WALI Triple Monitor Stand, Free Standing for 13-27 inch Screens,up to 22lbs

I have no complaints with this stand. It is not as nice as the Inland brand sold at MicroCenter, but it does its job. It beats the price of the MicroCenter one, thats for sure. It comes with all the hardware you might need, even long screws and bushings if you have a display that needs them. Assembly was quick. It comes mostly assembled anyway. You have to put the bottom on the post then attach the assembled arms to the post. Setting up can be a challenge but with help, its easy. After mounting the bracket on the back of the displays, you just slide them into the receiver on the arms. Once mounted, adjusting the position is simple, but can take a while as there are several joints which can be positioned to angle the displays as you like. The cord clips do an OK job of cord management, but the clips are not as good as the Inland ones. They do the job, but not as durable. I broke the one that goes on the post, but I tried getting it to hold a wad of wire. My fault. I recommend this stand.

Extremely sturdy. Easy to put together, Very easy to move around, Great Price

WALI Dual Monitor Stand: A Solid, Space-Saving Base Camp I needed to reclaim some real estate on my crowded desk, and this WALI freestanding mount did the trick. It's a straightforward, no-frills solution that holds my two 24-inch monitors securely and opens up a ton of space underneath. Assembly is intuitive, though having a second pair of hands is helpful when you're attaching the monitors to avoid any tipping. The all-metal construction feels sturdy and reliable. The adjustments are basic but effective—you can raise or lower both monitors together on the central pole and tilt or swivel them individually to get the angles just right. The included cable management clips are a nice touch for keeping things tidy. The key thing to understand with any freestanding mount is balance. If you extend the arms all the way out toward you, the whole unit can get top-heavy and want to tip forward. I keep my monitors positioned more centered over the heavy base, and it's perfectly stable. It's not meant for dramatic, extended poses. For the price, it's fantastic value. It doesn't have the infinite, fluid adjustability of high-end gas-spring arms, but it doesn't need to. It lifts your monitors, frees up your desk, and does its job without any fuss. Bottom Line: An excellent, budget-friendly way to lift two monitors and dramatically increase your usable desk space. Just be mindful of the center of gravity and don't expect ultra-flexible, independent positioning.

I mounted 2 27 inch monitors on this and it is very sturdy and works well. No complaints here.

Works well clean and useful

This ended up being a great purchase so far. It comes with both the freestanding option as well as a mounting option and you don't need to drill too big of a hole if you decide to mount it into the desk. So far it has shown to be very sturdy. All of the brackets are nice and secure. It was relatively easy to put together I'd say. Just make sure you're paying attention to the directions of how things are placed is my biggest advice. Very good at hiding the wires and it comes with nice brackets to help with that. Very affordable and I love how my office looks now.

I had two monitors sitting on their stock stands eating up half my desk real estate. Installing this mount was one of those purchases that immediately made me wonder why I waited so long. The setup is straightforward. The V-base is stable and heavy enough to hold things steady without grommet mounting, though a grommet hole option is included if you prefer it. Each arm supports tilt, swivel, rotation (landscape to portrait), and full height adjustment on the center pole, giving you a lot of flexibility to dial in exactly the ergonomic position you want. Cable management clips on the arms and along the pole keep things tidy. It fits monitors up to 27 inches and handles up to 22 lbs per arm, which covers the vast majority of consumer displays. The VESA compatibility covers both 75x75mm and 100x100mm mounting patterns, so check your monitor's back plate before ordering. The arms hold position well once adjusted, and the overall build quality is noticeably solid for the price. At over 22,000 ratings and a 4.3 average, the community verdict is pretty clear on this one. Highly recommended.

I have two 21" monitors (heavier Lenovo and much lighter Acer) so I wanted this dual-monitor stand to consolidate their footprints to regain more space on my desktop. ASSEMBLY: After the first 3 steps, you would definitely need a helper to slide in the monitor and hold it while you screw on the nut and continue holding it (or the stand will topple over) while you attach the second monitor. Since my two installed monitors are of different weights, the stand initially toppled over. It was only when I adjust the arms to a "W" shape that the stand was able to support both different weight monitors without toppling over. (For about 10-15 min. until we reached this zen configuration, I was worried that we would need to disassemble the entire stand to return it.) You may not have this issue if you have equal weight twin monitors. Note, some screw holes on the stand did not allow for easy screwing. I needed to use more force to get the screws to screw in all the way. EASE OF USE: This budget stand is definitely rough around the edges. It only allows you to tilt the monitors without a tool. If you want to adjust the height, you would need a helper to hold both monitors while you loosen the bolt with the provided wrench to adjust the height and finally tighten the bolt. OVERALL: Once fully assembled and adjusted to my liking, this budget stand can hold 2 unequally weighted monitors and it is quite sturdy. For successful assembly, you must have a helper and be prepared for the initial hassles that I outlined.

easy to use.

El producto supero mis expectativas en cuanto a calidad por el precio. Fue bastante facil de instalar y en cuanto a funcionalidad y acabado del material no le tiene nada que envidiar a otras bases que vienen con algunos monitores mas caros de marcas como Dell o LG ya que cumple y no se siente barato, la base y el brazo son de metal rigido y el color negro tiene un buen brillo elegante. Y al ser de base se me hace mas facil de transportar el monitor asi, no lo tienes que anclar o atornillar a la mesa y asi no dañas tu escritorio.

高さ調整ができないVESA対応の安いモニターを買ったので、このスタンドを付けました。 各パーツが厚みのある金属でできていて、とてもしっかりしています。 パーツが入った袋にアルファベットが打ってあり、説明書と照らし合わせながら簡単に組み立てることができます。 くみ上げた後にモニターの高さを微調整できたりと、工夫が凝らされています。 よくできた製品だと思います。 唯一残念だったのは、ポール下のネジ穴の精度が低かったことでしょうか。

So ganz kann ich manche Bewertungen nicht verstehen. Der Aufbau ist sehr einfach und selbsterklärend, das Produkt wirkt robust, allerdings hat der Ständer überall Macken im Lack oder die Beschichtung ist einfach nur billig. Für den Preis dann doch weitersuchen

ベース部分(ブーメラン型)の寸法：W_33cm,D_27cm 躯体はしっかりしている。 ベース部分が比較的コンパクトなので、側面の2台を自分方向に極端に向けて重心を手前にしてしまうと、不安定とは言わないが倒れやすくなるかも。 3台の画面を横一列に近く置くのが基本になっていそう。