I want to run the led around the whole room, so i need about 65ft, i want it to have a chasing pattern, what do i do, what parts do i need to buy?

First thing I would do is calculate how many LEDs are in your 65 feet length and multiple that number by .06 to establish the maximum current required for your power source. Next do you want to program the lights yourself or do you want pre written selectable patterns? Programmable is hardest method and I have no experience with any of them. Selectable patterns are usually written with a couple of hundred patterns to choose from. I've had great success withhttps://smile.amazon.com/dp/B07FDW1VZB/ref=cm_sw_r_cp_apa_glt_fabc_WJZCRHYWHS60F9Q7377T Your power supply can be from five (5) volts to twenty four (24) volts and there will not be a need to buy a separate power supply for your lights and controller. Best of luck on your project.

What are the 2 loose wires for? Are they just a secondary conection for power?

From a google search I found this image( https://a.pololu-files.com/picture/0J4995.1200.jpg ) which shows the Arduino using signal and ground on the 3-wire connector and external power supply connected to the two "loose wires". So I would think that for a short section/small number of LEDs it could be powered directly from the 3-wire connections. But if a long string of LEDs is going to be used, lots of current/power is needed and connecting to a beefy power supply would be requires so the loose wires can be used for that.

I want to run 4 -16.4 feet strips together , can i use the bluetooth sp611e sync music controller instead of the sp601e controller ????

there are two output , each output port can control max 600LED

I bought a ws2812 led strip but what else do i need to use it?

At the very least you need a +5V DC power supply and a data signal. That could be from a Raspberry Pi or an Arduino. There are tons of tutorials on the web on how to drive a WS2812.

Color	Black Pcb Ip30
Brand	BTF-LIGHTING
Indoor/Outdoor Usage	Outdoor, Indoor
Special Feature	Individually Addressable, DIY Project, Cuttable, Support Lots of Controllers, DC5V
Light Source Type	LED
Power Source	DC5V Power supply
Light Color	White
Theme	Music
Occasion	Wedding, Christmas
Style	Modern
Material	FPCB
Controller Type	app
Connectivity Protocol	Wi-Fi
Number of Light Sources	144
Voltage	5 Volts
Wattage	45 watts
Included Components	3 PIN male connector
Item Weight	0.05 Kilograms
Item dimensions L x W x H	5.91 x 3.94 x 0.59 inches
Control Method	App
Water Resistance Level	Not Water Resistant
Number of Batteries	10 A batteries required.
UPC	602938067683
Manufacturer	BTF-LIGHTING Technology Co., Limited
Part Number	WS2812B1M144LB30
Item Weight	1.76 ounces
Product Dimensions	5.91 x 3.94 x 0.59 inches
Item model number	WS2812B1M144LB30
Batteries	10 A batteries required.
Is Discontinued By Manufacturer	No
Area Lighting Classification	IP30
Assembled Height	1.5 centimeters
Assembled Length	15 centimeters
Assembled Width	10 centimeters
Shape	LED Strip
Specific Uses	Indoor use only
Special Features	Individually Addressable, DIY Project, Cuttable, Support Lots of Controllers, DC5V
Shade Material	Metal+PCB+Plastic
Light Direction	DC5V Power Supply+Controller
Switch Style	Controller
Batteries Included?	No
Batteries Required?	No
Wattage	45 Watts
Average Life	50000 Hours

BTF-LIGHTING WS2812B IC RGB 5050SMD Pure Gold Individual Addressable LED Strip 3.28FT 144LED 144Pixel/m Flexible Full Color IP30 DC5V for DIY Chasing Color Project(No Adapter or Controller)

Details

Description

Specifications

Common Questions