TINMORRYPLA Filament 1.75mm 1kg, Rapid PLA 3D Printer Filament, Compatible with Most FDM 3D Printers, 1 KG 1 Spool, Sky Blue

I got 2 3d printers and I printed PLA and ABS usually. Tried PETG now (did before another brand but found it hard as would do a mess on your nozzle - sticks to nozzle picks it up moves to another position and so on) and this brand of PETG is excellent!! No mess, no random deposits and the stringing is minimal (note that I did printed at 245 with bowden ) Very good surface and no warping. Also see the 3 Rd picture - that was done without support and I did expected to sag as the temperature was high - but it didn't, and came out maybe bit better then PLA! With a max fan of 40% variabile from regular 20 to 40%, layer time 10s, first 4 layers no fan. This was printed on a Tronxy xy2 pro mainly stock but well tuned the most important settings were: travel speed 120, 6 mm retraction at 20mm/s!, flow at 96% from slicer with a master flow setting via start gcode at 95% so equivalent of 92% flow overall. (This low flow setting might be specific to my machine but worth to try lowering it if your head picks up material and drops it randomly on your part). Part came out strong and flexible, came off the bed easy - so 99% as easy to print as PLA. So is very good and recommended! I would advice for anyone wanting stronger material than PLA but not as warping as ABS to spend time and dial settings for PETG as once you got it you will have the same results as PLA, but much stronger and weather resistant part. I will for sure buy more PETG from this company. And by the way they did sent a zip bag so I could store the old filament. Also please note I did dried the filament for 4 hours at 55 degrees even if it was vacuum sealed with silica gell in it, as I do with any filament before using it.

I extrude this at 200 deg C and 60 deg C bed temp.If your bed is clean, you should have no issues with adhesion. It produces a good finish and I've not had any problems once I got it dialled in.

I have had no problems using this PLA, its a nice shade of white, adheres to bed and prints perfectly for me at 210. I use it with my Anycubic Vyper. Would have no qualms about buying again.

This is pretty decent.I use this with a Flashforge Finder printer. I find the PLA filament made by Flashforge is slightly stiffer / stronger for the particular printed part I require. This is the only reason I have not given 5 stars. In an 'average' printed model / toy - No strength difference is detectable.The packaging is very good and even an additional sealable plastic bag included.I bought this for two reasons .1. It comes in 1kg reel, which I could not get from Flashforge (in this colour)2. Wanted to see what the finish is like . I love the copper finish.

Wow.... easy to print, barely any stringing and worked straight out the box with no drying required. Will definitely be buying this again

Never had any issues with this filament, I normally use various brands but i think I'll get more stuff from Tinmorry.I had some issues recently with the quality of my prints so I recalibrated the printer and really tried to dial in the settings but I would get various defects anyway, stringing, zits, under extrusion, all sorts of things, the random black petg material I had at hand was terrible but thankfully it ran out 25% into the print one time so I used some Tinmorry remains I had at hand that were lying under my desk for a month without even a zip bag on it and you can see the results in the picture attached, at the bottom is the random poor quality material and the top is black Tinmorry petg , kinda blew my mind when I've seen the result after comming back from work. and no I am not sponsored by Tinmorry just spreading the word :) I'm going to see if the other colours and grades of materials they make are good too

Using this filament for making cookie cutters for the wife!! Did a few experimental prints to get the right settings and on an Ender 3 I am currently on 235C hot end c/w direct drive mod and 70C build plate (PEI bed) with a 0.4mm nozzle, fan at 50% max after 5 layers.Prints are coming out great, up to now the filament seems to be decently wound and was dry when opening the vacuum packed filament. Recommended for those who have mainly used PLA and are looking to experiment with something a bit different especially when it's on offer.

I bought a new Eelgoo Neptune 4 Pro printer and bought a variety of different filament's and this one is the only one I cannot get to stick to the bed and print out correctly.At first I thought it was me not having the printer settings dialled in correctly, but I have done that now and after printing various models using other filaments I have tried this again over the weekend and all prints fail.Do not waste your money on this Black ABS as you will have wasted your money, its too late for me to send it back now and ask for different filament, but hopefully I will stop you from doing it.

Smoot printing!

Ottima qualità, si stampa facilmente

Garden design

Ottimo prodotto, il migliore effetto d’orato che abbia mai provato

Ik gebruik dit filament al een tijdje voor vanalles.De instellingen voor mijn Bambu X1C zijn: 255 graden en ee bed temperatuur van 70 (Pei bed)