🚛 Light up your drive with confidence and style!
AmeriLite’s black LED bar square projector headlights are a direct OEM replacement for 2009-2014 Ford F-150 halogen models, featuring waterproof polycarbonate lenses, included high/low beam bulbs, and full DOT & SAE compliance for reliable, all-weather performance.
Brand | AmeriLite |
Color | Black |
Specific Uses For Product | Head Lights |
Vehicle Service Type | Truck |
Special Feature | Waterproof |
Auto Part Position | Right |
Lens Color | Clear |
Lens Material | Polycarbonate |
Manufacturer | AmeriLite |
OEM Part Number | DL3Z13008A, DL3Z13008A, DL3Z13008B, DL3Z13008B, FO2502287 |
Item Weight | 24.2 pounds |
Package Dimensions | 22 x 22 x 18 inches |
Country of Origin | Taiwan |
Manufacturer Part Number | 02-AZ-FF09-PBC-QP-G5-A |
ABPA Partslink Number | FO2502258, FO2503258 |
Special Features | Waterproof |
Safety Rating | DOT Compliant |
J**N
great lights
2013 f150 XLT lights look great and where easy to install just plug and play with new grommets for the lights (well done Ameerlite !!!) the only thing i would of like to have is some install instruction or adjustment instruction. the light where a little to hight and I need to adjust them down some. I don't think it was the light my truck has a 4 inch lift, they would problem be fine on a non lifted truck. But instruction would of been nice to have ( thank goodness for youtube)love and look great
T**A
Good product!
Easy to install & looks great & works great!
F**T
Sharp looking lights
Edit: I purchased the headlights and tail lights to match. Installed last month. All 4 lenses had condensation within the first few days. I'll reach out to the manufacturer for guidance.Original: These lights look great on my truck. Easy to install. I do recommend watching a YouTube video. You do have to cannibalize parts from your old headlight and pay attention to the order of the wires for the halo to work properly. It'll work if you wire it backwards, but the installation video warns this could be problematic.I have automatic light sensors on my truck. The halo doesn't work during the day as a "running light". I'm okay with that, but I've seen others complain about that. Lights still look sharp and are a huge upgrade to the factory look.The projector lights are plenty bright, however the left side sits lower than the right side. I'm sure there is an adjustment for this. I will contact the manufacturer for their recommendation on the uneven light. Although it is uneven, it's only by a few inches. I notice it in my garage but cannot tell the difference when I'm driving.
C**S
Water seeps through the plastic
Wanted these to be good so bad but unfortunately, they’re not made properly. Water seeps through the plastic into the actual interior of the lights. The design is spot on, they look great on my truck but I immediately noticed the water inside. I took some pictures that you may have to zoom in so you can see the water. I even took a video with me wiping the outer part so that there wasn’t any discrepancy as to where the water was. They’re nice but I will be returning, sadly.
J**
They look great!
First off the packaging was great. Install was very easy. The lights look awesome on my 2014 Raptor. The only issue is the gap on the driver side is a little bigger than the passenger side but it’s really not that noticeable.
D**E
Great improvement over stock lights
I replaced the original light units on my F150. What a great difference and vast improvement over the original units. Easy to install simply remove 3 10mm bolts and easy the old lights out. Unpleasant the quick disconnects. Reconnect the fittings, easy the new units into the side catches and reinstall the 3 10mm bolts. You’re done. Wish I had done this a couple of years ago.
B**M
Good product
Got these in August for my ranch truck to give it a modern look and prevent me from buying a new truck when this one gets the job done. from 8/22-4/24 still going strong. Easy to install, just get your beam positioning where you need it and your good. The DRL gives it a modern look. I switch out my bulbs as well and I’ll update with a video and bulbs i used in 2 weeks.
C**.
EASY PLUG N’ PLAY
The media could not be loaded. Super easy install.1) Open you hood2) Remove the top 2 10mm bolts on the headlight housing3) Pull back the black liner (easier if you remove the mounting screw) to see the lower 10mm bolt4) Now give a firm tug straight back - be careful as your lights are connected and you only have so much wire5) You’ll see 3 light plugs, twist to remove all 36) Remove the bulb from the blinker ONLY as this connector mates with light housing via the bulb socket.7) Connect all 3 lights to the new housing with a twist8) Reverse steps 4 through 1 and you are done!Approximate time is 12 minutes for you first side, 8 for your second as you will get faster.....20 minutes total.Really updates the look of the truck and the DRL are plenty bright and noticeable. You’ll see I also have the LED blinks and NiLight 22” light bar installed.Also great additions.
Trustpilot
2 weeks ago
1 month ago