I keep getting "Low Voltage Warning" on raspberry pi 4, why?

Dear customer, Thank you for choosing Freenove. We are fully responsible for any concerns. The main reason of this warning is the use of incompatible power supply, or an issue in the power cable If you have any concerns, please feel free to contact us. Best regards, Shaynee Freenove Support Team

Is the power derived from the flat flex cable? it doesn't look like there is any usb or barrel jacks on the monitor.

On the one I bought, a 7-inch IPS display, there are two (1 positive and 1 negative) spring loaded (pogo pins) contacts on the LCD that make contact with the +5V and Ground pins on the bottom of the GPIO header when you mount the RPi onto the provided standoffs. GPIO pins 4 and 6. Those pins are still available to use on the top of the GPIO header too. Alternatively, there was a 2-pin power cable and longer ribbon cables included with the one I bought, for remote mounting the Raspberry Pi some small distance (3-4 inches) away from the LCD display.

How do I rotate the touchscreen matrix of this display for portrait mode? I have tried edev and /boot/config.txt nothing works

Dear customer, Thank you for choosing Freenove. We are fully responsible for any concerns. There are two kinds of display direction rotation: FKMS mode direction rotation and traditional graphics mode direction rotation. Because there are many steps, only the second method is sent. If you have any more questions, please contact us by email and we will send you a PDF file. Method 2: Traditional graphics mode By default, the Raspberry Pi 3, 2, and 1 series use traditional graphics mode. Raspberry Pi 4B can also use traditional graphics mode, just in /boot/config.txt file under the Pi 4: dtoverlay=vc4-fkms-v3d Comment out, as shown (Traditional graphics mode is generally not recommended on Raspberry Pi 4B). In traditional graphics mode, this can be done by adding it at the end of the /boot/config.txt file: display_lcd_rotate=x（x=0,1,2,3,0x10000,0x20000） To set the display orientation, reboot is required to take effect . If you have any concerns, please feel free to contact us. Best regards, Shaynee Freenove Support Team

Can I plus this into the DSI slot on an Orange Pi 5 Plus?

Dear customer, Thank you for choosing Freenove. We are fully responsible for any concerns. No, it only works with Raspberry Pi. • Compatible models -> Raspberry Pi 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+. (No HDMI. Not compatible with any other device.) If you have any concerns, please feel free to contact us. Best regards, Shaynee Freenove Support Team

Brand	FREENOVE
Product Dimensions	21.2 x 14 x 3.8 cm; 340 g
Item model number	FNK0078B
Manufacturer	Freenove
Series	FNK0078B
Colour	7 inch IPS touchscreen
Standing screen display size	7 Inches
Screen Resolution	800 x 480
Resolution	800 x 480
Processor Brand	Freenove
Processor Type	None
Computer Memory Type	SRAM
Hard Disk Description	HDD
Hard Drive Interface	Unknown
Graphics RAM Type	DRAM
Graphics Card Interface	Integrated
Voltage	5 Volts (DC)
Are Batteries Included	No
Item Weight	340 g
Guaranteed software updates until	unknown

Sponsored Ad – 7 Inch Touchscreen Monitor for Raspberry Pi 5 4 B 3 B+ A+, 800x480 Pixel IPS Display, 5-Point Touch Capacitive Screen, Driver-Free MIPI DSI Port

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions