EZARC Carbide Oscillating Tool Blades, Multitool Blades Heary Duty for Hard Material, Metal, Nails. Bolts. Screws, 3-Pack

These oscillating blades work better than most will cut nails without tearing up the teeth.

I wanted blades for projects that I knew would destroy them. These were better than expected! Lasted longer than I anticipated. I used one for prepping cracks in stucco. Held up better than a name brand blade. Why pay a high price for a name brand blade at a big box store?

Not the best blades but pretty good quality for the price. Not super sharp and probably won't last long but great throw away blades at a good price.

Have used many "so-called" oscillating blades for cutting nails/screws. Nails are not so bad but screws are different story my experiences been the so-called metal cutting blades last no more than 3 or 4 screw cuts. Renovating thirty-year-old deck which means having to deal with rusted deck screws. Almost all are #8 with a good coating of rust. And rust is much harder on blades than the metal itself. Did a lot of searching before purchased these blades. Because the screws have deteriorated at least 1/3 of the screws cannot be removed with a driver (heads break off) which then requires the oscillating tool. Thus far I've got at least 50 screws on same blade. What is help greatly is having an oscillating tool that has 5° capability with good power. I'm using an old Rockwell F50. Please note these blades have virtually no woodcutting capability.

I purchased these for cutting metal and wood that may have nails or screws embedded. I tried a blade on several nails from 6d t0 16d and it cuts right through them without noticeable wear. I also had a sink drain stopper lever that needed to be shortened. It was considerably harder than the nails and this blade cut through it with no problem. Cutting wood is another matter. If you have wood with nails in it, or you want to reach behind or between boards to cut nails off this will work pretty well, but when you try to cut through wood directly it will heat up and burn quickly. These small teeth are primarily made for metal and some plastics. They just won't clear sawdust efficiently enough to make this a good wood cutting blade. For cutting wood, try the EZArc Japanese Tooth blades. They're awesome! Just don't hit a nail with one. I have purchased several different types of EZArc oscillating saw blades recently and they work very well in the applications they are made for. Far better than some of the other brands I've tried.

My expectations were very low, I didn't believe that these were really carbide but I was pleasantly surprised. I was working on a project where I had to plunge cut into boards and cut nails and I was ruining blades left and right so I bought these as a long shot. I was able to finish up my project with a single blade and it still has life left in it. I highly recommend these for the price.

Works but doesn't last long. Bought brand name in Home Depot and has way outlasted the EZARC

These cut as well and last as long as name brands at over twice the price.

Jag förväntade mig att de skulle vara lite vassare. Bladen verkar hålla länge men det är tydlig skillnad på hur snabbt man kan kapa/skära.

Coupes de multiples pointes de vis tôles qui dépassaient à l'intérieur d un abri. Produit malgré tout de bonne qualité Cdt

Fantastic product at a reasonable price.

３ミリ厚ほどのFRPカットに使用。ゲル割れも少なく良く切れます。買って良かったです。

Really sharp cut through bolts needed to get rid of. Only used one blade and it’s still got lots left on it.