Screen Protector (Set of 2) for HP Spectre X360 2in1 13.3" Touchscreen Laptop Anti Glare Anti Scratch Filter Radiation

fits hp spectre x360 perfectly.it is a matte screen protector (may have not read thoroughly or wasnt informed, highly unexpected), the the screen is still very visible and bright.instructions very easy and simple.to avoid tiny bubbles, i lifted the screen protector, after completed application, and with a long piece of double sided tape, pressed any particles on the screen/protector onto the tape. my screen is practically bubble free, except for a few edges, which cant be helped.good quality, would buy again if necessary.

Absolutely clean table (glass table at that). Check.Perfectly cleaned, spotless laptop screen. Check.Canned air on perfectly clean laptop screen, per instructions, just to be sure. Check.Carefully peel plastic protector sheet number 1 from screen protector. Check.OK, have you ever heard of an "ignosecond"? It's that tiny slice of time when something bad happens too quickly for you to do anything about it. Like when you close your locked car door and notice through the sliver-thin closing gap that your keys are still in the ignition. Well, in the ignosecond after the protective sheet came loose from the screen protector, the static electricity one might expect from dropping a long-haired cat into a box filled with packing peanuts and latex balloons and then watching it bolt out of there in a flash - peanuts and balloons permanently bound to it by ungodly amounts of charge - was instantaneously generated. This caused the screen protector to draw every piece of dust floating anywhere in my house to it at superluminal speeds. At the same time, the screen protector wrapped itself around my arm, much like the aforementioned cat would when trying to bathe away those peanuts and balloons. It now dawned on me why there are two of those screen protectors in the package.My attempt to apply the second one went MUCH better. I repeated all the previous cleaning steps. I then peeled the protective layer off veeeery slowly, making sure to keep it as still as possible. I looked down at my screen to make sure no dust fell on it in that short time. It was still clean. I looked at the sticky underneath of the screen protector and watched - yes actually watched - dust quickly moving through the air and affixing itself. I quickly laid out the protector on the screen, naively thinking the little bits of dust wouldn't be THAT noticeable when I was done. And when I WAS done, I found out how wrong I was. You wouldn't think a couple dozen little bits of dust could make much difference in a person's life, but you would be oh so incorrect. Off the second screen protector came and into the trash they both went.Don't get me wrong - the materials and workmanship of the screen protector seemed quite good. And I'm sure some person out there was successful in applying it perfectly. Well they should get a prize. They have inhuman skills and apparently live in a NASA clean room. Obviously I don't. I DO live in a VERY clean house. It just wasn't enough. If you have one of those Intel chip factory bunny suits and a HEPA-filtered clean room, you should be good to go. Otherwise, I suggest finding other ways to deal with the HP x360's mirror-like screen.

Bought my Spectre this past weekend and purchased this to protect the screen. Applying any screen protector sucks whether it's for a phone or a laptop. I had absolutely no major issues applying this screen protector. I went very, very slow, making sure to eliminate any bubbles along the way. I messed up the alignment the first go around, so I had to peel some of the screen protector back to start over. I honestly managed to get he screen protector on with absolutely no bubbles or dust particles. The little triangular piece wasn't the best. I was scratching the top of the screen protector quite a bit trying to get the bubbles out, but once you peel off the top layer of the screen protector none of those scratches went through, so I was happy about that. The screen protector is slightly smaller than the entire screen. It falls just short of covering the ALL of the black that outlines the visible portion of the screen. I like this better otherwise it would be a complete pain trying to align it. I haven't tested the quality of the protection, but am giving this five stars based on ease of application and I can't even tell that I have the screen protector on, both when the computer screen is on and when it is off. Very happy.

This product came quickly and was pretty much what I expected. Although it completely covers the main part of the screen, the corners are not perfect, but as close as I would expect for the price. Does a great job protecting 99% of the screen and reducing glare. The install was a real pain though. The little plastic piece that they give you to push out bubbles started to loose the printed logo and pieces of it got everywhere. It ruined the first screen protector, luckily this is a 2 pack.I would recommend that you add a VERY SMALL mist of water to your screen before applying it, as it will help push out dust and make bubbles easier to move. Once the water dries it will leave this with no bubbles or dust stuck behind. Also, use a credit card or something because the tool they give you just causes more problems.

The seller has another screen protector for the HP Spectre x360 (PcProfessional Screen Protector (Set of 2) for HP Spectre X360 2in1 13.3" Touchscreen Laptop High Clarity Anti Scratch filter radiation)that--according to reviews--did not provide the proper space for the Mic and Camera holes. That being said, just by looking at the product photograph it becomes evident that the seller listened to the reviews; this screen protector comes with a long, oval-shaped window for the aforementioned holes.Now, for my personal experience: I am absolutely terrible at applying screen protectors but managed to do this one with almost no sweat, so anyone saying it was too hard must be worse than I am. The 2 things I didn't like about this product were a) the tiny bubbles at the top of the screen (both in the corners and above the peephole) that would simply NOT go away no matter the effort and b) it doesn't fit the screen perfectly so there is a sliver of screen showing around the border. Even with those super minimal issues, however, I am a very happy camper. It must also be noted that this screen protector has an absolutely lovely matte finish. Should I ever run through both of mine, I would definitely purchase this product again.