused as I assumed, wrongly, that the button numbers shown on the description in the tiny user guide would refer to the numbers on the diagram. They actually refer to hard to see printing on the buttons and are different references. Once I sorted that out the only problem I had was one button which cycles through three operation modes but with the camera screen blank the phone screen did not seem to show the mode, which was a real nuisance. Finally found a small icon on the lower right of the phone display which when clicked brings up a box showing the mode. The box stays in place until turned off unless you touch the screen again for another reason and does not get in the way of viewing so solves the problem. My conclusion is that this is a very worthwhile addition to the camera. Not for use all the time as it rather defeats the point off the tiny pocketable camera but its not huge and not heavy so good to have around. My only minor reservation is that its battery can only be charged via the camera charging socket. How hard would it have been to fit a socket so it could be charged while the camera was in use.

Excellent item

Three out of four, parts of this package are great. The controller works as expected, making certain movements and activities easier. The body clamp/clip/mount works as expected, letting you attach it to a tripod and more. The wireless adapter works instantly and easily. However, the memory simply would not be read by the Osmo. I work within IT so know how to check the issues. When inserted into the Osmo, it continually warned "error" and to replace the card. It works fine in a PC and other devices. I formatted it twice, once quickly and once slow. No change. I tested a larger, same brand, memory card in the Osmo and it was read without an issue. It required a format but otherwise works fine. I was fortunate to have bought that not long beforehand, to have it to use. I can only conclude the supplied memory was either faulty, in a way that uniquely impacts the Osmo reading it, or the card itself is not compatible with the Osmo, which would seem daft. Unfortunately, I can't find a way to contact the seller, to only ask the memory card is replaced, instead of sending the entire package back, which I don't want to do.

Really this is a pack of essentials to get the most out of your Osmo Pocket - the wireless adaptor making a good stand for doing motion lapses with and the control wheel for precision pan and tilt of the gimble. I have the new control joystick that got released with the Osmo Pocket 2 as well but have gone back to the wheel as its silent in use where as the joystick is noisy in use and gets picketed up by the internal microphones. The current £69 price tag on Amazon seems to be fair for what you get the £99 full price is just too much.

Great product. Extends the reach of the camera and charges it at same time

A very nice bit of kit, makes the gimble respond much faster than the joy stick real easy to switch between pan and zoom up and down, a little more bulky than the joy stick version but still fits in the sleeve and into your pocket 😀 very user friendly.

Can't pretend I'm not bitter about HAVING to buy this from DJI to add functionality that really aught to have been built into the unit... buuut, you know... it is what it is. It feels nice and solid, actually a lot higher quality than I'd imagined, the jack port has a satisfying click and the plastic doesnt feel like it's going to fall apart on you... but wow, DJI... what a d***k move making us buy this just to get a mic input that means we cant use an external powerpack or your own brand of handle/selfie stick. You really dropped the ball with this on what would otherwise be an AAA product.

Awesome but if kit to store and charge your Osmo Pocket. It gives it extra protection, moreso than the case it comes with out of the box. Keeps charging the camera when inserted and the ease of use when plugging in a USB C lead, only takes an hour or so to fully charge and it's just a great little contingency when travelling. It's only a bit bigger than the camera itself, it's a nice sleek design, it's not without it's minor flaws but when you weigh up the Pro's and Cons of just keeping the camera on it's original out of the box case, it just gives you piece of mind. The camera itself is awesome in many ways and is prefer to keep it safe with this charging case is in added layer of protection.

