Vanguard Alta Pro 263AB 100 Aluminum Tripod with SBH-100 Ball Head for Sony, Nikon, Canon DSLR Cameras, Black

Bought this to replace my wife's amazon basics tripod. Huge upgrade and well worth the money. In fact for around $150 it is a great value. The ability to reposition the center post at any angle has been incredibly useful for macro photography, as well as wildlife photography where one might find themselves having to sit in odd spaces for a long period of time to get a shot. Very solid build, the head tightens down very solid, no unwanted movement. The plate-lock for the camera is very secure too. I wasn't sure about it but the dual lock system keeps everything very secure. After about three months of moderate use for outdoor, wildlife photography, photography, and indoor macro photography, this thing is showing no signs of quitting any time soon. I highly recommend it.In response to many reviews that comment that one or more leg locks didn't work on their tripods: I had one leg that wouldn't lock, when extending it, the leg would open all the way to the 80 degree position, unlike the other two that would stop at 25 and then 50 degrees. It seems this problem is the result of a stuck release button or locking bolt (when open all the way you will see a rectangular "bolt" that retracts slightly when the release button is pressed). This problem was easily remedied by first giving a quick blast of air from a compressed air can (like what you use to clean the dust out of your computer) to remove any possible debris from the release and then carefully applying a few drops of household 3 in 1 oil to the bolt and under the button. Careful to use just a small amount and not get it on top of the button or where you might handle the tripod (I found holding the tripod upside down while depressing the release button of the leg in question provided ample room to apply oil under the button). Work the release button for a minute to get the oil into all the moving parts. All 3 legs now function properly on my tripod. If you do this, give it a couple days before using in dusty conditions so that excess oil can "dry" a little.

