PoE TexasGAF-5v10w | IEEE 802.3af Splitter with 5 Volt 10 Watt Output - Power Over Ethernet for 5 Volt Non- Devices

Used these for raspberry pi digital media displays. They work great and allow us to restart through the switch they are connected to. Runs a raspi 4 or 5 without issue. Has the right angle adapter for a left or a right turn. Great idea.

Produkt macht, was es soll - lediglich war nur ein Usb-Adapter vorhanden 'rechts' statt der abgebildeten zwei (links und rechts). Die Zuleitung zum Raspberry macht daher eine unschöne Schleife.

I've successfuly powered a Raspberry Pi 3 B+ and a Zipatile with this splitter. I purchased the version with photos that shows both a right-angled and left-angled Micro USB lead included, however only one of them is. Fortunately it's the correct one for my needs otherwise I would have had no choice but to return it.

Fonctionne correctement.Fournit bien le 5V nécessaire pour alimenter un routeur LTE en microUSB (je n'ai pas testé le "jusqu'au" 2A). L'interface est également une interface 1Gb, contrairement aux multiples autres splitter que j'ai vu qui ne fournisse que du 100M (économie de bout de chandelle) ce qui est bien pour un RPi mais pas renforcement pour un routeur LTE débitant facilement plus de 100M.Grace à cela je peux enfin placer correctement le routeur dans un endroit ayant une bonne réception loin de toute prises.A noter un bon point positif pour le vendeur JJW Technology. J'ai reçu le splitter sans aucun convertisseurs en microUSB. Déçu j'ai contacté le vendeur qui m'a rapidement répondu et la semaine suivante j'ai reçu les 2 convertisseurs (coudes droit et gauche). Dommage qu'ils n'aient pas été inclus d'office mais au final ça s'est bien fini.

[WT-AF-5v10w 802.3af PoE Splitter With 5 Volts Output]Needed a direct power solution (no adapters, etc.) for an Axis camera that was not PoE.I did not want to use passive injection and have to worry about supplying different voltages at the source.This product was the perfect solution and the quality is obvious, as well.I'm no novice when it comes to electronics and/or networking (35 year EE/CompE) and it's amazing how many people don't know what they're buying and the sellers take advantage of that. MANY, if not most, of the "802.3af compliant" injectors I have seen are actually PASSIVE injectors, which, by definition, are NOT 802.3af compliant. It's also a good way for a neophyte to ruin their equipment since there is no standard. They also use the correct term "compatible" but never explain that is not the same as "compliant."In any event, this is a truly compliant device that negotiates Mode A/B PoE (Ver. 5) from the power sending device and then Buck converts it to 5V, 2000mA.This could never be done with a linear regulator with a passive 48V injection. Even with 12V passive injection, as much power would be dropped in the regulator as in the device and that just won't work.