🚀 Unlock precision power for your European ride—injector removal made effortless!
The Alltooetools Engine Injector Removal Puller Kit is a robust, steel-constructed toolset designed specifically for FSI injectors in Audi, Volkswagen, Skoda, and Seat vehicles. Featuring multiple adaptors and a blow-moulded case, it supports a wide range of engine sizes from 1.4L to 4.2L V8, ensuring professional-grade injector removal with secure, grease-resistant handling.
| Manufacturer | Alltooetools |
| Part Number | SF0053-1 |
| Item Weight | 4.73 pounds |
| Package Dimensions | 11.69 x 7.52 x 2.32 inches |
| Item model number | B07JNML3NL-18-Piece Set |
| Is Discontinued By Manufacturer | No |
| Item Package Quantity | 1 |
| Included Components | A: Ball type insertion adaptor, B: Injector puller large cup type for FSI type injectors (23mm x 76mm), C: Injector puller small cup type for FSI type injectors (14mm x 40mm), D: Injector puller two leg (thin) for FSI type injectors (19mm x 20mm), E: Two cylindrical adaptors (12mm I.D., 13mm I.D., 40mm long), F: Two tapered cone adaptors (27mm x 4mm taper, 35mm x 7mm taper), G: Three knurled stepped adaptors (24mm), H: One threaded cup type pulling adaptor (15mm x 10mm), I: One threaded cup type pulling adaptor (10mm x 8mm), J: One spacer bush (19mm O.D x 12mm I.D. x 12mm long), K: Slide hammer puller, L: Disconnect key (9.5mm) |
| Batteries Included? | No |
| Batteries Required? | No |
| Warranty Description | 30 days |
J**T
Works well.
I was doing a valve carbon cleaning on a 2015 vw tiguan 2.0 tsi. Had to get new seals for the injectors so I purchased this tool kit. Did a good job of getting the seals seated on the injectors.
D**N
Worked on a 2008 Audi A6
I needed to remove and clean the fuel injectors on my 2008 Audi A6. I gave this tool a try and it worked great. The slide hammer remover is a little fiddly since you can't screw in the handle all the way or there won't be enough room to get it onto the injector. The remover worked and the seal installer worked. Worth it to save hassle trying to get direct injectors out with generic tools.
C**R
Good product
Use as intended by description
J**.
Worked for FA20D "GT86" direct injectors.
The Subaru dealership quoted me $153 in labor to put the seals on. Never done this before. There is a video by the youtube channel "Humble Mechanic" that uses this exact kit.The video is titled "Replace injector seals on direct injection engines"Everything else in the kit is super extra and you just need the little cone. It is the exact diameter as the BRZ direct injectors. The smallest donut doesn't fit over the cone. So get it started with the knurled ends towards injector, move on to the medium one and slip it on. Flip the donut around and gently twist it in place to shrink the seal. Let it sit for a couple seconds.Saved myself over a $100 and definitely recommend it.I do recommend getting calipers and measuring the diameter of your injector tips if you get this for another motor. Can confirm it works for the GT86/FRS/BRZ though
D**S
Worked fine
2.0 2011 TiguanWhen doing the carbon valve cleaning more than likely some injectors will pull out of the head when pulling the intake.This tool made it very easy to change the seals on the injectors.No instructions, search for videos on how to use it.
D**L
Worked in removing Direct injectors
I had to remove all direct injectors on a VW Touareg and the kit worked perfect. Only wish it had instructions because there’s pieces I don’t know what to do with. But it worked for what I needed to do.
R**E
It’s okay. Buy a name brand instead
I damaged the teflon seal the first time I tried to put it on because the tool is too small for Audi/vw injectors. I ordered more seals and was able to get them on good enough
A**N
na
NA
Trustpilot
5 days ago
1 month ago
