MS-10DT Metal Collection Commercial 320W Electric Meat Slicer w/ Teflon Blade

My KWS slicer is nothing short of fantastic. I got the Teflon blade because I slice a lot of cheese. I slice meat and cheese at least once a week in my home. I have diabetes and a heart condition so I really have to watch my diet. There are few ready made diet programs good for both kinds of conditions. You have to keep an eye on both fat intake and carbs. As a result keeping track of portioning is very important. The ability to slice meats cheese and other products with great consistency makes computing dietary intake very easy. You need the ability to slice thin or thick as you need to help make things easier. This slicer cuts from paper thin, literally see through slices, to very thick. I burned up a smaller slicer in less than six months. In that one from the beginning I could hear it slow down when slicing cheese. What few of the manufacturers tell you is that most of these machines are not meant to slice cheese. The Teflon blade has no problem handling cheese and is the only slicer I found in this price range that actually says it can slice cheese. (This model with just the stainless steel blade is not rated for cheese slicing) Even large cheese loaves are sliced easily. Clean up is pretty easy with this machine. It's a bit trickier than with the smaller machines but that's because the safety guard and screw system are heavier than the smaller machines. Once you try it a couple of times it's really pretty easy. One important point, and it's brought up in both the written manual provided with the machine and in the KWS video on how to clean your slicer, it's most important to wear cut resistant gloves when cleaning this slicer. The blade is very, very sharp. This machine arrived ahead of the promised date, and the packaging was very good. The construction is excellent. The first time I removed the blade for cleaning I had some difficulty removing the three Philips head screws. Luckily my son had a wrench that fit into the square hole in the blade shaft. ALL the screws are tightened very well. No problems with any of them coming loose. The slicer is quiet when in operation, and the controls are all in logical places. Easy to see and use. The tray is big enough for anything I have tried so far. The slices are all uniform and the blade cuts completely through the meat or cheese without any uncut edges that formed a flap like protrusion that was left after some cuts when I used my last slicer. I would recommend this machine to anyone looking for a good slicer with a very reasonable price.

The KWS MS-10DT is a well-built, smooth running machine that cuts meat beautifully. I've cut many cold cuts in varying thicknesses, semi-frozen beef for Italian beef, and homemade bacon. The slices are consistent end-to-end and top-to-bottom. It even cuts super-thin slices dialed down at a 0.5 setting. I chose this model for two reasons: reviews (faith/hope) that it would slice thin and even, and for the blade removal tool. After watching cleaning videos I decided it was too scary without one. This was one of the few brands in the 10” class that had it. I was disappointed that the less expensive MS-10NT didn't include one (and you can't easily add it – the tool requires matching holes in the blade). I should probably ding it a star for these but I won't because I'm so happy with the cutting performance. 1) Even with the Teflon blade, slices occasionally stick, get pulled through and flung out the back. I think a slice guard that is larger with a tighter fit to the blade would stop this. 2) The first down-facing pin on the product grip is a thick piece of plastic to keep the grip from banging on the product tray. However, when slicing a long, thin product (ex. pepperoni), this is the only tooth to grip it and it doesn't do a very good job. 3) The gap between the blade and product tray should be smaller. Combined with the length of the teeth on the product grip you're left with a substantial sized meat-end that can't be sliced. A few things others have noted: 4) You can't cut full length bacon. This is just a fact for any 10” machine. 5) Cleaning is a bit time consuming but no worse than any other slicer of this type. 6) I never had the slicer slide around. Just keep the feet and countertop very clean. 7) The slicer DOES slice completely end-to end. Just make sure you push the tray all the way (compressing the spring underneath). It might be a little easier if they had used a rubber bumper instead of a spring. All-in-all I'm happy with the machine and would recommend it.

This slicer is fantastic. Well made. Slightly smaller than the huge ones you would see at a deli counter but without loosing the quality solid feel when working with it. This would work well for a small to mid size caterer or in my case, someone that wants the pro-level slicer at home. It stays firmly put on the counter while you are using it and will cut paper thin slices. I’ve wanted one for quite some time. This one for me is the best value for the money.

This is a very good meat slicer. it cuts cold cuts like cutting butter.

Fist time to give a trial on this meat slicer brand. Make me disappointed right the time opening the box. The reason I chose this model because it has anodized aluminum base which seems to last longer and the blade removal. but the base was not treating well, it is showing up so many black tiny holes on the surface, what they call is cosmetic imperfection. Which is unbelievable of quality control, before shipping out they need to make sure everything is good or not. and it took 1 week for this shipping from US. Second, when is coming up with the customer support, I asked them if they can replace the new one, as this is for my wife Christmas gift, and I don't want to have a refund, they keep asking me to work with Amazon, and Amazon asking me to work with seller (playing football). And finally, have to return and get my refund. Very bad experience on this brand now. I will not recommend to anyone, who is looking for the first meat slicer like me. It's ruined my Christmas cooking plan

buena maquina, se siente profesional a un buen precio recomendada

Love how great it shaves meat!

This slicer is heavy duty, quiet and can slice prosciutto and other hard meats very thin. It is working well.