What is this used for? what is the difference between this and an ftdi board?

What is it used for...that seems to be a big question as it might indicate that you might need a bit more insight in what all this is - I'll try to give some limited detail here: This little board converts UART TTL level signals (3.3V and 5V) to a USB level differential signal. It provides the most basic asynchronous serial data interface, which uses one TX line (Transmit) and one RX (Receive). UART = Universal Asynchronous Receiver Transmitter. Asynchronous means that there is no clock line and the receiver has to know how fast data is being transmitted. It will then sample that data with its own clock running 16 times faster than the known data rate. TTL = Transistor-Transistor Logic. TTL uses bipolar junction transistors to realize the logic gate functions. This leads to the generally accepted logic levels for TTL logic: 0 to 0.8V is a logic low, 2V to VCC (typically 5V but today also 3.3V) is a logic high. This is just what the FTDI converter can do. However, the FTDI converter is capable of providing control to other signalling standards (RS422 and RS485 - both use differential signalling - additional converters are needed with the FTDI chip to run RS422 and RS485). The FTDI chip also provides all the signals to run a full (old school) rs232 level converter. RS232 is a bipolar signal where a logic low is from -15 to -3 and a logic high is from +3V to +15V. The FTDI chip does NOT provide those levels - as mentioned above - an additional level converter is needed to do that. However, the FTDI chip provides the same unipolar TTL signals as the CP210X. Long story short - this is used for running simple serial communication from e.g. a micro processor to a PC, where the PC uses the USB interface and the microprocessor uses the UART interface. Generally you'll use it like this: 1. plug in USB to UART converter into PC USB port 2. in device manager (after some installation process of drivers) you'll find the new device listed under Ports (COM & LPT) - there will be a name and then (COM#). If there are several (COM#s) listed, then you need to unplug the newly plugged in converter and the (COM#) belonging to the new converter disappears. It'll come back once you plug the converter back into the USB port. 3. You open a serial terminal (e.g. TeraTerm or Putty etc) - in the terminal select the COM# that you found in the Device manager 4. in select the baud rate (the rate at which 8 data bits plus start, stop and parity bits if any (there is always a start bit), can be sent at a time) 5. you can now send 8 bit ascii characters to the UART side which will appear on the terminal on your PC - as well as you can type characters into the terminal that will now appear on UART side of your converter Don't know if that covers anything you were wondering about... Torsten

How can you switch from 3.3v to 5v operation?

The CP2120 has output pins for both 5V and 3.3V. You just choose which to use with your device. There are no jumpers or switches to change.

Can this configure a lilypad. I see it only has a blue light now but sometimes blue and red. is something wrong with it. Is there a online manual?

No manual i know of. But i never looked to be honest. I used this to connect the display to a raspberry pi 3 and a dvmega. The light only told me ot was powered. Good luck with you project

Desertcart Logo

Deliver to Senegal

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Description

🚀 Elevate your serial connections with pro-grade speed and stability!

ROCK SOLID STABILITY - Powered by the trusted CP2102 chipset ensuring reliable data transfer and minimal downtime.
BLAZING FAST DATA SPEEDS - Supports baud rates from 300 bps up to 1.5 Mbps for ultra-responsive serial communication.
PLUG PLAY MCU CONNECTION - Seamlessly bridge your microcontroller to any PC with universal USB Type-A and TTL 6-pin interface.
COMPACT LIGHTWEIGHT DESIGN - Sleek red module weighing just 9g, perfect for on-the-go prototyping and professional setups.
CROSS PLATFORM COMPATIBILITY - Effortlessly works with Windows (98SE to 10), macOS, and Linux—future-proof your projects.

The HiLetgo CP2102 USB 2.0 to TTL Serial Converter Module is a compact, reliable interface tool designed for seamless MCU-to-PC communication. Featuring a stable CP2102 chipset, it supports baud rates up to 1.5 Mbps and offers broad OS compatibility including Windows, macOS, and Linux. Its standard USB Type-A and TTL 6-pin connectors enable easy integration, making it an essential accessory for developers and engineers seeking efficient serial data transfer.

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.

31766CFA

Duties & taxes incl.

Senegalstore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

ChatGPT - opens in a new tab Perplexity - opens in a new tab Claude - opens in a new tab Grok - opens in a new tab Google AI - opens in a new tab

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Imran F.

Very reliable shop with genuine products. Will definitely buy again!

2 weeks ago

Sneha T.

Received my product in pristine condition. Great service overall.

1 month ago

View all Trustpilot reviews

Package Dimensions L x W x H	8.5 x 5.9 x 1.3 centimetres
Package Weight	0.02 Kilograms
Product Dimensions L x W x H	10.9 x 1.5 x 7.9 centimetres
Item Weight	9 g
Brand	HiLetgo
Colour	Red
Part number	3-01-0103-B
Size	Small
Guaranteed software updates until	unknown

HiLetgo CP2102 USB 2.0 to TTL 5PIN Serial Converter Module With cable for Linux, macOS, Win7, Win8, Win10

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions