





⚡️ Charge smarter, work sharper—your desk’s new power move.
The mophie Charge Force Desk Mount is a magnetic wireless charging dock designed exclusively for mophie wireless cases. It securely holds smartphones up to 5.5 inches with embedded magnets, offers fully adjustable viewing angles including 360° rotation, and initiates wireless charging instantly upon contact—eliminating cable clutter and enhancing your workspace efficiency.
M**S
Great Charging Stand! Highly Recommend!
This is a great product. I have all of the charge force accessories for my iPhone 7 Plus and my husband has the iPhone 7. We just recently got my family hooked on this as well. The charge station is very convenient. It says in place very well and is very convenient- the magnet is very strong and will stick to your mophie charge case immediately. Even if you don't want to use it as a charger, you can just use it as a stand by simply unplugging the micro-usb to the stand. This will keep your phone upright and visible on your desk while you work or on your night stand. They did a great job designing this stand, the weight is evenly distributed. I thought with the extra weight of the iPhone 7 Plus it might tip over but i've been using this for over a month and no signs of any issues. It also works great for my husbands iPhone 7. I would highly recommend it to anyone that has a charge force case and wants the stand that is upright.
C**S
Buy the wall adapter if charging.
You might want to buy the charging wall adapter too. Theis dock works ok as a dock, but if you want to charge your phone without it going off like crazy, then you need a higher than 2 amp charging block, which is hard to find. Otherwise, it slow charges (but still only a few hours for full charge) and the light on the back always flashes indicating low amperage or slow charge OR that there's metal between the case and charger.
M**G
Terrible design!
One of the most poorly designed products that I have purchased. Technologically it's great, sits on my desk and charges my iPhone 7S just by attaching the magnetic case to the mount. However, the neck that holds up the mount is way too fragile! I've broken two of these within just a few months of purchasing each. I won't be buying another, and I'm now looking for a competitor for wirelessly charging iPhones.
F**N
but it would've been nice to have the option not to
Seems to work very well for the Juice Pack Air case on the iPhone 7 Plus. I'm not crazy about the base or how wobbly the arm is, but if you have the right surface to put it onto (which you MUST CLEAN first to remove dust, dirt, etc.) then it sticks itself down very well and won't budge an inch.I do wish they had a non-sticky, weighted option though. I use a fabric desk mat and the base won't really stick well to it, for obvious reasons. I'm working around it by switching to a fitted mousepad, but it would've been nice to have the option not to.I bought a few of these, one for home, one for work, one for my nightstand, and I also put one in my car! It's the same base as the vent mount, just, well, using a ball mount instead. I'm using a RAM Mount rear view mirror base, standard extension arm, and an ARKON Ram to Garmin adapter. You can affix it to any car mount that uses a Garmin-style 17mm ball, but I'm partial to RAM style mounts and adapters because they're sturdy and use springs and rubber pieces that significantly dampen vibrations. The rear view is one of the shakier bases you can use, but it still holds pretty steady. I mounted the base itself upside-down, but ran a 15 foot MicroUSB cable (rated for 2.4 amp charging) above the mirror, around the windshield, down the door column and below the seat - so even though it holds my phone up high, there are no cables in my way. Take care to avoid running it along any side airbags if you do this yourself (do what I did and ask a mechanic familiar with your car to check it first if you're not sure.)With a matching Mophie case like mine, the magnets hold VERY well. It's almost difficult to remove. I've hit big bumps in my car and the phone doesn't budge from the mount. On the desk, I can reposition it by grabbing the base behind the phone and tilting or turning and the phone stays firmly attached.My one issue is that sometimes the phone disconnects and then reconnects while connected. It was worse when I had grip tape on the back of the phone case; once I removed it in favor of honeycomb grips on the edges, it improved significantly, but it still occasionally acts up.I did notice that if you've got both a drained phone and case, and you're using something very power-intensive like a GPS app combined with a music streaming service, it will charge but only at a slow pace. It's also going to generate a bit of heat in general, which isn't a problem for me or most people, but might be if you use it in an already hot environment. It's probably a good idea to keep enough slack in your cable that you can switch it to the phone instead, or have a second cable handy, just in case you find yourself in a situation where the power demands are very high or heat becomes an issue.
M**N
Pricey but worth it if you have a charge force mophie.
Love it so much I bought a second one! Bought the first one on prime day 2017 (was on sale) and was in love. The magnet is so strong that it takes your phone out of your hands once it's about 1/2 inch from it. The magnetic part rotates a full 360 degrees and you have a tilt factor (maybe 20 degrees in any direction). The first one is at my desk at work and does tilt enough that when I use my freestanding desk (monitor, keyboard, mouse go up not whole desk) I can still clearly see it.The second one I bought "like new" and same exact product and packaging etc is on my nightstand, has more or less replaced my iHome as I don't charge with it anymore.There is a sticky surface on the bottom to make the mount STAY put but I don't use it on either one of mine and they still stay where they are.Be sure to buy a USB wall brick if you don't have extras hanging around (like the white cube that attaches to your iPhone cord to charge at the wall) as it doesn't come with one.Do be warned NOT all mophie cases are charge force compatible!!! Not sure and already own a case? Make sure that the inside of the case has a radiating lightning bolt (see picture). My mom has a fairly new iPhone 6+ mophie and it is NOT charge force compatible.
K**O
JUST LET ME SLEEP
Great product idea, wish the technology worked. It charges the phone and the juice pack perfectly, and as advertised. Unfortunately, once it's done doing that, it has connectivity issues with the charging base and the phone alerts you every two minutes when the phone charger disconnects and then reconnects. Especially annoying when it's at 2am and you're sleeping within earshot. Wakes me and the wife up all night long. Unhappy wife retaliates during the day with snide 'flawed technology" remarks and suggestions of sleeping on the couch. Now I just use it as a stand, and leave the cord plugged directly into the phone. Kind of an expensive magnetic phone stand. Sad face. So hey, Mophie - if you can fix the connectivity issue here, you'd really have a great product. Juice pack itself is amazing. This charger stand is a homewrecker.
Trustpilot
2 months ago
1 month ago