Hengja - The Desk Headphone Stand Hanger Mount, All Metal, Rotatable Mount, PC & Gaming Headset Holder

If your looking for for a simple cheap place to. keep headphones, this is a good looking option. I was looking for a holder that didn't take up. much space, was well made and that could be mounted to a desk edge. This is a much cheaper option than many "stylish" headphone stands, but doesn't feel cheap at all. Often finding a cheaper alternative online, you will buy a product that looks good in pictures. Then when you receive it, the materials quality and fitment is terrible. This was a nice surprise the everything down to the paint finish feels quality and more importantly durable. The easy adjustment for desk thicknesses and included multi-tool meant that I had the mount installed in less than 5 minutes. The plate the headset sits on has a slight curve and was large enough that, my headphones, even with a very soft headband cushion wont have permanent deformation from hanging. The only issue I had was the bolt that adjusts the clamp width was very thight from the factoty. I had to clamp it to a different surface to get enough force on the alen key to break it free. This is my second product from Brainwavz and am very pleased. Overall if you dont want to go crazy with a dedicated place to stash headphones but would rather not just use a hook from Home Depot, this is a solid choice. You get what you pay for and the extra cost feels 100% justified.

This is a very, very high-quality headphone holder. The 3 things I LOVE about it are: 1. High quality build. It's built of thick metal with a very hard, matte coating of paint. 2. It can be mounted to a horizontal surface (such as a desktop, table top, shelf, etc) OR a vertical surface (such as a desk leg, bookshelf side, etc). I chose to mount it to a desk vertical support just below the desktop, that way the holder won't take up ANY of my desktop surface. 3. The actual holder where the headphones sit is curved. Too many companies make a flat surfaced headphone holder. Over time, the corners of that flat surface will be evident on the headphone band. So, to be fair.... here are 3 criticisms of the headphone holder: 1. The round, silver part of the clamp is fixed on the screw that you use to tighten/loosen the clamp. It would be better if the round part was able to swivel on the screw as you tightened it. This would prevent the silver clamp from marring surfaces. 2. The screw which holds the headphone holding piece to the mounting bracket piece(s) sticks out to where your headphones go (this is visible in the product photos). It isn't a sharp screw, so it shouldn't scratch or damage anyone's headphones, BUT it does take up some real estate which may be needed for large head bands. It's not an issue for me, but it may be for some. 3. Um.... nope. I don't have a 3rd criticism. A couple items of note: 1. I don't see anything about a warranty listed in the product description. The product box states that there is a 12-month warranty. However, the documentation included inside the box clearly states there is a 24-month warranty. With that said.... I don't think anything could go wrong in 24 YEARS with this... maybe it would start to rust at some point, if exposed to enough moisture?? 2. Seemed some other reviewers didn't know what to do with their headphone cords and said they still hang down to the ground. The easy solution is to wrap/loop the cord up and place it on the headphone holder first, then when you put your headphones on the holder, it'll hold the cord in place. I think that should work for all but the largest, fluffiest headphones.

