OVERTURE Matte PLA Filament 1.75mm, Easy to Print, PLA Matte 3D Printer Filament 1kg (2.2lbs), Cardboard Spool, Accuracy ± 0.02mm (Matte Pink)

The media could not be loaded.  To the person that gave a one star review on the stone white pla… your settings can’t have been correct. The stone is as easy to print as all their colours.. stock Ender 3 S1 pro, 200/60° and the Groot print speaks for itself

I couldn’t find a comparison of this so for anyone trying to match the Ryobi green, go for Grass Green. The filament is ever so slightly brighter but you won’t notice unless it’s right next to a tool.The other Overture green colour (Matte Olive Green) is the wrong hue.Hope this helps!

Bought this as an inexpensive filament to print out some bases which I will be painting and sticking yarn on top of so the finish doesn't really matter to me.So far I really like this shade of grey and matte texture compared to one's I got in the past. I also really appreciate when filament comes on cardboard rolls so they're easier to recycle afterwards, and I love the little measurements on the side to show how much filament you approximately have left. I'm terrible at keeping track of how much filament I have used and usually guess wrong near the end of the roll so hoping this helps me plan out what I have enough for by the end.Adhesion to the is perfect, as new rolls usually are for me. Though I can hear pops coming out of the hot end while it prints, and can see little holes on the print surface semi frequently. For some reason it seems my usual retraction settings that work on my other filaments are too high for this filament. That or this filament is weaker then other filaments and leaving dents from the extension feeding gear/wheel thing. I'm not too sure yet but I advise doing some test prints with this PLA before going straight for any long over night prints.

Absolutely loved the colour and the Matt feel to it.

I always go for overture filament, and it never disappoints, it always melts well and sticks to the plate well, will definitely be buying again.

brilliant works flawlessly and tangle free!

The 'Light Blue' filament sticks really badly to the point that it damaged my Ender 3 magnetic bed. I got awful results printing at 210 degrees 50 bed temp and had to up both to 220/60 for a just about manageable print quality, still had some layer delamination even then. It has a very gummy feeling to it that I think is causing clogging issues on my standard brass hot end, this might require something a bit better to aid printing. This was on an original Creality Ender 3 printer.

I wanted to print some storage for my Ryobi tools in a similar colour, this was a really close match. It printed well on my Neptune 3 Pro and lives up to being called a matte filament in both feel and reflective properties.

As someone who 3D prints A LOT... this filament has become my go to for several reasons. First, it looks really nice. The matte finish makes prints appear post processed before they are sanded. Second, the quality control is excellent, I have never received a bad filament after ordering hundreds of rolls. Third, it prints perfectly. One random thought is that I love the cardboard spools. The only negative I would say, and this is similar with all PLA filament, is that it readily absorbs moisture from the air and this will ruin print quality. Be sure to dry this filament before use if it sits out a long time in a humid climate.Overall, HIGHLY recommend this filament.

J’ai acheté deux bobines de cette marque.L’une s’imprime super bien, mais celle ci (le orange mat) laisse pleins de trous dans les paroie de l’impression.On entend le filament buller dans la buse.Je pense qu’il est humide.Dommage pour le prix.

I've probably purchased 30 spools of Overture filament. The orange PLA filament from them is another excellent TPU 95a. The print is very soft and squishy, but doesn't separate at the layers. It has a very nice "rubber-like" behavior.I continue to keep buying Overture, especially for projects where I need to trust the consistency of the results.I recommend Overture to my friends and for other people's projects, and I recommend it to you too!

easy to print

I'm not a 3d printer expert but I can say this matte white filament has been significantly better than the other PLA I was using. The bed adhesion is extremely high (at 70C bed temp).Sidewall quality is excellent as well. Top-surface quality is not amazing but I am going to tweak my printer settings to try to improve it, however it is at least as good as other PLA.