LICHIFIT 1pair TV Speaker Bar BN96-16796/16798/18089/18088/18070 A/B/F/H/G Replacement Part for Samsung TV Television

These speakers were perfect replacements for the old, non-working speakers in our old Samsung UN55H7150 TV (the Costco version of the 7100). After placing the tv on its front (hint: be careful not to grip the screen too hard and use a soft towel as a cushion) on a table, it only took about 5 minutes to remove the screws from the back of the TV. Then carefully remove the back TV covers (outer "bezel" first then the large flat metal "cover" to expose the speakers. Note: use a small head phillips screwdriver and keep track of the screw sizes - there are about a half-dozen slightly longer screws on the outside, the rest are a bit smaller in length. There is also a screw around the power cord area that needs to be removed too. If the cover doesn't come off easily, look for screws that might have been missed. The two speakers are at the bottom of each side, black plastic (approx. 3" x 6") with a metal cover. Carefully remove the back (metal) cover from each speaker enclosure. Be gentle with any wiring connections. I used a thin screwdriver to pry the covers off. There was a slight bit of gooey adhesive used to stick the covers on. With the covers removed I could see the speakers themselves, with lots of foam surround falling apart. My speakers had two small phillips head screws attaching them to the enclosure. Note the position of any markings (red ink) for reference so you can replace with the new ones to maintain polarity. After removing the screws, I slowly pried the speakers (oval) from the case. Note: on one side of the speakers there were two small (1/2") adhesive dots on the "back" side of the back plastic covers that helped stick the speakers to the black plastic case. Peeling these off allowed the old speakers to be easily removed without much effort. Replacement was just the reverse. The (included) rubber standoffs go into the "holes" on the sides of the black plastic enclosures - replace the old ones if/as needed. Total time - start to finish was about 30min. Results were great - back to the original TV sound again just like new!

Read review with install instructions from Vincent P. This new unit is slighly thicker than old one but fits fine since screws are long enough. Before removing old speakers, note location of red stripe at screws becasue you must follow orientation or speaker wont get signal from copper tabs. I put a dab of glue on metal plates and round silver speaker coils.

Restored the sound quality on our Samsung Smart TV. Just be mindful that the plastic is thicker than the original, making the fit of the clips that must be transferred from the original speakers to the new ones difficult. I had to stretch the clips to get them to fit. Otherwise, a quality product at a reasonable price

They fit and performed as good as the original speakers. I am happy with them.

Excellent. Exact. Easy.

I bought my Samsung 46 inch TV in Nov 2011. While these speakers are advertised as replacements for my model, they do not work. These speakers have the same footprint, but are thicker than the originals by about 1/16 inch. The original speakers have a small metal sleave that must cover the tip of the speaker at the screw slot. Since these speakers are thicker, the metal sleeve will not fit. This sleeve connects the power from the screw slot contact to the contact on top of the speaker, so the end result is that I can not get power to the new speakers.

Bought a pair to replace broken original speakers for a Samsung tv. But the received speakers are 1 mm thicker, a big issue when installing as thickness prevent a proper electric connection. Nothing that a careful file and rotary tool can not fix, but the definitely not plug & play. Sound seems fine.

These were a perfect fit for older Samsung tv that speakers had given out.