Otley Computer Desk with Shelves and 3 Drawers, Home Office PC/Laptop Gaming Table, Study Workstation with Keyboard Tray, Furniture, White

The table has a terrible manual. It has the incorrect diagrams and doesn't give enough details, such as which way round certain boards have to be. Moreover, the stickers on the boards were incorrect, eg 9 was 6 and 4 was 5. Overall, the table itself is good and looks good. It has also helped me with keeping my room tidy.

***I have given this 1-star simply because I cannot give it zero*** Without doubt, the worst piece of furniture I have ever assembled. It’s hard to know where to start. The quality of the materials was shocking. The boards are made of a very loose pack chip board. One of the boards split in two, as I tried to drive in a screw (with a hand screwdriver, not electric). This is partly because of the poor quality chip board but also because there are no pilot holes for the screws. After this first mishap, I decided to drill my own pilot holes for the rest of the boards. The screws are so cheap that they snap while trying to screw them in (after two broke, I used my own screws). The guide holes for the keyboard tray mountings are in the wrong place (best part of 5 cm out) so there was no way the tray would fit. I drilled my own holes again. The holes for the handles, in one of the drawer fronts, were not aligned correctly, so I could not fit the handles. Had to recut the holes. The aluminum supports for the desk top are such low grade, I do not expect them to last. And they are so roughly cut, they have burrs all around and they are not the same length. I had to file one of them down. The lugs for the fixings are so poor, one of them snapped. Fortunately I have replacements. The runners for the drawers are badly assembled. There is no way to get a good mounting point at both ends of the runner. The keyboard tray mountings are very short. There is not enough space to fit a keyboard, with the riser clips down. This was not an expensive desk, but it was also far from the cheapest. For the money, I would have expected much more. The veneer is very cheap. Sharp on some corners. Chipped / broken in places. Even the packaging it was delivered in was very poor quality and provided little protection. In all, a very, very cheap piece of trash. By far the worst piece of furniture I have ever come across. I shall be impressed if it lasts a year. Please do yourself a favour and look elsewhere.

These instructions are not easy to follow. The brackets for the sliding keyboard drawer needs to be in the opposite L direction to what the instructions say so that they can hold the sliding table. The sliding runners also need to be in opposite to the arrows shown. The back board that connects the two sections is weak and not very secure, even with the desk top on. There are chips on most corners, luckily most hidden. The drawers don’t sit right on the runners and the large drawer falls off the rail, despite it all being done right and secure. We even put extra screws in! There are no pilot holes for the feet, and the instructions don’t tell you which way round the bottom boards need to be. The gap where you can sit is only 54cm which is ok, unless you have a chair that is wider.

The finished desk is actually very sturdy. However the build process was far from simple. I've built loads of flat pack items, and this was by far the worst, as the instructions were wrong, and in some cases, you needed a magnifying glass to see some of them For example - Items 8 & 10 were either wrongly labelled, or the instructions were wrong - We were missing 2 dowels and 1 screw (luckily I have spares from previous builds) - The fixing for the keyboard draw shows they face outwards (magnifying glass was required to confirm), but actually you need to face them inwards. This you only find out when trying to fit the keyboard draw, which is the last thing to fit. So you then have to take the whole top apart again to make this change.

As some other reviews have said the instructions could be better, and there are some scuffs and marks in certain areas however this desk still looks incredibly good and works perfectly for me and I strongly recommend it if you’re looking to build your own setup, it has just enough room for my gaming laptop, and a 27” monitor with much room for my Xbox, keyboard and mouse etc. strongly recommend, very spacious and looks lovely

I'm giving this 2 starts simply because it's a decent, solid desk for the price, but other reviews are correct that the instructions are appalling! Mine didn't actually have the courtesy to come with any instructions, but fortunately (or maybe not) it was easy to find them online. But oh my gosh, pieces were incorrectly numbered - luckily I noticed that a drawer and a cupboard side shouldn't go together before I screwed them in, the screws are so short on the feet that they fall off if you're not careful, the drawers catch on the screws if you use the holes provided, and do yourself a favour and get some decent screws for the keyboard tray because they are so soft that they can't possibly be screwed all the way in without disintegrating! The instructions aren't clear, they show screws that don't exist and sometimes it's difficult to tell which way up the pieces should be. Ultimately though, if you have built flat pack furniture before, and you have a little common sense, it's quite a nice, solid desk. The drawers are a little flimsy, but I'm pleased with the final result.

Vague instructions, mislabelled parts, predrilled holes missing on some pieces, unfinished edges on the pull out shelf and keyboard tray, missing screws and the worst part... the draw bottoms were completely missing! Whoever designed this has clearly never actually assembled the desk from the instructions as they would know that when you get to step 12 it's impossible to physically get the really long screw into the hole due to the desk shelf being in the way, and there's no way around this without disassembling the entire unit to get the screw in, and even after that you can't screw it in as theres not enough room to get the screw driver in! Unless you have one of those L shape things that Ikea normally supply with their kits. Predrilled holes are missing from the keyboard tray and pull out shelf so mounting the brackets is a matter of trial and error, and these pieces for some reason are unfinished on all sides except the very front which must be a manufacturing error as this is not like it in the photos on the Amazon listing. Two of the parts were labelled wrong and the instructions very badly done without showing all the steps and the pictures don't clearly show which way round things go and the drawings differ in places from the actual objects. Three long screws are included for the corner shelf, but they supplied only two and the third is actually a longer screw for a different part of the desk, so cannot install the corner shelf. Drawer bottoms completely missing and Amazon unwilling or unable to send replacement parts. All they would offer is for me to send back for a refund, which would mean even more hours of disassembling the whole lot again and repackaging! After being on the phone for nearly an hour to several call centre staff and after speaking to the supervisor they eventaully offered a discount instead. DO NOT buy this desk, you will regret it too. It looks like Amazon are discontinuing these now, maybe due to all the complaints.

Very nice desk for its price. Assembly was not complicated but it took time... I would recommend electric screwdriver and a very good one. I started with manual one and after 2 hours my hand hurted a lot. Then I had to be creative to install double monitor rack. But end result is very good. Drawers are very solid and I don't expect them to break as in other desks.