Title: Brainwavz Hengja - The Headphone Desk Hanger - Review Name of Product: Brainwavz Hengja - The Headphone Desk Hanger URL link: [...] Type of Product: Headphone Hanger / Stand Specifications: Weight : 112g Clamp Depth : 40 mm Plate Depth : 50 mm Plate Width : 45 mm Max Clamp Size : ~40 mm Min Clamp Size : ~14 mm Material: All-Metal What does BrainWavz promise to deliver? ~ suitable for large or small headphones at almost any weight ~ no bending with heaviest of headphones ~ comfort and style for your headphones ~ horizontal or vertical mounting Does BrainWavz deliver on those promises? ~ M50X's weigh 285 g (10 oz), without cable and connector. I dont doubt this hanger could hang THE WEIGHT OF 20 pairs of ATH M50Xs. There is room enough for a set of cables and the headband width of my ATH's, no problem. Im thinking wide head straps might have issues. ~ I dont know many people who LOOK for the heaviest of headphones, Im sure some people just end up with 'em. Im sure this can handle whatever you place on it, however you mount it. ~ I think style and comfort are a personal thing. I bought this because of the care taken to copy the curve of the headband. I like it's not taking up real estate on my over-crowded upcycled closet door that acts as my desk. To go further I also like the color scheme as it tends to go with the colors on my cans. ~ I use it mounted vertically. I have it mounted to the side panel of a small book case that acts as the left legs for my desk. No worries of slippage after tightening pretty tight. How much does it cost? (current prices at time of review) 14.99 @ amazon https://www.amazon.com/gp/product/B012VIWG28/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 15 @ brainwavz http://www.brainwavzaudio.com/products/hengja-headphone-hanger How easy is it to use? very easy How easy is it to learn? very easy How long might it take to see results? 5 min to unpack and mount device then mount cans. Summary (The good the bad the ugly). I looked around at stands for awhile. This one stood out to me for the small footprint and out of the way nature of the device. It allows me to hang it under my desk within reach yet out of the way. Cost is in the sweet spot. Design and function are also in the sweet spot. The only things being an upgrade to this would be: a slightly longer platform to hang cans on a quick release device like a bike wheel to replace the current mechanism. I foresee nice and tight and no tools to lose being a win. Id pay $4.00 more if it had quick release. This fits my need and would consider buying another just to have a place to hang the cables I use when not bluetoothing.

I bought it for Rs. 900. And although slightly higher in price, the quality says it all. It is all metal, feels sturdy and looks good. Ships with a key to fasten the clamp and is very easy to install either vertically or horizontally at the edge of the table (I use the horizontal configuration to hang my SteelSeries Headphones). Its wide enough to support even 2 inch think tables, and clamp can be tightened to support thinner surfaces. Pros: - Good quality - Looks cool - 2 year warranty - No hassle installation and removal - Headphones doesn't occupy any space on the table, keeps my surface clutter free, as they can be hanged from the edge Cons - A bit pricey For me pros outweigh the cons.

Non si tratta certamente di una soluzione a basso prezzo (io l'ho pagato euro 14,99) e cercando si trovano alternative ben più economiche, ma bisogna riconoscere che vale il suo prezzo sia per il materiale metallico con cui è realizzato, la verniciatura, il funzionamento perfetto e la solidità che trasmette una volta piazzato. Senza dubbio un prodotto d'eccellenza. Viene fornito con una chiave a doppio uso, da un lato cacciavite a taglio necessario per serrare la vite con cui lo si stringe al piano su cui si desidera collocarlo, dall'altro una brugola necessaria a stringere o allargare la presa per adattarlo allo spessore del piano su cui si intende collocarlo. Io lo utilizzo su un piano standard spesso 25 millimetri che corrisponde all'apertura con cui viene fornito dalla fabbrica ma si può stringere per piani più sottili e allargare per piani più spessi (dalle prove fatte, credo possa arrivare a mordere in maniera salda un piano fino a 45 millimetri, oltre non saprei). Per chi ha chiesto informazioni sul peso che può reggere, trattandosi di un gancio per cuffie non ci sono problemi di sorta per quell'utilizzo poiché, a mio modesto avviso, vista la saldezza che presenta sul piano di 25 millimetri in cui l'ho collocato, potrebbe tranquillamente reggere un peso fermo anche di 2/3 chilogrammi senza problemi quindi certamente oltre ogni cuffia. Giancarlo

J'étais habitué à poser mon casque (sans fil) sur mon bureau. Je suis tombé sur cet article qui me va parfaitement, que j'ai préféré à des supports se posant sur le bureau directement (plus encombrant). J'ai eu un peu peur quand à l'épaisseur de mon bureau (+4cm) mais finalement, aucun soucis. J'aime : - La qualité du produit, des vis, le cintre tient parfaitement en place. - Possibilité de le placer sur un support vertical ou horizontal. - Il n'est pas si moche que ça, on pourrait croire comme ça, mais même directement fixé au bureau, ça passe !

It is good that it comes with the adjustment screw that allows it’s to accept thicker desk. But it’s so cheaply made that the screw are impossible to remove… the moment I tried to remove it with the screw it comes with. The damn thing strips

Fast delivery and it will be a great place to hang my headset on when not in use or after hours