WINB Leather Hole Punch, Leather Punch 6-pcs Round Steel Leather Craft Hollow Hole Punch 1/8“-5/16” for Leather Belt Watch Band Gasket

Thank you

For leatherwork, I usually use Tandy tools. These are significantly cheaper but seem to accomplish the same thing at the lower volumes I use these for. I do leather work as a hobby and not for production, so the slight difference in quality between these and Tandy punches will not make much difference. These solid punches are far better than changeable tip punches, regardless of whom they are made by. If I had to choose between these and replaceable tip punches, I would choose these every time.The holes punched are clean with good straight edges. I tested these on leather up to 3/8 inch thick. They worked well regardless of the thickness of the leather I tried them on. The cutout circles of leather move readily up the hollow channel and exit out the side port with no blockages or problems. If you are bothered by the few circles of leather that inevitably remain in the channel when finishing a project, these are readily pushed out with a small wire or probe.I have not needed to sharpen mine yet, but I sharpened one anyway to see how hard it would be. These are easy to sharpen with any standard knife sharpening stone or motorized grinders, including a Dremel. These stay sharp better and cut cleaner with less hassle than the interchangeable tipped ones. I have not used these on any material besides leather, so I cannot comment on their suitableness for other materials. If I wanted to test a set on different materials, I would buy a second set for this purpose and leave one set for leather use only.Overall a good set of leather hole punches at a reasonable price in a useful range of sizes. The product description is accurate, and I would definitely get these again.

The 3 on the left are ok and the 3 on the right are dull. All 6 was hammered with the same amount of pressure 3 times. One of the punches had a chip in it. These can be easily sand to sharpened.

I have never used leather hole punch tools so I wanted something simple to use. This product fit that requirement. Initially, I got it to re-use some leather belts so they could secure S-hooks to a rail rather than fly off every time I tried to pull something off the hook. I saw this trick on a video and it works great. This tool made it easy to put holes into the leather and then wrap onto the rail and secure the hook. I've used for other projects re-using leather belts like drawer knobs. With the reasonable price point, this product has been very useful.

I ordered this set because my partner needs a new notch in his belt due to changing weight, but these punches have found additional uses in creating some replacement leather drawer pulls and adding a hole to shorten a purse strap to my preferred length. I find them far easier to use than one of the pliers-type hole punches, and love that these can be sharpened more easily as well. The metal seems to hold a pretty sharp edge, so they should last a few years if we're doing more leathercrafting, and probably a decade or so if they only get used for occasional projects.

This set of leather punches is a great value. Made of heavy gage steel and you can see the heat treat coloration on the cutting edges. Work great for a variety of lighter gage leather. The two largest punches need extra pressure to cut through thick leather, but all the punches cut cleanly.

I needed to replace an old set of punches. These seem sturdy and punch through nice and clean. I have used them on a 6mm leather so far but i feel confident they will work on thicker. Nice set.

I love the different sizes and shaped provided. The length is good but the only thing was the width of the punchers. I feel like I missed or didn't hit it right, might knick your hands accidently.