GreenForest Bed Frame Twin Size 14 inch, Heavy Duty Metal Platform Bed Base Mattress Foundation No Box Spring Needed, Black

I really enjoy heavy duty bed frames so I can “let go and freefall.” (KAYTRANADA & Durand Bernard) my precious heavy duty bed was a different style and was unfortunately broken during a move so this was my replacement. The assembly was NOT fun by any means. Very few parts of the bed had the sticker to identify the piece to follow along with the instructions. The screws and such either had 2-3 different letters or none at all. I had to try the screws to see which ones went in far enough in order to determine if they were the correct ones. It took several glasses of wine to develop the patience to put it together. Once it was together though, it’s very sturdy and worth the money. I would suggest all buyers over 21 to sip before opening the box for your sanity.

I am writing this review just 3 Months After i bought this cheap ass frame. The frame is warped and eventually will bend. I am 5ft 3 and 198. My frame should have lasted for a ling time and now i am having to purchase another frame because my entire mattress fell through the frame!! Every steel bar that holds my mattress up is now warped and bent. Please if you can....find another brand. I am truly upset that i wasted my money on this product.

When I purchase a frame specific to the size I want I expect the mattress to fit on the frame with no issues or extra room such as pictured. Pretty disappointed. My son (3.5) has already found this end to be a step to climb up, fell through and was scraped. To say I’m unhappy is an understatement. Not entirely sure the reason for the extra room on the end but now I get to figure out how to protect it so my son doesn’t further get hurt by the frame.

I was not looking forward to the assembly of this frame but when I started everything went together easily and fairly quickly. All the parts were marked correctly. They even included an extra piece of each of the screws, nuts and caps. I thought that was a nice touch. This frame is very sturdy. I am a heavy guy and I felt completely at ease laying on it. Very well done. I would recommend it to anyone needing a very sturdy bedframe.

Rarely (especially with "box" furniture) do you get things that are well engineered and made with quality materials. This is definitely one of the rare exceptions. I had done a lot of online research before I found this frame. The steel used in the frames is thick enough to hold its shape without twisting or bending. The hardware was first rate. But I hope some of you find the following useful. When they send the frame it includes Allen Wrenches. They are good for the initial construction, but you will never get a secure tightness with them because you cannot get enough leverage onto them with an Allen Wrench. I took the advice of another reviewer and bought this set of Allen sockets.https://www.amazon.com/Neiko-10076A-8-Inch-Metric-Socket/dp/B000IQNMQU/ref=sr_1_7?crid=2BFUYP8X9FG8L&dchild=1&keywords=allen+socket+set&qid=1625453879&sprefix=Allen%2Caps%2C192&sr=8-7They have both long and short sockets but I bought the long ones because there are many times that you cannot get clearance for the ratchet head to fit into the corners that you want to tighten. I have put together a lot of box furniture which has had several different sizes of screw heads included, so I have been happy that I bought the set. You can also take the sockets off of the ratchet and use them as a type of screwdriver to get the screws started.I did do one modification of my own. The inner legs are held on by 2 screws through the slats. I added 2 additional screws through all of the other slats. Why? The design is good if you never intend to move the bed to clean. However if I wanted to slide the bed sideways to vacuum under it, I was afraid that the sideway motion on the inner legs might have a tendency to twist and bend sideways with the weight of the mattress on it. So I decided to re-enforce the inner legs by putting a screw through all of the slats. I used 1/4th inch self-tapping sheet-metal screws with a screw length of 1.5 inches. Be sure to drill a pilot hole before running the screw into the metal. It makes the whole process a lot easier. By using that screw length the screw did not go all the way through the leg bracket and stick out of the bottom which might tear anything stored under the bed. I think the screws should have been one size smaller, but these worked out fine and I already had a box full of them that I found in the street. (That was a win-win. I got the screws and no-one else got flat tires.) Also by doing that none of the slats rattle now, an important factor when making love vigorously. And last I like the fact that no box spring is needed. The box springs they make now ae crap with so few slats that the mattress buckles between the slats. Would I purchase another one? Yup. After the rest of the house is furnished I will get another to put under my own bed. Somehow the MASTER bedroom of any house is the property of the QUEEN and we surfs wait until later!One other plus with this bed is that should you decide to move, all you have to do is remove the 4 screws that hold the ""T" leg on and the frame splits in two making it much easier to load into a moving truck without have to make more room for a box spring. And it is a lot easier to get around angled staircases.

First, I'll say that it's worth the price. My previous bed frame had broken, and I needed something fast. This didn't cost much and it wasn't too complicated. I will say that when you assemble it, make sure you have room all around it so you can reach every screw. I was assembling mine in a corner, so it was difficult to get to some of the screws. I also had trouble with some of the last screws and had to put a little pressure on a bar to get the screw to line up with the inside. There were a few minor issues, nothing major. One or two items weren't labeled (one of the items actually had two different labels on it), but they were easy to figure out what parts they were. I've slept on it for two nights so far, and it works well. It's sturdy, didn't cost a lot, and does the job.

We received this frame in a box that was falling apart upon delivery. Which now seems small because of the other issues... Today we started to put the frame together and discovered there is no instructions, but found a short video for assembly which is fine...However there are 2 major problems....1.) We did not receive the bolts that hold the entire frame together?!2.) Secondly, one of the frames I’m assuming is (1) because some of the products have a number sticker and the rest do not, is lopsided and will not pull out in order to fix....I have attached a photo of what I mean.I am extremely disappointed with this product already and barely took it out of the box and this is already a major headache. Because the box is falling apart...I’m not sure how I can go about returning this product. I called the customer service number that I received from the company and no one ever answered, sent an email hopefully there will be answers or something that will be done from their part.