for iPad 7/8 (7th 8th Gen) Screen Replacement Digitizer Touch Glass 10.2", for 7th 8th Generation A2197 A2198 A2200 A2270 A2428 A2429 A2430, Full Repair Kit+Home Button[No TouchID Chip]

I ordered a new screen for my i pad. After installing the new screen the "log in" would sometimes not enter the number when I pressed it and at other times it would enter the number multiple times. I contacted the seller through the email on their warranty card. They were very prompt in answering all of my emails. They recommended a couple of things to try and fix the problem. I tried them and they did not fix the problem. I emailed the seller and they immediately sent out a new screen. After installing the new screen it worked great, Remember: THE INSTRUCTIONS TELL YOU THE FINGERPRINT READER WILL NOT WORK ON THIS SCREENI have several suggestions on installing the screen:(1) the shards of glass and the old adhesive are your enemy. You need to remove all of the adhesive and the glass shards or you run the risk of cracking your new screen. It will also block some of the new adhesive from sticking to the i pad frame. When you are removing the old adhesive I recommend using 90% rubbing alcohol, q tips, canned air, a small flat head screwdriver, and a magnifying glass. Blow out the i pad with the canned air. Use the air first when trying to remove anything from the i pad, especially the screen and LCD. Take your time removing the adhesive. you don't want to damage the i pd I used a magnifying glass to check the area around the perimeter to make sure it was perfectly clean(2) Attaching the three connectors with pins: I found it easier to place the screen horizontally on a clean microfiber cloth and the i pad and LCD were placed in a vertical position, with something supporting them. I used a headlamp and looking down the surface of the I pad, I could see both the male and female connectors. I was able to line them up and pressed them in.(3) I used magnifying glasses when I removed and installed the screws, Since the screws were different sizes, I put each size in small plastic container and sealed them, They are very small and are easy to lose. I did all my work on the i pad in a shallow plastic pan. When I dropped one of the screws it was in the i pad or in the pan,. (On an earlier project involving tiny screws I did not use a pan and one of the screws ended up on the floor. I spent a lot of time finding it.)These screws go into an aluminum frame and they are easy to cross thread. I start the screw by going counter-clockwise until I feel a click. Then I very gently go clockwise to make sure I am not cross threading the screw.(4) The sellers have a video on how to install the screen on their Amazon site. Review it several times. You may want to view other YouTube sites to see how other persons replace the screen on an i pad.If I had to do it all over again - I would!

I recently purchased this iPad replacement screen to fix a cracked display on my iPad (10.2-inch, 8th Gen), and I couldn’t be more impressed with the results. The screen came well-packaged with all the necessary tools, including a screwdriver, suction cup, adhesive, and plastic prying tools. The instructions were clear, but I’d definitely recommend watching a tutorial video if you’re a first-timer — it makes the process a lot easier.The screen quality is excellent. The touch response is just as good as the original, and the display is bright and sharp. The digitizer worked perfectly with no lag or dead zones. After installation, everything aligned well, and the adhesive held firm.What really stood out to me was how affordable this replacement was compared to having it done professionally. It saved me quite a bit of money and gave me a satisfying DIY experience. Just take your time during installation.Pros:• Great display quality• Responsive touch• Comes with all necessary tools• Good value for the priceCons:• Installation can be tricky for beginnersOverall, I’d highly recommend this replacement screen if you’re comfortable with a little hands-on work. It’s a solid fix and brings new life to a damaged iPad.

Had an old Ipad in the junk drawer with a broken screen, this replacement was easy to install and now i have a great ipod i can give my toddler to play with not endangering my good android tablets.Glass feels hard, very responsive to touch, easy to install and fits exactly as factory screen. All functions work and it is very worth the few bucks I paid for it. Image is clear and crisp as original screen.

I would have given a 5 star but the instructions need to be more accurate.

My son cracked his iPad when he dropped it in the driveway. My husband and I purchased this screen replacement with no knowledge of ever replacing or one. It did take about 2 hrs to fully take apart old screen and install new one. However, despite the length of time it looks brand new and is more protected now than before. You would never know it was even replaced or that we did it ourselves. Very do able just need patience and to follow directions very carefully. The directions are also very precise and helped tremendously by following each step in the correct order.

Company was great to work with!! Screen works like a charm!! 10 out of 10

Just bring your device to a technician as this don’t make sense and it’s not so easy to figure out. Bubble rap was great . If you know how to use this is a great value for the money. It was the right size and everything but I was not able to make it function. Screen was good and clean also.