TRELC Protective Pair Bike Handlebar Grips Bicycle Cycling Mountain Bike MTB Ergonomic

Like others, I was going to return these because the ends kept falling off. However, upon researching a new pair, I discovered that in order to install them properly, in some cases, as with mine, it was necessary to loosen the gear shifters on the handlebars and slide everything toward the center of handlebars so that these grips could be pushed down until the ends are flush with the outer edge of the handlebars. After doing so, voila, they fit perfectly and I was able to tighten the grips onto the handlebars. I guess that seemed simple enough, but if you've never installed these before, you wouldn't automatically know to do that. Now I know

"Super Simple Installation. It's really easy to install and adjust, only need a small screwdriver. Just about two minutes, you can have them securely installed, and you can freely adjust the angles for your riding preference." Incorrect however mine came with an Allen wrench.I thought I was getting grips with collars on both ends as per some other review pictures but the current description picture is correct. Installation was easy though I did use a rubber mallet and water. I did have to move my shifter and brakes in about 5mm to get the end collar to go over the bar so it would lock when tightened. I did run the bolt in and out once before installed to make sure the threads were clean. Overall, I think these are a good value for the money. The grips are broad, the rubber seems to be good quality and the horns are comfortable and the right size for me. (I wear a men's large glove).

The ergonomics of these grips are a huge improvement over stock grips. The palm supports definitely relieve stress in your wrist. The horns provide an alternate hand position and leverage. Overall, I'm pleased with the grips, but there's a couple of features that could be improved. First, the grips are a little hard. They would provide better shock absorption with softer material. Second, the grips are not tight fitting until the set screw in the horn is tightened. Currently, the grips have not rotated during use, however, should the end caps, horns, or set screws get damaged, the grip will rotate on the handlebars rendering the grips useless.

The quality of the grip is pretty good and they looked good on my bike. The only issue I had was the directions were just not very clear and every time I tried to tighten down the grip, I had to really pay attention that the cap and end stayed flush with the grip, or they would work their way off the handlebar the more I tightened the screw. And even then, the end and the cap would come off randomly. If they fixed that part of the grip, it would completely change my view of this product.

They're just super cheap. Cheap rubber, plastic parts, etc. The plastic parts on the side where you're supposed to tighten the grip and super low quality. It will not stay together. On top of that, they're very loose on my handlebars. TRELC spammed my email begging for a review. Here you go.

Love my new handle grips. They are not super soft gel filled handle. For the price I was looking for more surface area for fatigue. I wear gloves anyways so o was not worried. Exactly what I was looking for and the for the right price. For people having trouble installing you might have to move your gears in so when you tighten the grips they are on your handle bars. It took me a minute to figure that out. I quickly moved my gears in about a half an inch and slid them on a little further and have no issues!

These grips are heavy, made of uncomfortable material, and the bar ends will NOT stay on the handlebars. I put these on my bike and did a sample ride on my yard. When I pulled on the bar ends on a small incline, they came off. I then just immediately took the off since I would not want that to happen on a real trail. Get another brand if you're looking for grips+bar ends combo.

These handle bar grips are great. I have ordered more and have on every bike. My bikes average around 12 - $1500.00. These grips come with an adapter for smaller bar size. These grips are quality constructed, comfortable and become part of your suspension. I clean them using mild soap and a tooth brush to get into the grid - textured area. Then condition with a plastic-leather cleaner/conditioner. I also wear gel gloves.

Absolutely do NOT buy!!! Fails to tighten on handle bar and the end cap keeps falling off.

The product arrive quickly and the quality was as expected.

Easy install. High quality materials.

Grips seem solid and well made.

Love it feels really comfortable

The grip marked "R" fit better on the left, and vice versa. Big problem is the extension pieces are secured with a hex nut but aren't tight enough.

Works great

Look nice feel great just not built for all standard handlebars

some form of instructions would be VERY welcome, please ( I am trained as a machinist and am pretty mechanically adept) but these were baffling.