Prima di descrivere pregi e difetti del prodotto, devo precisare che si tratta di un Amazon Warehouse. Già, la precisazione non è da poco conto, visto che, se non l'avessi saputo, avrei potuto scambiarlo per un kit nuovo di zecca: non presentava alcun segno e/o difetto. Sulla scatola (originale) c'era un bollino (un "bollone") che mi ha fatto subito ricordare che si trattava di un prodotto Warehouse. Per il resto tutto era perfetto, scatola compresa. Ho subito verificato il funzionamento dei singoli pezzi ed ho apprezzato la leggerezza e l'immediata connessione. Modulo Wifi Il modulo wifi fa il suo dovere, la risposta alla digitazione sul cellulare (con l'app originale DJi) è istantanea e non ho notato differenze rispetto alla connessione fisica col cavo. In sostanza, senza il fastidio del cavetto, si può comandare a distanza la Osmo Pocket. Controller Wheel Un po' duro l'inserimento sulla Osmo Pocket, però, a parte questo che può essere considerato anche un pregio (non si staccherà mai da sola), il funzionamento dell'accessorio è perfetto e semplifica decisamente l'uso della camera. Anche in questo caso, risposta immediata della Osmo alle rotazioni della rotellina ed alla pressione dei pulsanti. Ho trovato un po' macchinoso il passaggio dall'asse orizzontale a quello verticale, sarebbe stato meglio inserire una sorta di minijoystick (tipo quello dei comandi della Nintendo Switch che si muovono in ogni direzione). Comunque promossa. Accessory mount Per me l'unico accessorio superfluo, visto che ho altri adattatori che lo sostituiscono. Però devo dire che è ben fatto e il bloccaggio della camera è davvero saldo, benché una volta inserita nell'imbracatura, diventi inaccessibile la slitta dove si inserisce l'adattatore usb. Scheda Microsd Me ne ero dimenticato ma c'era anche un'ottima scheda della Samsung... non bastano mai, quindi mi fa comunque comodo. Istruzioni E qui apriamo un capitolo a parte... o siete alti 15 centimetri e vi chiamate Puffo Brontolone, Grande Puffo, ecc.. o saranno decisamente illeggibili! Ma dico io, come si fa a mettere delle istruzioni scritte con caratteri così... così... microscopici! Va bene che bastano dieci minuti per capire il funzionamento degli accessori, ma due righe (leggibili) le potevano anche mettere. D'altra parte lo stile DJI (per quanto riguarda le istruzioni) lo avevo già "apprezzato" con l'Extension Rod: quel foglietto rigato l'ho dovuto guardare due volte per capire che erano le istruzioni e che le righe erano parole!! Mi è passata per il cervello l'idea di prendere la lente d'ingrandimento (non scherzo), poi ho rinunciato ed ho cercato in internet le istruzioni. Conclusioni Istruzioni a parte, gli accessori originali DJI sono perfetti. Il kit è -secondo me- un ottimo acquisto che aumenta le potenzialità della Osmo Pocket. Amazon Warehouse è stata una scelta azzeccata. Sono soddisfatto.

التصوير جيد بيها وتعطي تصوير أفضل

I got an Osmo Pocket to use as an extra camera for live stage performances, where I will be tracking performers around the stage using the camera's phone app. To trigger this, I bought this bundle for the WiFi adapter to get a direct feed of the camera to my phone and it works seamlessly! Great video quality, very useful for controlling camera settings and adjusting ISO and it connects consistently with no issues. I wish the Wifi module had a 1/4" jack on the bottom for a tripod but no big deal. The module re-locates the USB-C port to the rear of the camera, and I was able to record for 3 hours straight with the camera powered by a USB Battery. Next is the wheel adapter which again, works really nicely for low-controlled pans and tilts. I like how you only control 1 axis at a time - it allows for very smooth up/down/left/right movement with no wobble. Can't re-map the buttons, I wish I could bring up options or something with them. The mount it comes with is a bit useless for me. It's big and bulky with the GoPro-style adapter around the back, and you can't attach it with the controller module also in use. The 32gb Micro SD card is a nice feature but I wish it was a 64gb or even 128gb for shooting 4k24. However 32gb is probably fine for casual use. Good set overall and I'd recommend it!

Very deceiving order name. This is for the original DJI Osmo Pocket - not the Pocket 3. The name was clearly intended to deceive, as they called it the "DJI Osmo Pocket Part 3" Hopefully they respond, as since it is not fulfilled by Amazon, you need to go through hoops to get it returned.

While I feel this is overpriced, it's still an accessory I would not want to do without. First of all, it's a sturdier and more protective carrying case for your camera than the one it comes with. Second, it charges quickly, has a really long battery life, and quickly charges up your Osmo Pocket. We can take this with us on long hikes and know the camera won't get crunched in a backpack, and we won't run out of charge. I've seen some reviewers complaining that it's hard to get the camera out, but I have not had this problem AT ALL. You do need to make sure your fingers are dry and give it a good grip, then just pull straight up. Comes out easily every time for me. Also, some reviewers complained there was no place to put the phone connectors. THIS IS NOT TRUE! There's a slot at the bottom that will hold both the Apple and Android connectors. Which is great - I have both types of phones, so I always have both connectors with me in the case. My only complaint is that it's too much money, but I'm still glad I got it.