BestEvMod Compatible with Ioniq 5 Morse Code Emblem Front & Rear ABS Material Set of 2 (Hollow Out Matt Silver)

Fairly easy to install. Fits perfectly. Obviously the hardest part is removing the original emblem. I used a hair dryer and found it worked fine. Heat guns get way to hot for the paint job. Cleaning the old residue of adhesive took the longest. This product uses 3m tape so I'll update this review if it starts to come off. Can recommend this on first blush.

From BestEVMod I have purchased the following for my 23 Ioniq 5 - I will give a quick review for all:1. cloth cover for magnetic section on the dash on the left side - dont recommend2. (screen bezel protector) Blacked out dash sticker/cover - recommend3. lower dash cover door - eh. recommend if you must.4. matte '4 dot' plastic badges/emblems for front and back. recommend because there are no other options I could find but be prepared to do additional work.Before I start - this is a company making small batch customized products for a niche car (ioniq 5) for pretty low prices. This has to be taken into account. The company has quickly and helpfully taken care of all my concerns including sending me additional badges. If they could improve their quality and take a little more care when producing these products, they would be someone I would recommend. Im giving 4 stars because of their great support and the fact that the products 'mostly' work if you are willing to customize and do additional work.1. cloth cover. This is literally a piece of cloth you have to stretch over the magnetic square dash section. It is sketchy. You must stretch it significantly and the seams of the cloth cause the magnetic section not to fully want to reclip into the dash. Id avoid this product although, if you have to have it, I think you can make it work.2. The "screen bezel protector" or black sticker to go over the white bezel around the screens - this worked well. The fit seemed good except for a 1/32nd difference in the bottom right corner but after a few minutes messing with it, I was able to situate the sticker so that no white is seen at any angle and virtually no screen is covered up. I recommend it. Although it will NOT work with the fabric magnetic section cover (in my experience the overlap from the fabric caused issues)3. lower dash door - this is the little door that covers the opening below the dash between driver and passenger. The issue reported by everyone is the adhesive dosnt work. Im not sure thats the case, the issue is that the adhesive dosnt actually reach the contact points on the lower dash, a thicker adhesive is required. 3m auto tape seems to work but any thicker double sided tape should work. The door hinge and closing mechanism are of low quality and I dont expect them to last. If it breaks Ill glue some magnets to it and that should work to hold the door closed. I dont frequently use this space so I dont expect many problems but if you do, this product might not last.4. the new badges. (pics) The new badges were a headache. After the first order didnt arrive (4 weeks) the second order arrived in 3 weeks. 7 weeks later: the alignment pins were off on the rear badge. It didnt sit flush in the hatch recess (pics). Removing the pins solved the issue. The front badge wasnt painted properly and there was not enough paint cover on the edges of the badge (pics). I decided to clean it and repaint it and realized a small amount of acetone completely wiped the paint away (pics). In my inexpert opinion, no prep was done on the chrome/silver badge and someone just spray painted a matte finish on that product. I expect this matte black finish not to last. I sanded and repainted and then applied a ceramic coating. hopefully that holds better than the initial finish. They do look good. I have replacements that I was sent but they are not the same and I havnt had a chance to replace these as of yet.

Very good quality!

This emblem for my Ioniq 5 looked great until the black paint came off today. It’s garaged almost every day so you can’t blame it on the weather. Lasted 4 months😖. Now I’m stuck with a product that detracts from the look of my car!

Waited a few mths before writing my review to see how well the emblems would hold up.Happy to say they are still going strong and look great! We get a few looks from other drivers wondering what car we’re driving but it makes me smile.Pro tip for at least 2023 Ioniq 5 owners. Buy a cheap “plastic razor blade scraper” from amazon and gently release factory glue from OEM Hyundai emblems around the edges.Keep working your way inwards until OEM emblems pop off. Other DIY vids suggest a heat gun but that can melt your paint if you dont know what youre doing.

The emblem is larger than the pocket on both the hood and the hatch. because of the shape of the emblem, this puts a sharp metal edge on the paint surface and prevents the adhesive from touching the body. This isn't a difficult thing, and I seriously doubt Hyundai changed the size of their pocket. because it's a stamped piece, and not finished well, the edges are very sharp, and they sit on the paint that shows if a standard emblem is put back on the car. during installation and/or movement from wind, heat expansion, etc., the edge of the emblem will scratch the paint. I wouldn't have even installed the emblem had I not had extra foam tape to add a second layer to push the emblem higher in the pocket and off the paint. Because this is the only option out there, and I really wanted the emblem, I made it work, but I most certainly shouldn't have to.

Mine arrived with smooth edges and no defects. Easily applied and I’m satisfied (so far). It’s too soon to testify to its durability, which would add that fifth star to my rating. (Ignore the tinted headlights in the photo. That tint was removed after my first night drive test. Looked cool IMO but too restrictive and unsafe.)

Was nervous to buy, but happy i did! Yes it's cheap plastic, but so are most emblems! What's important is that it looks good, fits well, and adheres strong. Check check check. Taking off te old emblem was a little tougher than anticipated, but the finished product is worth it. The only question is will it last, but no complaints so far!