926-959 926-876 Engine Oil Cooler 3.6 Oil Filter Housing,Aluminum Oil Cooler Housing Fits 2011-2023 Jeep Wrangler Cherokee Dodge Charger Journey Challenger Ram ProMaster Chrysler 200 300

Descent quality for the price. Definitely beats the $300 OEM housing. Great fit. Not to excited about the quality of the seals but they are doing their job so far.

This will work on all models 2011 and up, it will look a little different from your original 2011-2013 housing but it will fit, I drive a 2011 Caravan and it works fine just put a little oil on the rubber seals and take your time with it you are good just don’t over tighten. only 10ft pounds on the bolts.(A BIT OF A WARNING BEFORE YOU INSTALL THIS THING REPLACE THE OIL PRESSURE SENSOR WITH YOUR OLD ONE OR YOU WILL BE DOING THIS JOB AGAIN SOON) and if you can afford to change your Knock Sensors, now would be a good time to do that because one of my knock sensors went out the next day after replacing this cooler so you know I wasn’t happy.consider this cooler an upgrade from the old version, Your original cooler 2011-2013 has too many moving parts that will eventually breaks again, their is a spring that activates on the inside that “WILL” break apart and stopping your oil from being filtered, I’ve been changing my filter for over 2 years and didn’t know how important that spring was and that my oil wasn’t being filtered because of that broken spring until I did some research.This newer version is built different and was only installed in vehicles 2014 and up.So if you’re vehicle is 2011-2013 when you are buying your next oil filter you will need to get an oil filter for A (“2014”) or newer.The only thing you will need to worry about in the future is the seals on the bottom of the cooler gets old and give you another oil leak but at least you won’t have to buy another oil cooler

I saw a similar oil filter adaptor on a YouTube video and decided to replace my plastic oil filter adaptor just because. I am very glad I did. When I got down to removing the plastic adaptor I found it had been replaced before and it was beginning to fail and leak again. It was not serious yet, but it was on its way out. This aluminum replacement should end that problem in the future. One note: The screws, both on the one I replaced and the one I installed, are made of soft aluminum. Be very careful when tightening them down. They will not take much torque before stripping the torx heads. I had to drive a small regular socket onto the bolt heads to remove them from the plastic filter and stripped one during installation. The metal is very soft.

Solid piece. Had to grind a plug just a little for an easier fit, but worked great

Direct fit on my 2013 town and country.

1 star

Fixed my 2012 JK Rubicon with the 3.6 liter engine. The old one was pouring coolant down onto the transmission and all over the street, and this replacement has been working perfectly for almost a year..

Perfect