Crank Brothers Eggbeater 3 Pedals

I love these - strong, light and easy to engage/disengage.The clips they use are minimal as well.Neither the pedal or the clip get fouled with dirt/gravel/mud/iceCan be rebuilt easily and for low cost with a rebuild kit (by Crank Bro's)Only negative is they don't do well with pedal strikes on rocks (but then what does)Consider the crank brothers Candy or Mallets if your shoe has a more flexible sole, they have more area to catch the ball of your foot.

I have used the Time Atac Carbon in the past and loved them. These were cheaper and a few grams lighter so I decided to try them. So far they are working well. There is one thing that I do not like, but it may be great for some, they are super easy to get out of. I have not had an issue while riding, but you just pop out when you stop if you are not careful. I have switched the cleat to minimize this and it helped, but you will still have to be careful when stopping and then going again to make sure you are still clipped in. Other than that they have been fine. I only have about 50 miles on them so far so the jury is still out on how they will last. I've ridden all kinds of terrain and they seem to be great in anything.

Have only put about 50 miles on these, but so far they are working great on my cyclocross bike. For comparison I have been biking with SPDs for mountain and Look Keo's on my road. In my experience I do get a click noise when clipping in and have a nice secure upstroke. They are ridiculously easy to clip out of. I will replace my SPDs on my mountain bike too and get these for my wife for her cross bike.I just use them recreationally on the road, trails, and over grass and hard-packed trails.

Very light with an incredible minimalist design which I really like. They shed mud really well and are by far the easiest pedals to clip out of I've ever owned. However, I am still having a difficult time clipping in, and sometimes on 50k + rides with a lot of climbs I get a hot spot on the ball of my feet even though I've attached the crank brothers bicycle shoe shield. Overall, the jury is still out for me on these.

Can't say enough good things about Crank Bros. Eggbeaters. After years of resisting for no good reason i can recall, i jumped in and switched over my bikes to use the Crank Bros. models. I'm not riding to the level where i need the superlight titanium models, but i like the cost of these '3's' when they go on sale. If you take care of them they are almost no maintenance. I just refreshed my original pair after 5 years on my good weather commuter. Highly recommend these pedals.

Great pedals! Bought these for my brand new Bacchetta Carbon Aero 2. Have used Eggbeaters on 7 bikes now, including my 4 recumbent bikes. Easy entry and release. Just the right amount of float. Always works. My oldest Eggbeaters are 12 years old and still going strong.

Having already been a long time user of the Eggbeater pedal platform, I fully expected these to meet my needs to equip a 3rd bike and that they did. I like this pedal's internal configuration more than the lower spec versions. Meaning that this model has a needle bearing instead of a plain bearing on one of its two locations. This, I find, is a better and ultimately quieter running configuration.

run soo smooth. if you want them to be lighter just get some ti axels online very easy to replace

If I could give these pedals -1 I sincerely would. I’ve now owned two pairs of egg beaters and after the second pairs bearings collapsed after I finally admitted defeat. I’d wanted a change from my Shimano M520’s - a mistake I now regret. My replacement Shimanos have now covered nearly 4000miles with no issues what so ever. Good bye Crank Bros!

Siempre que esten por debajo de los 90€ no es mala compra...se pueden comprar rozando los 70- 75€ .Por poner un pero a estos pedales, es que no se puede regular la dureza del muelle . La otra pega es que las calas de latón se gastan más rápido que las de acero de Shimano.Características - Pedales Crank Brothers EggBeater 3-Peso (pareja): 280 g-Eje: acero cromoly forjado-Factor Q: 52 mm-Angulo de liberación: 15 ó 20 grados-Cuerpo: acero inoxidable moldeado--Aletas: acero inoxidable moldeado-Resorte: acero inoxidable serie 300-Rodamiento interno: aguja-Rodamiento exterior: de bolas sellado de EnduroIncluyen calas de latón Premium

Veramente eccezionali!!Prima di questi ho sempre usato pedali tipo spd ed appena caricavo un po' di fango non agganciavano piuQuesti invece sono fantastici, con le scarpe piene riescono comunque ad agganciare e sganciare perfettamente, veramente ottimi, ed esteticamente spettacolariPiccola pecca, manca la possibilità di regolare la durezza delle molle di aggancio/sgancio ma non mi sembra ce ne sia bisognoInizialmente le molle sono un po dure ed ho fatto fatica ad agganciarmi, ma dopo 2 /3 uscite lavorano alla perfezionePoi a seconda di come vengono montate le tacchette (incluse) si può scegliere sgancio a 15 oppure 20 gradiIn conclusione, acquisto consigliato!!

Los pedales en sí son excelentes, igual la calidad de Crank Brothers, sin embargo, en la primer imagen descriptiva se muestra el modelo 2016 (o más reciente), Lleva un empaque redondo en la parte inferior.El modelo que me enviaron es el 2015 o anterior, no tiene ese empaque. Se puede corroborar en la página del producto el nuevo tipo de empaques a partir de 2016.

I use these pedals on my road bike so that I share my shoes with my xc mtb which also use Crankbrother's Mallet style pedals. They are a little heavier than I would have wanted but I presume that since they are really aimed at mountain bikes rather than road bikes they are built to take more abuse than I would deliver in my application.Overall, they are easy to clip in and out and do the job admirably and I am happy with my purchase.