Relx Adjustable Outdoor Sign Holder Stand for Display - 8.5x11 inch Floor Sign Stand with Base for Business Retail Events - Vertical & Horizontal View Displayed

Purchased two of these to use to provide indoor signage for a holiday event (advertising Santa's hours). This is a high traffic event, and I had previously used a different (glass) set of stands. However, we moved the event to a different part of the building, and I was worried about the glass stands getting knocked over on hard flooring and breaking.So I purchased these stands. They worked great. Assembly took about 5-7 minutes. Easy to set up. A little tricky figuring out how to get the paper in the frame the first time, but once you do it once, it's easy. (There's a little suction cup that you use. Don't lose it!)Unfortunately, my fears were confirmed about the stand getting knocked over during the 7-day event. It did, and one of the frames broke. However, I contacted the seller about purchasing a replacement frame, and they kindly sent a free replacement frame. 10/10 on seller customer service!! (Also, I should have put water or sand in the base to keep it from getting knocked over so easily, but that's my fault!)

These are easy to assemble and use. However, they are very light weight so if used outdoors may need weights to secure from the wind. Would purchase again.

Only 4 stars because I thought I was getting 2 and I only got 1. Also it’s pretty cheap and flimsy but if you’re indoors you’ll be fine. I used mine outside and when the wind picked up it blew over multiple times even though the bottom is weighted. Easy to install but not super sturdy.

Easy to put together, andjustable in height and orientation of the frame, and pretty sturdy. It fit our needs perfectly!

I recently purchased this Sign Holder and overall, I'm quite pleased with it.Assembly was fast, taking just a few minutes to set up without any hassle.The quality of the materials is alright, and the stand is very sturdy, holding up well even in during a whole day convention with multiple people touching it and never fell or moved too much.However, I was disappointed to find that my frame arrived with some damage and the screen was scratched. It's a solid product that does its job well, but the damage upon arrival was a letdown.

This sign does need some simple assembly. The post is in several pieces, but is easy to put together. The actual sign part attaches to the top of the post by a large screw post. The sign part has a white foam board with a clear plastic cover over the front. There is a black edging all the way around the outer edges of the foam board, securing the sign part together. Then there is a flat circuliar disc base, which is fillable with sand or water. The disc is already heavy without filling it. But if you do fill it, that would add more weight in the base, and therefore help make the sign generally more stable for standing upright on it's own.After removing the protective film from the sign surface, then the sign will be ready to use. The clear plastic surface cover also must first be removed. On the side, blending in as part of the edging, is a small, flat, black slider piece. Moving this piece out of the way loosens the edging to allow the clear plastic piece to be removed. You can then place a printed sign before putting the cover back on, or I suppose you could just write directly on the foam board with washable markers.I do not yet know for sure how it would hold up over time if placed outside, especially in rainy or winter weather. This might be the kind of sign that is best used indoors. Or if it must be used outdoors, then perhaps do so on nice weather days. At least until you figure out the sign's possible weather limits.Overall, for the type of sign that this is, I currently believe that this sign is of decent quality, and does the job of being a sign quite well (outdoor use aside for now, as stated). 5 out of 5 stars.

Horrible Design - Requires the use of a suction cup to remove cover/change sign. I don't want to have to carry around a small suction cup every time I use this sign. I don't want to have to keep track of the suction cup in between each of my events - every single other sign holder I have does not require this. Other than that major design flaw, it's otherwise easy to assemble.

Out of the box, it's pretty easy to see the different adjustable features, which I liked. You can change the height, rotate it, and even angle the sign holder, making it pretty versatile.Setting it up was pretty simple; no complicated instructions or missing pieces, which is always a bonus. I was a bit skeptical about the base at first. It's this plastic container where you're supposed to put in sand or water to give it some weight. Over that, there's a metal cover which looks decent but the rubber edge installation was a bit fiddly.One thing that surprised me was the front portion, where you put the sign. It’s this clear film held in place by magnets. While I appreciate the inclusion of a suction cup to help remove the cover, I did wonder about how strong those magnets would be in, say, windy conditions.I've got other sign holders, and they typically have these heavy metal bases and frames that snap the sign securely in place. Comparing those to this one, I felt this might be a bit light for outdoor conditions, especially on breezy days. While it does seem durable for indoor use or maybe calm outdoor settings, I’m a bit hesitant to place it outdoors during harsh conditions.All in all, it serves its purpose and looks neat, especially indoors. It holds the sign well and the adjustable features are great. But if you're thinking about using it in more rugged outdoor conditions, you might want to weigh it down more or check those magnets. I'll keep using it, but probably more indoors than out.