Description 1. Display current sensor data, including: Engine RPM, Calculated Load Value, Coolant Temperature, Fuel System Status, Vehicle Speed, Short Term Fuel Trim, Long Term Fuel Trim 2. Display current sensor data, including: Intake Manifold Pressure, Timing Advance, Intake Air Temperature, Air Flow Rate, Absolute Throttle Position, Oxygen sensor voltages/associated short term fuel trims, Fuel System status, Fuel Pressure etc. Clear trouble codes and turn off the MIL (\"Check Engine\" light) Operation system supports: Android Smartphones, Symbian, Microsoft (mobile phone, tablet), most computer system(except Apple system), and all these device must have Bluetooth function. Vehicle Coverage: Works on all OBD2 Vehicles. OBD-II Protocols: SAE J1850 PWMSAE J1850 VPW (10.4 Kbaud) ISO 9141-2 (5 baud init, 10.4 Kbaud) ISO14230-4 KWP (5 baud init, 10.4 Kbaud) ISO14230-4 KWP (fast init, 10.4 Kbaud) ISO15765-4 CAN (11bit ID, 500 Kbaud) ISO15765-4 CAN (29bit ID, 500 Kbaud) ISO15765-4 CAN (11bit ID, 250 Kbaud) ISO15765-4 CAN (29bit ID, 250 Kbaud) SAE J1850 PWM SAE J1850 VPW ISO 9141-2 ISO14230-4 KWP ISO14230-4 KWP ISO15765-4 CAN ISO15765-4 CAN ISO15765-4 CAN ISO15765-4 CAN Specifications: Processor: ELM327 V2.1 Dimensions: about 4.7 * 2.5 * 3.1cm Net weight:31g Package weight:41g Color:blue Package includes: 1 x ELM327 Bluetooth OBD2 Scanner Tool
D**T
This is a V1.5 ELM 327 chip NOT a V2.1.
The product description is a lie. It contains an older version of the ELM 327 chip, and so some (uncommon) ODB2 protocols are not supported.That said, the 1.5 version isn't bad, I'm just upset that they lied. This does work reasonably well for me in a '05 Mini Cooper.
D**3
The bluetooth connection with an android smartphone worked fine, but the device failed to establish communication with ...
Item was defective upon arrival. The bluetooth connection with an android smartphone worked fine, but the device failed to establish communication with the ECU when tried on 3 separate vehicles. Do yourself a favor and spend the money on a product with better quality control.
H**E
Take Care With The Included Disc
As installed in a 2005 Dodge Ram and paired with a Joying head unit running Torque Pro, it simply doesn't work for the presumed intent. Oh, it paired and was recognized, but it will not interface with the ECU. This seems to be a known issue with these translucent blue ELM 327 units. Interestingly, Microsoft Security Essentials found something on the included disc; no need to really say what, but suffice to be cautious. There is not telling what else is on there. In fairness, I noted that other like models have the same disc with the wall-eyed panda label.Will this work for other applications/vehicles? Perhaps, but this one certainly didn't support "all OBD 2 protocols" in my case. It's not worth seeking a refund on a low-cost purchase.
S**D
Has its good and bad points
Over the years I have purchased many of these units from various suppliers and I can assure you that they are not all equal, even the more expensive ones. Some have worked, Some are just dead on arrival. Do not use the disks that come with these.A note that may be of some help, there are a lot of variables on how this and other units work with your vehicle. Such as type of Vehicle, type of phone or tablet, various kinds of apps to use with this product. Just make sure that you spend the time to set up your Vehicle in your app and that the phone will bring up the unit in bluetooth.Keep in mind also, that if using a cell phone or tablet that you have it on a car charger as these units drain the phone/tablet battery very quickly mainly because of many functions that are activated while in use such as bluetooth, gps, some other functions based on the Phone/ tablet in use.Trial and error as some Vehicles do not (or will not) allow some of the functions that can be obtained by a GOOD reader.
P**G
sucks
it doesnt work. dont buy it. buy one thats more money.
G**Y
DO NOT BUY!!! Chinese knockoff
Do not buy! this is a knockoff chinese part that does not do anything! There are good ELM 327 products out there, but this is just a cheap piece of plastic with blinking lights that does not perform as advertised.Tried with numerous vehicles and numerous devices.Don't go the cheap route with these or you will just waste your time and money as well as increase stress levels when you realize you got scammed.There are plenty of youtube vids comparing these knockoffs to the real ones.My advice is to buy the Kiwi 2 Bluetooth OBD2 adapter. its like 60 bucks on sale and works perfectly
S**X
Probably will not work for older vehicles; definitely did not work with vehicles using OBD-II J-series protocols (Chevrolet).
They need to list which protocols this adapter supports. It works with Torque Pro almost automatically with a Sony Experia phone and Nexus 7 tablet and supports fast read mode for both devices on a 2008 BMW 3 series (ISO/CAN), but doesnt work at all on a 2006 Chevrolet truck (J-series protocol). IIRC from other people, they cut corners on this one and don't support all protocols (just seemingly support newer protocols). Buyer beware. I bought another one identical to this except for slight price and packaging, and the results were the same.
L**2
V2.1 Super MINI ELM327
Did what it was suppose to do, got my codes MAP censer, l bought used OEM and tested Toshiba MAPl same as what was in the car and it fixed the problem, then cleared the code, now my wife is happy, no dash light and the car passed inspection and runs great.So what could of been 300.00 plus fix at the repair shop ended up costing me under 18.00 dollars, Some Ebay time and YouTube time problem fixed. remember this will only give you the code from then on research.ELM327 Bluetooth around 5.00 dollarsToshiba used MAP was 11.99 dollarsTolal 16.99 dollars
Trustpilot
1 week ago
1 month ago