Having only an old and kind of heavy tripod—but using lighter mirrorless cameras these days—I needed to find a lighter tripod. I checked out several brands. The Vanguard gets my vote.>> LegsOut of the box, they are neither too stiff nor too lose. They feel just right. In the event they need tightening, the company supplies a tool for that purpose.When the tripod is set up and everything is tightened down, it feels super solid.>> BallheadThis looks like a high-quality item to me, but it uses a proprietary attachment system—it isn't Arca-Swiss-compatible. Newer Vanguard tripod/ballhead kits all seem to have Arca-Swiss-compatible heads. I don't want to discard my camera's great hand grip with its Arca-Swiss base plate. Fortunately I have a good replacement ballhead that I can use instead.Too few manufacturers pay enough attention to the feel of their tightening knobs. The ones on the Vanguard ballhead are comfortable to hold and turn.>> Proprietary ballhead attachment systemI might not be able to use it myself, but that aside it's clearly well made. The supplied camera plate has a sensible design for the attachment screw, so you aren't out of luck if you need to attach it but don't have a flat-head screwdriver or coin handy. The plate slides into place and locks there. Press a small button at the open end of the clamp to release it—the mounting plate slides right out. This seems like a very solid design, surely capable of holding a fairly heavy DSLR with the ballhead remaining locked down nice and tight.>> Center columnThe column is hexagonal, not round. It feels solid when it's tightened. It can't be turned within its housing, but when you have it upright, you can use the swivel adjustment elsewhere on the tripod.>> Release levers for changing leg anglesI'm used to seeing levers that stick out at the tops of tripods' legs—you push them inward or pull them downward to change the legs' angles. Some have a pretty flimsy feel to them. The Vanguard tripod has wide push-levers instead, mounted flush to the sides of the legs rather than projecting out from them. This arrangement works very well, and there's no metal gizmo sticking out the sides of the tripod to snag on anything. Thumbs up for this feature. (If it matters: the legs move silently as you change angles—no loud CLICKs.)>> Tilting center column designSome reviews I've seen complain a bit about the steps needed to move the center column from vertical into tilt "mode". Judging by video reviews, Vanguard's later models seem easier to tilt.But it isn't _that_ much more work. Set the column at the desired angle, then lock it by tightening a lever. With the lever down, the column locks securely and without any "slop". To unlock it, slide a small plastic slider a short distance. This frees the tightening lever, which you then lift to change the angle.Moving the column from vertical to "tilt"—or removing it entirely when you want to reverse it—does not require removing the spring-mounted hook at the end of the column. Thanks for that, Vanguard.When the column is in tilt "mode," you can swing it around until it's parallel to the vertical axis of the tripod. Then, adjust the distance from head to ground via a single tightening knob. Thus for reversing the column you don't have to pull it all the way out of its housing and then re-insert it upside down.>> Flip-lock levers for extending the legsI have one tripod with inexpensive-looking and -feeling levers, and they worry me. But the Vanguard's levers seem very well made. The tool supplied with the tripod enables you to tighten them if need be.This model has only two flip-locks per leg to get to its rated maximum height. That's great.>> Monopod capabilityIt's all the rage in recent tripod designs and it sure is handy. The Vanguard does not have such a feature. The legs can't be removed. But I knew that when I bought it. Nice to have, but not a deal-breaker.>> Carrying it aroundVanguard doesn't make the tripod to be folded back onto itself after the fashion of Three Legged Thing tripods. But, you can shorten it a lot by moving the center column to tilt "mode", extending it all the way, turning it parallel to the legs, and locking the tilt angle. This shortens it quite a bit. (If you fold it up this way, you probably shouldn't pick it up by holding only the center column. Hold the legs instead.)>> Nice touchGood deal: All three legs have foam wraps.>> Carrying bag? Nope.Nice to have, but not a deal-breaker.>> Nit-pick: DocumentationThe documentation is almost entirely pictorial and the diagrams are not the easiest to read. You do, so to speak, get the picture after a while, but the documentation could stand improving. (And hello, Vanguard: The PDF version of the documentation needs to be output again at higher resolution!)>> Nit-pick: Set screws to hold the ballhead in placeWhile this is a good idea to keep the ballhead from becoming unscrewed accidentally, it's a bit of a pain to loosen and tighten those set-screws within the mounting plate. But ok—it isn't as difficult as landing a rover on Mars. You won't have to do it often. The "multi-tool" supplied with the tripod comes with an Allen key of the necessary size.>> Overall impression <<This reasonably priced tripod is well made and very solid. The tilting design is excellent. I expect that the product will last a long time.

So I have both the VEO3+ 263AB 160S and the 263AB 100. I really love the features on the VEO3+ but the 263AB is really not far behind. It’s a little less weight (4.43ibs without ball head) and the knobs and levers are plastic and the VEO3+ is a bit better center weighted and is a bit heavier (4.67ibs without the ball head). If you have a bigger heavier camera or lens I recommend buying the BH-250 or the BH-300 and with either of these ball heads the tripods are really center weighted and support them well. I have a RZ67 film camera which is 6ibs and with that BH-300 it acts as if it’s a paper weight. The stock ball head on the 263AB is ok but I would recommend using smaller lenses (70-200 would be pushing it and BH-250 feels more safe.) but also it’s great to save weight if you are traveling long trips. I will be returning the 263AB because I enjoy the features on the VEO3+ more. I wanted to mention at these price points these tripods are amazing and you can’t really find a tripod this versatile with shooting at multiple angles. So if you’re on a budget or starting out ($150) the 263AB. is the way to go . If you have the extra money and want the fancy metal knobs the VEO plus 263 is the way to go. ($299 with tripod head)I also wanted to state that I recommend buying the tripods without the heads. The heads are really what matters to me because of the center weight, Weight load capacity, and variety of selections. The BH-100,200, and 300s heads are amazing heads for their price points.I also left the photos of the weights for the ball headsBH-160s (1ib) BH-300 (1.44ibs) SBH-100 (.94ibs).The VEO3+ comes with additional spiked feet and a MA-1 external mount for second cameras. It’s included in the bag which is zipped in the pocket.Next I will try the VEO3+ carbon fiber version and write a review about it.