LH-X54W Square Metal Lens Hood with 49mm Adapter Ring for Fujifilm X100VI Fuji X100V Camera Silver

Love it! Makes my X100VI look more retro and “Leica-like”. The silver finish is, I would say, maybe 90% similar to the camera silver. The build quality feels nice, doesn’t feel cheap at all. The crisscross section of the adapter is smoother compared to the focus ring so it’s easy to distinguish between the 2. Now, for the most common complaint about the hood, I managed to get it as tight as possible without over tightening it while also maintaining the straightness of the hood. The red rubber o-ring helps in maintaining that hold on the hood really well. Although, the original Fuji lens cap fits, it’s a little weird when it comes to evening out the lens cap on the hood. Overall, I would say 9.5/10!

I was a little hesitant to order this lens hood based on all the reviews saying that it was misaligned and very difficult to put on, but it truly could not have been easier and took all of a few seconds. Even before writing this review, I unscrewed it and put back on my X100V to make sure it aligns exactly as it should, and it does. It’s easy to put on and take off, which I have to do often when I change out lens filters. I saw some reviews saying they had to tighten it to the point where they thought something might break; I didn’t find that to be the case at all, although yes, you do have to tighten it—but not excessively. The original lens cap for my X100V also fits perfectly on top of it. This lens hood is perfect. It’s a little pricey, but it’s beautiful, and it’s the lens hood Fuji should’ve made and included with the camera. If you’re worried, don’t be; just watch the video on the Amazon product page for this lens hood, and do exactly what the person does when putting the hood on the camera, aligning it they way they do. Worked for me.

I recently picked up this lens hood for my Fujifilm X100V, even though I didn’t necessarily need it, and I have to say, it looks incredibly sleek on the camera. The metal construction feels like great quality, adding a touch of sophistication and durability to my setup. I did encounter a minor challenge when aligning it correctly. Initially, I had to unscrew and screw it back on a couple of times before realizing I needed to keep turning it until it locked into place properly. Once I figured that out, it wasn’t an issue anymore, but it did take a bit of patience at first. One thing to note is that if someone plans to frequently remove and reattach the hood, the rubber ring might wear out quickly. This could be a concern for those who like to switch between using the hood and not. Despite this, the overall build and aesthetic appeal make it a worthwhile addition to my camera.

Got this for my original Fujifilm X100. It's very nice quality and honestly looks a bit off considering how new it looks compared to the rest of the camera but it fits very snuggly and there's no issue with the angle of the hood. *There is one small caveat and could be a deal breaker for some, but it totally renders the manual focus ring absolutely useless. The ring installs right up against the focus ring and you can't turn it because of how flush it sits. If that's not a problem for you (it's not for me) then this is perfect! Still loses a star because of it though.

Add beautiful look on your Fujifilm x100 series! I love it!

I bought this product to protect the lens on my Fujifilm X100VI. At first glance it looks okay, but I ran into a few issues: 1. The camera’s front ring isn’t easy to remove, yet the manual doesn’t explain clearly how to remove it.(Attach the original lens cap fully, apply steady pressure, and slowly turn it counterclockwise.) 2. After installing this, I can attach the original hood, but the build quality isn’t great. It doesn’t fit cleanly and ends up looking slightly misaligned—like it’s not fully seated. 3. The red rubber ring between the adapter ring and the hood makes my camera look unexpectedly cheap. Overall, it works, but the design and finishing details could be much better.

I have been using the x100 series since the first model which I bought in 2012. Having bought the V generation, I decided that it was time to stop using square hoods, which only add style and a lot of inconvenience, and even side light and glare they remove worse than a round closed-type hood, there are a couple of models on the market. But the sense of style won me over again and I decided to buy a square hood. Of the compact square hoods that do not increase the diameter of the lens in the corners (round closer to the camera and beveled in the corners into a rectangle), until recently there were only 3 options on the market made of aluminum (Haoge, Squarehood, YC Onion), plastic UN49 from a Japanese manufacturer, and only a couple of weeks ago the fourth option from Freewell was released, also made of aluminum with a built-in MIST + CPL filter. Having studied the market, I opted for Haoge. I expected that problems with this hood could only be in the alignment part, since many users write that it is very difficult to align it horizontally. But the problem came where you wouldn't expect it. I'm really SHOCKED! The adapter screwed into the lens and which is part of the hood, screws into the camera lens by about 1/8 turn, making this accessory a very dangerous addition to your expensive camera. With a very fine thread pitch, any accidental small impact will knock out the hood and strip the threads on your lens, which is non-removable and part of the camera. Thus, this device, instead of protecting your lens, only exposes it to an even greater risk - to break the entire camera. This is the worst accessory in all 12 years that I have had experience with X100 series cameras. But I am also surprised by something else. How come hundreds and thousands of bloggers consider this accessory to be of high quality?! The rating of this hood is almost 4.5 stars. SERIOUSLY? Guys, don't you have the basic knowledge to understand that screwing in 1/8 of a thread is very, very unreliable, risky, and of course, it's a mistake by the engineers who designed this GARBAGE. I advise everyone who uses this hood to throw it away and buy something more reliable.

Good. Perfect fit for my Fujifilm x100vi camera. I was able to use this with my existing lens cap so that's a plus. Looks good. The colour goes well with the camera body. I was also able to attach additional filters with this lens hood.

Good, just wish there was lens cap

وصلت بدون الادابتر

Good product and looks super nice on my x100vi

Fits perfectly on my x100v. If there is one comment I would add is that the genuine Fuji lens cap doesn’t fit well on it as advertised. It will go on but it’s not square and comes off easily