Johnson HardwareBifold 72" 1700 Closet Door Hardware

Easy to install,good directions, doors hung nice.

The brass pivot pins at the floor were a great replacement and will last forever. I was constantly adjusting these doors. Now they are set, and should not move.

Bought these to hang some heavy slab doors and they are working well. I think they could be a little smoother, but that may be because the doors are almost too heavy. Also, because the doors are a tad too thick, you can't use the floor guides that come with it. That is a bummer and I have not found a good alternative. I give it four stars because it is heavy duty and easy to install. Seems like good quality. I think I am just using it for a little more than it is designed for. Also, wish you could order just the track and not get all the other hardware.

I bought this hardware to use instead of the cheap hardware that came with a pair of bi-fold doors, and I'm sooo glad I did. Installation was a breeze, the components are easy to adjust, hold firmly when tightened, and the doors open and close smoothly and flawlessly. The directions, while not 100% thorough, are easy enough to follow. The included wrench was rather useless because it doesn't fit tightly on the bolt heads. No problem though because the head also accepts a phillips head screwdriver.A word of caution: when I ordered, the stock image on Amazon showed a stainless steel rail. However, a quick jaunt over to the manufacturer website confirmed that this model (1700726H) refers to the BROWN rail. For most applications the color won't matter because you'll probably cover it up with trim anyway, but you should confirm the color before ordering in case you are planning on leaving the rail exposed.

First, Kudos to Hearthstone for replacing the first bent and twisted track that came initially. Had a new one in two days via expedited shipping!!! Communication was easy in dealing with them.Everything went along fine (using the video installation guide) until I mounted the doors. My closet opening was about one inch wider (73+") and I had to center the track. When the doors went on, they closed neatly and evenly on the left side, but I discovered the right-side doors were a lot wider apart when in the open position. This presented a problem with opening two dresser four-drawer units about 33" wide each.I removed the top and bottom pivot pins on the right door and re-installed them about 1/2" further from the edge, thinking that would alleviate the door issue. It was better, but I still had the same issue and removed the pins again and moved them about 1/4" closer to the edge. I filled in the screw holes with bamboo skewers. You have to be careful as hollow core door ends are pine and tent to split (use a small drill bit for a starting hole). This did the trick and they now open and close with both sets of folded doors 'stacked' evenly, allowing enough space to open the two dressers.A lot of thinking; adjusting r/s jamb bracket and struggling with installing pivot pins in the track which would have been fine if the opening were smaller to begin with. Luckily, I had my son to help with that! So, check your closet opening width and possible install a spacer board to close up the opening. All in all, I'm happy with the installation and the doors look and work beautifully!

I replace the hardware that came with the original closet door package. I had install one and the track bent and deformed quickly after installation. This was fairly easy to install and fit very well. The hardware is solid and much better quality than the original hardware that came with the doors.

This was a great replacement to a broken up track I had for one of my closets. All the screws and parts needed were in the package. Solid construction. The instructions may not be the easiest to understand for some people, but it does explain and show distances perfectly. It can be installed by one person, but might be easier with a second person to help hold things in place or guide into their proper locations.The door knobs they included in the package look terrible. I discarded those and replaced with some better quality ones for the doors.

This is day three and I'm still trying to get the second door locked in the track. Once the peg is lined up in the slot, you then have to lift the door and pull at the same time for the peg to latch in place. It also appears that 17.75" doors are too wide. Door measurements should be changed in the listing. The tool included to adjust the lock mechanism is worthless.