Washer Rotor Hub Repl.# MBF618448 4413EA1002B 4413ER1001C 4413ER1002F 4413ER1003B

The item was delivered much faster than promised by Amazon. With the current pandemic, getting "non-essential" items delivered by Amazon is slow. I got mine from a 3rd party seller/shipper and it arrived(via USPS) and is installed and working (already ran a couple loads) 28 days before Amazon said it would arrive. This worked perfectly on my LG wm0642hw. The replacement process was simple, as long as I had a helper to keep the drum from spinning while I tightened the bolt. It seems to be similar quality to the original hub. At 20% of the price of the rotor part from LG, this was a wallet saver as well.

This product fit my LG Steam washer Model WN2487HWMA perfectly!Plus has a metal insert instead of the original plastic! Saved me a lot of money

Part # PBT-GF30 or MBF618448 absolutely DOES replace the center hub of the rotor assembly part # 4413ER1003B or 4413ER1003A. My LG WM2455HG is working beautifully now. Very easy to replace too! This was the first appliance I've attempted to diagnose and repair on my own. I am a 43 yr old single woman who is good at technical/mechanical things, can use most tools, and doesn't mind getting my hands dirty. So if I can do it, you can too! Points to note: be careful taking the assembly off of the machine- the magnets are super strong and you have to wiggle the large circular metal piece to get it off. You will think it's not going to separate but keep applying even force as you pull. It does separate quickly once the magnets are pulled apart, so be careful not to drop it or lose your balance when this happens.

I had this part swapped out and the machine running again in less than an hour. fits perfectly and far more cost-effective than spending money on a repair call.

Worked on my LG washer WM2233HW original parts (4413EA1002B & 4413ER1003A), but was 3/16 's shorter than original. Had to get at 1/2" M24 washer from HomeDepot (in the drawer on screw asile), in order to get correct offset from bucket. Once installed with some locktight to keep the screw from backing out, washer is running again.

Does not fit the 4413ER1003B as it comes because the width is more narrow but it can be modified to work adding washers to keep the drum from rubbing. I installed it as soon as I got it and still running for a week now with no problems.

Glad the center is metal, better than the original fiber spline. The only problem is it is about 3/16" thinner than the original, allowing the metal hub to drag. I had to place a 7/8 washer between the outer bearing and spacer for the proper clearance. So far working good. My model number was 4413ER1003B. I would have given 5 stars if the dimensions were the same.

As others have stated this part isn't quite as deep/tall as the OEM part and you will need spacer washers/bushings. The best fit I found readily on hand at the local hardware store is for 7/8" inner diameter and 1-3/8" outer diameter machine bushings. You will need 3 of them to make up the 5mm spacing gap between this part and the OEM part. If you don't have them, the bolt won't tighten properly and the magnets will rub.