E-cowlboy 1 7/8 Inch Mainshaft Sprocket Wrench for 1936-2006 Harley-Davidson Big Twins & Twin Cam Engine, Socket Tool

This is a good investment the tool worked great preformed flawlessly used on 2000 HD Fatboy the aluminum piece that screws onto the shaft itself went on smoothly and the socket portion fit onto the drive pulley nut securely - great buy

Fantastic !!

Couldn't bring myself to spend the money on the Jim's tool. This worked perfect for what I needed. Quality seems to be pretty great.

I used my impact on it to remove the nut and it held up no problem.Now the bushing guide that screws onto the end of the shaft didn't go on. They did not cut the threads the same. But it is only made of soft material ( Aluminum i think) so you can start to thread it on then force it on a little at a time. Just turn it till it's really tight then back it off and then turn it till you can't again and back it off and eventually your spline threads will cut new threads into the bushing guide. Just make sure you put some oil on the threads before you start and keep adding a little oil while your doing it.This is not the ideal way of doing it, if you have the proper tap size is the right way but this will work. If you don't get to far carried away by doing it this way you will be fine. The shaft is made of alot harder steel then the bushing so you shouldn't damage the threads on the spline.

Fit perfect. Had no issues. Worked as intended.