Upgrade Kobra S1 Ceramic Hotend,0.4mm Hardened Steel Nozzle+Heating Block Integrated Structure Hot End Replacement with Silicone Sock Compatible with Anycubic Kobra S1/S1 Combo 3D Printers

This hotend fit my Kobra 3 perfectly and brought my printer back to life. Installation was straightforward, and it heated up quickly with accurate temperature control. Print quality is excellent again — smooth extrusion, no clogs, and consistent results. Highly recommend for anyone needing a reliable OEM replacement part. Great value and performance!

Worked great!! Fit perfect Solved my clogging issue instantly. I wasn’t able to print ANYTHING before this product. Heats up super fast and cut my prep time down by more than half. fast overnight delivery at a amazing price! So happy i can finally print

I removed the old hotend per the instructions on Anycubic's website. The install for this was easy and it seemed to match the dimensions and look of the original with no visible differences, at first. Once I installed it, I did a PID calibration on the printer as recommended by the manufacturer and fired up my first test print of a temp tower. After the first initial layer, the nozzle immediately began to glob out filament and make a huge mess of the next couple of layers until I manually stopped the print. I took it apart and removed the hotend and cleaned a ton of filament that was jammed in the nozzle. I reinstalled the hotend but what I didn't notice at the time is that the PTFE guide tube that had pushed itself out of the neck about 2mm. When I went to reinstall it, I did just as the first time and pushed up until it was flush and locked the lever back in position. It seemed to have tension when pulling down so I put things back together and fired up a second print. Same thing, temp tower. This time, it laid down the first layer nearly perfectly so I walked out the room. As I was walking away, I heard a loud grinding noise so I ran back in to see what was going on. The gap in the PTFE tube caused the neck to not sit flush and it was not fully locked in position so it had dropped down after the first layer and been dragged along my $35 build plate and dug huge holes and trails in it. I stopped the print, heated up the print head and removed it again and as I pulled it out of the print head, this time the PTFE guide tube fell completely out of the hotend and onto the floor along with a small piece of filament that was left inside. Now not only am I out a functional hotend but I lost a $35 build plate. I try not to leave bad reviews unless I have to and the second install was a bit of user error as I should have noticed, at the point, that the PTFE guide tube was not properly glued into the unit like the factory ones are but it certainly shouldn't fall out.

The ANYCUBIC Kobra 2 Hotend V5 J‑Head Print Head is an excellent upgrade for my Kobra 2 printer! Right out of the box, installation was straightforward and the adapter fit perfectly with the existing mount. The included 0.4 mm nozzle and ceramic heating cartridge heat up quickly and provide consistent, reliable extrusion with very few issues—even on long prints. I also appreciate the high‑quality silicone sock that helps maintain stable temperatures and keeps the heater block cleaner by preventing filament burns and drips. Since installing this hotend, I’ve noticed smoother layers, better filament flow, and reduced stringing on detailed prints. Whether printing PLA, PETG, or TPU, the performance has been excellent and very reliable. Overall, this hotend delivers great value, improved print quality, and dependable performance with my Kobra 2. Highly recommended for anyone looking to upgrade or replace their stock hotend!

Fantastic. Our prints have never been better and we’ve had the printer nearly a year. I can’t believe how much of a difference changing this piece has made. Will continue to use this. Not sure on durability just yet but hoping for hours of printing.

I say probably because I purchased because I got an error message " check hot end and wiring ". Replaced the hot end with this item and I still get the error. Most likely not the hot end but something else so I can't give the fault to this. It's " probably a good item "

I have about 300 hours on thus hotend and have had no issues. It has printed perfect with no leakage or clogging.

Direct fit, works well

Was getting a print head error every time I tried printing. Installed this replacement and it now works perfectly. Perfect print quality and an easy fix.

★★★★★ Hervorragende Qualität und zuverlässige Leistung Das Cobra S1 3D Drucker Hotend mit 0,4-mm-Düse überzeugt auf ganzer Linie. Die Verarbeitung ist hochwertig, die Materialien wirken langlebig und präzise gefertigt. Der Einbau gestaltet sich unkompliziert und passgenau, was sowohl für Einsteiger als auch für erfahrene Anwender ein großer Vorteil ist. Im Betrieb liefert das Hotend eine sehr gleichmäßige Extrusion, was sich deutlich in sauberen Schichten, scharfen Konturen und insgesamt hochwertigen Druckergebnissen widerspiegelt. Die Temperaturstabilität ist ausgezeichnet, selbst bei längeren Druckaufträgen, und Verstopfungen treten praktisch nicht auf. Besonders positiv hervorzuheben ist die hohe Druckqualität bei Standard- und Detaildrucken, die mit der 0,4-mm-Düse zuverlässig erreicht wird. Das Hotend arbeitet leise, konstant und ohne Ausfälle. Insgesamt ein sehr empfehlenswertes Produkt für alle, die Wert auf präzise Druckergebnisse, Zuverlässigkeit und ein gutes Preis-Leistungs-Verhältnis legen. Klare fünf Sterne.

Ottimo acquisto. Il prodotto ha soddisfatto le aspettative

COBRA2Neoのヒーター故障？で動かなくなったので修理用に購入。 フィラメントの導入パイプ（青いパイプ）は取り外した純正の長さに合わせてハサミでカットするだけ。 その他コネクタ・ケーブル類は全く問題なくポン付けで交換完了。5分あればできます。 交換直後のため耐久性については未検証ですが、現状はとりあえず元気に動いています。 …純正でも1年足らずで故障したので、今後も「故障するもの」という前提で２～３個買っておくのもアリか？

Works great, just make sure you recalibrate after installation