Miracle Sealants 511 Seal & Enhance Premium Enhancing Sealer for Stone & Tile, Quart

This is literally the best sealer for natural stone. Used it on my patio. Yes, it’s expensive but it works without yellowing or crackling. Just enhanced your stone to original color.We have a travertine patio. I know miracle sealant makes a liquid specifically for more porous stones like ours but we have used this enhancer in the past and we are happy with it so we continue using this product.I literally and on all fours, with a paint dish and a brush. I brush the liquid on working in areas of about 20 sq ft at a time. Ones I have my little area all brushed up I use a rag and start at the stone that I brushed first and rub off any excess. Once done I continue with another roughly 20 sq ft area and do the same until done. You can take breaks in between or even wait days to continue. Still comes out looking great. Our walnut travertine had literally bleached to al ist white over the last two years since we didn’t treat it during that time and Miracle Sealant brought it back to life.

So I recently built (am still building) a house which included a cement tile backsplash for the kitchen. It's such beautiful tile and I it, but sadly after it was installed the dark (truffle) grout had stained the beautiful porous tiles and it looked not nearly as beautiful as it should have. After doing some research I discovered that others had fixed this problem by first applying Lemi Shine Detergent Booster (you can find it here: https://www.amazon.com/Lemi-Shine-Detergent-Booster-Ounce/dp/B00KOC6KEE) and following up with this product by Miracle Sealants.1 bottle of the Lemi Shine applied (with a large sponge) twice with vigorous and enthusiastic strength (and immediate rinsing of each area) removed all the nasty grout stains from my beautiful tile. As was to be expected though, this left the tile looking washed out, faded, and really dull. I allowed the tile to dry for a week, I'm not sure this was necessary, but the tile is porous and I wasn't taking any more chances.I then applied Miracle Sealants 511 Seal & Enhance Color & Gloss Enhancers. I applied two very thin coats of this, following the instructions provided and my tile gleams more beautifully now than when it was brand new on the display shelf. The colors are revived and brilliant! The design pops! It is not "shiny" at all. From a short distance it looks matte, and right up close it has a light satin finish, but from either vantage it looks amazing! I am so thrilled to have found this amazing product! It saved my kitchen design and my beautiful tile backsplash. I could not recommend this more highly!

We have two stone tables on our patio: a granite coffee table and a slate picnic table. We have been using Miracle Sealants SEENPT6 511 Seal & Enhance Color & Gloss Enhancers on both for years now ... and always get fantastic results.This product seals the stone and provides an attractive wet or glossy look when dry. Our experience has been that the seal will last two to three years. We live in Minnesota and leave these tables outside during the winter. The sealant does its job well ... keeps moisture and dirt from seeping into the stone. The attached pictures show how the sealant looks when dry. I would best describe it as a wet look that really brings out the natural beauty of the stone.We apply this sealant with a cheap stain brush that you can find at any big box home store. Work in small areas, letting the sealant seem into the stone. Do not try to spread it too thin. We have found that if you let it dry for 20 to 30 minutes, then apply a second coat you get the best results. The pint bottle we purchased was enough to cover two coats on both tables with about 1/3 of the pint left over.This product delivers excellent results and is well worth the price. Five stars.

Worked 95%! This got rid of the clr marks on my dark granite. Fir the most part. It didn’t get rid of all of the etching though. Still looks better than it did before.

Fantastic product, made my old slate table look brand new and still looking good after weeks in the sun. See the before and after pics attached.

Water really beads up on my new bluestone steps. Does darken and enhance the finish to an extent. I first applied one coat of 511 impregnator sealer. The next day I applied one coat of this enhancer.

Wish I had taken a before picture. This product made my slate bathroom wall tiles look like new. 25 years in place, and they were a little faded. I cleaned them with water and soap, and after drying overnight, I applied one layer of 511 sealer. I used one of those sponge pads on a dispenser, made for dish soap. Has a rough surface. I poured some 511 on it, and it spread very easily. The product doesn't dry so quick that you can't go over it to smooth out any lines. I covered the tiles that line my bathtub in just ten minutes or so. I used very little of the product. I let it soak into the grout, and it just covered and enhanced everything. Wiped a couple of drops off the bathtub with a kleenex. No muss, no fuss. The product dried completely in 48 hours. I had only learned about this product when researching it online and using Amazon reviews as some guidance. I'm impressed. Very easy to use and it looks great! 100% satisfied.

I used it in a new shower that I had those flat rocks put in the bottom of. When they're dry the rocks look very dull, but when they get wet the colors really pop, so I used this to see if I could make them look like that all the time, and it pretty much did. I didn't leave it glossy or anything but really brought out the colors. The rocks now don't really look any different when they get wet