JKS International 9904 1-1/4" Body Lift System for Jeep TJ

Nice kit,no need for linkage bracket, cable shifter upgrade only way to go when installing a body lift. Installed with new oe rubber body mounts 06 jeep wrangler rubicon

Really nice kit.You will need to go to a cable shifter for your transfer case if you want to retain a nice smooth shift from 2wd to 4wd etc. . The supplied linkage extension/relocation isn’t the answer.The Jeep doesn’t look silly like it would if it was a 2-3” lift. It looks stockish but give you that extra bit of articulation room/lift.

I ordered this lift at the same time as a JKS motor mount lift they both work great install was about 3 hrs on both. The only thing was I did have to use the transfer case linkage drop bracket included in the kit. In the instructions it states if you do the lift and the motor mount lift at the same time you wont need to drop the transfer case linkage but in my case I did. My linkage was binding and wouldn't shift without it. Over all good product now I can clear 33 inch tires with my 2 inch suspension lift and 1.25 Body.

Easy install but beware... you must remove the four screws attaching your fuel filler neck from the outer bezel surrounding the gas cap. THIS IS NOT IN THE INSTRUCTIONS. The filler neck's flanges ended up 3/4" too short after I installed the body lift. I had to loosen the hose clamps at both the tank and the filler neck... use a pick and spray PB Blaster in the rubber hose... then twist and slide the pieces apart in order to gain enough length to reattach the top flange to the bezel. I lucked out as I just so happened to decide to remove the bezel to repaint it with bedliner since it was looking 10 yrs old. Had I failed to do this, I would have broken the bezel.So the instructions could prove costly but the body lift itself is awesome and easy. Took me less than an hour to do everything.Unfortunately, one should do the motor mount lift in conjunction with this body lift. The MML is a royal PAIN and will likely prevent me from ever dealing with a body lift again. But don't get me wrong, this JKS item is great (even if the instructions do miss a beat).

Fit perfect and easy to install. Took about an hour to install. Getting the rusted body bolt off was the tough part. Use PB Blaster. Put it on body bolts the day before and again before taking them out and it will go quickerI have them in for a few months now. They don’t make any noise of any kind and feel to give a bit of a smoother ride. Not sure if that’s in my head but it does feel that way.Bottum Line: Buy It!