OPT7Aura Single Row Expansion Pack - 2pc 12” RGB Multicolor LED Strips w/Splitters and Extension Wires for Interior, Wheel Well, Grille, Motorcycle, Golf Cart, Car, Boat Underglow Lights

I don't say this often neither do I endorse products alot, but opt7 simply put the competition to shame. When it comes to led automotive lighting. First off I have been a loyal customer to this company because for one anything I buy from opt7 is just as advertised. Great quality products built to last and they all come packaged well. Now personally I love their aura led exterior kit which is has rugged aluminum putter body to protect the led's. Plus with this kit you have over 18 colors to choose from and you can mix and match the preset colors to create a color of your own with the included remote! Also you can adjust the luminosity (light intensity) of the led and their strong enough the can be seen doing the day and look amazing at night. Everything you need to get up and going is included in the packaging for the aura led kit all the way down to brackets, screws and zip ties is. Along with three ways to hook them up for power in-line under the hood fusebox tap, cigarette lighter adapter or fuse box tap for inside your vehicle. Not to mention more than enough wire to reach anywhere along your vehicle with easy snap and go connectors and the ability to buy extra extensions or led if you need themThe led's have also multiple modes you can choose from strobe, fade and music sync which works great.

I added this pair of 24" LED strip to an already existing set of four 12" strip to the underside of the pickup truck bed rack. Great addition along the upper lengthwise beams, just the right fit. They stick great and were easy to wire with some y-splitters. Integrates nicely. My only disappointment is not with the lights, but with the Aura Controller app, which cannot have a default ON setting when powered up. You have to turn them on / off with the app.

JUST INSTALLED THESE ON MY NEW STINGER, SINCE THE FACTORY FOOTWELL AND MOOD LIGHTS WERE JUST TOO DIM. I PREFER THE BLUISH WHITE LIGHT SETTING. FIRST ZIP-TIED THE CONTROL UNIT ON THE FIREWALL, JUST BEHIND THE DRIVER FUSE BOX, USING THE DOOR LAMP FUSE AND ONE ADD-A-FUSE CONNECTOR. HOOKED UP AND STUCK ON THE DRIVER SIDE LIGHT RIGHT UNDER THE DASH, THEN FISHED THE PASSENGER FRONT AND REAR WIRING THROUGH THE SMALL GAP BEHIND THE A/C BLOWER, AND THEN ATTACHED THE FRONT PASSENGER LIGHTS JUST BELOW THE GLOVE BOX, USING THE STICKY SIDE ADHESIVE FOR THESE LIGHT STRIPS , THEN TUCKED THE WIRES GOING TO EACH OF THE BACK SEATS UNDER THE FACTORY FLOOR MATS, THEN PROTECTING THEM WITH 3/8 INCH FLEX CONDUIT LOOM WHEN ROUTING THE WIRE UNDER THE SEATS, THEN FINALLY ATTACHING THE REAR LIGHT STRIPS WITH THE STICKY ADHESIVE, AS WELL AS USING SEVERAL ZIP TIES, INSTALLING THEM JUST UNDER THE FRONT SEATS ON THE BACK LONG METAL BAR, WHICH IS LOCATED RIGHT UNDER THE TWO METAL CLIPS WHICH ATTACH TO AND HOLD THOSE ELASTIC SEAT BACK STRAPS TIGHT ONTO THE BOTTOM OF EACH SEAT. MAKE SURE TO MOVE THE SEATS AROUND AND UP AS HIGH AS POSSIBLE, TO GET A REALLY GOOD LOOK UNDERNEATH. USE A SMALL BRIGHT FLASHLIGHT AND A GOOD-SIZED HAND MIRROR. THEN STICK YOUR HEAD AND FINGERS UNDER THERE TO FIND EVERYTHING. JUST BE CAREFUL TO ALLOW ENOUGH LENGTH, THEN CAREFULLY ZIP-TIE THE PROTECTIVE LOOM UP AND OUT OF THE WAY TO ALLOW UNRESTRICTED SEAT TRAVEL BACK AND FORTH..THESE MUCH BRIGHTER LIGHTS NOW COME ON WHEN I LOCK AND UNLOCK THE DOORS, WHICH IS SO MUCH MORE HELPFUL FOR LOADING AND UNLOADING THE CAR, AND ALSO FOR EASILY CHECKING FOR ANY ITEMS LOST UNDER THE SEATS OR LEFT LYING ON THE FLOOR. THIS WAY I CAN NOW LEAVE THE MAIN LED OVERHEAD LIGHTS AND MOOD LIGHTS IN THE DOOR-OPEN POSITION, AND THEY WILL STILL COME ON AND GO OFF AS USUAL.. I CAN ALSO USE THE REMOTE NOW TO TURN ON OR OFF MY NEW LED FOOTWELL LIGHTS WHEN I START DRIVING, AND TO AVOID ANY DISTRACTION AT NIGHT. SUCH A WELL-MADE AND USEFUL PRODUCT.. I EVEN BOUGHT THE TWO EXTRA ADD-ON EXTENSION LIGHTS FOR THE HATCH OR TRUNK, WHEN I EVER DECIDE WHERE EXACTLY TO INSTALL THEM.

So easy to install a one armed one eyed monkey could do it. The adhesive tape is amazing I've seen cheap and this is top notch. Hooks up to your fuse box by plugging it into a key hot or like I did I made them battery hot because the car club does meets and shows and I like the option of keeping them on while parked at shows.The App is plug and play. Download it add power to the LED strips choose your color and I bought the expansion pack so I can light up my engine bay they come with everything needed from lights to splitters to extra wiring. Have to say if you're looking at these for your car you will not be disappointed! One of the better aftermarket parts for the money!!!!

Shipping was fast, as prime should be... product works nice. I took it upon myself to get longer shrink wraps so the connections were covered better, I suggest this for anyone who wants the system to last. It is a little time consuming to install, but like anything, you could cob it and have it done in no time. That's not my style... i installed on my mudding quad and it needs to be able to handle a little abuse. All in all, I give it a thumbs up for cool factor as well as some practical uses on the trail. I hope the product lasts as long As I think it will, as I very much like how it works

Is there a way to rate 10 stars? Lol AMAZING all the colors are so vibrant and bright. Truly have the entire rainbow in this one kit. The key fob abs master remotes are sleek and easy to use with good range. Mountable inline switch comes in handy if you need to go incognito for a bit 😉 super easy to mount. When removing the old LED's from the previous owner I thought this would be a pain in the ass. But you don't need to actually do wiring. Just plug them in, and stick them to your frame, hardest part is hiding the wires. Everyone compliments me on them and ask the brand, "OPT7 BIOTCH" is what I tell them.If you want to light up the night, this is your kit!

Perfect

I found the quality of these lights much better than others I looked at. Clean your surface well and warm the 3M strip with a hairdryer, adhesion is very good.

Really really Easy to install !!!

These won’t match their own kitColour is way off