Seems to bend a 3/8" radius. Is there some attachment or modification that can get close to a 1/8" radius?

The answer is yes, but it was not from the mfg. I made my own shoe. The one that comes with the break is 1/2" thick. I used a piece of 3/8 flat bar and cut it out and finished it on the milling machine. I milled the edge to a 90 deg. edge point. It works quite well.

To make a 36" wide U (outside measurement) using two 90 degree bends in a 3/16" x 2" steel plate, where do I start bending, at 34" apart?

Best is to use an extra section of your material for a test bend. Mark/scribe a line on the material and align it to the moving fixture on the tool. It should bend on your line. Be aware that the tool does not always make a parallel bend , so you might have to twist the material afterwards to make everything straight. A long piece like you are using needs to be supported so it doesn't move when you are bending it.

Has anyone has success bending 3/16" x 2" mild steel. I tried it and bend the pin that hold the top plate in place. Also broke the top plate

Same here. 3/16” x 3” mild steel, bent both the top and bottom arms beyond operational use the second time I used it. So I went and bought a bearing press from Harbor Freight and a press brake from Swag off-road. Have been bending 3/8” x 3” mild steel with zero issues. Wish I would have invested my money there originally.

I'd like to bend a U shape in 16 gauge steel (1" wide strip of steel) with the bottom of the U and both sides of the U being 3/4" length?

I don't think this will meet your needs. It works by pulling a 7/16" thick bar into a V-shaped notch (but with a U-shaped bottom, not a pointed one). The bottom of the V-shaped part that the bending bar presses into is approx 3/8" wide, so I don't see how you could get your bend to be 3/4" wide. It will likely be more like 1/2"; it's hard to say with certainty without actually trying it.

Desertcart Logo

Deliver to Senegal

For best experience Get the App

DOWNLOAD THE APP

WE SOURCE ITEMS FROM

UAE
UK
India
USA
Japan
KOREA

Customer Services

About Us

Customer Support

Description

🔧 Bend it like a pro — precision metal shaping made effortless!

COMPACT YET MIGHTY - 4-inch bending width fits diverse sheet metal projects
POWERFUL PRECISION - Delivers 2.5 tons of press force for flawless metal bends
BENCH READY EFFICIENCY - Easily mounts to any workbench for instant productivity
VERSATILE METAL MASTERY - Perfect for ornamental iron, mild steel, aluminum, and more
EFFORTLESS ANGLE CONTROL - Simple handle operation achieves up to 90° bends with precision

The KAKA INDUSTRIAL FB-4 is a compact, hand-operated steel bending brake designed for professional-grade cold forming of metals up to 4 inches wide. With a robust 2.5-ton press capacity and easy bench mounting, it enables precise bends up to 90 degrees on materials like mild steel, aluminum, and ornamental iron, making it an essential tool for metalworkers seeking reliable, flexible performance.

Reviews

A**R

This Is A Great Machine

I bought this because I want to put bends into 0.074 inch steel. Not to put too fine a point on it but the machine works perfectly. It would be nice if they sold different size mandrels, but the one that came with it is perfectly good. I expect many years of service from this machine.

10.07.2025

S**K

Nice light duty bender

Used for 3/8 aluminum rod worked well

29.09.2024

P**E

Great tool for the price

Use this tool to make motor mounts and brackets for my car project. Bent 3/8 inch steel and quarter inch aluminum without problems. Tool seems durable and will probably last a long time.

19.10.2023

C**Y

Well made.

Difficult to use, especially when tying to bend on a straight line. Bends are coming out crooked since the alignment line gets hidden when the metal is installed.

7.09.2021

E**C

Mark the face and set location

The media could not be loaded. Mounting it and adding some cheat bars helps tremendously for doing multiple bends and I used a digital angle finder to find my sweet spot

21.05.2024

F**T

Works well

This tool works and its well made.

14.06.2024

T**R

Works good but….

It didn’t work very well then I noticed that the top strap was in a bind and wouldn’t work properly. Then I compared it to the picture on the box. That top strap is on upside down. Remove the pin, install the top strap properly and it works great.

1.12.2022

T**S

It bends stuff

The bends are not square or even. Putting marks and setting the gauge. It's okay for rough fabrication but not finish work.

8.04.2024

Common Questions

Are the products genuine and authentic?+

Yes, all products are sourced directly from authorized retailers in the US, UK, UAE and India. We maintain strict quality control processes and verify each product before shipping. All items come with applicable manufacturer warranties and are covered by our standard return policy.

How long does delivery take and is it reliable?+

Delivery times vary by destination country, typically ranging from 3-9 business days. Each order is fully trackable through our system. We handle all customs clearance and use reliable courier partners for last-mile delivery. You'll receive regular updates about your order status via email and our app.

What is Desertcart? Is it safe to order from?+

Desertcart is an international e-commerce platform operating since 2014. We securely process thousands of orders globally each day. Every product goes through our quality verification process before delivery, and we provide end-to-end order tracking, 24/7 customer support, and a comprehensive returns policy to ensure a safe shopping experience.

How is product pricing calculated?+

Our prices include the product cost, international shipping, import duties, customs clearance, and local delivery charges. We handle all customs and import procedures, ensuring there are no hidden fees upon delivery. PRO members receive additional benefits including free shipping.

364990CFA

Duties & taxes incl.

Senegalstore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

ChatGPT - opens in a new tab Perplexity - opens in a new tab Claude - opens in a new tab Grok - opens in a new tab Google AI - opens in a new tab

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Sneha T.

Received my product in pristine condition. Great service overall.

1 month ago

Suresh K.

Very impressed with the quality and fast delivery. Will shop here again.

4 days ago

View all Trustpilot reviews

Manufacturer	KAKA INDUSTRIAL LLC
Part Number	FB-4
Item Weight	19 pounds
Product Dimensions	16 x 6 x 7 inches
Item model number	Fb-4
Is Discontinued By Manufacturer	No
Color	Grey
Style	FB-4
Material	metal
Item Package Quantity	1
Certification	(unset)
Batteries Included?	No
Batteries Required?	No