Silvia Group Head Gasket - Genuine OEM Part by Rancilio

I purchased a gasket and installed it in October 2017. That broken up gasket is that same gasket in February 2021. Rock solid, leaking, just horrible.I installed this on a Rancilio Sylvia.It worked great and lasted very long, but you really should replace it once per year.I bought another rubber gasket as a spare, but am trying out the silicon gasket this go. So far, the green silicon gasket is great. Easy to install and quite soft.Calendar alarm set to change in a year this time... 4 years is 3 years too much...

This worked great on my 20+ year old Silvia (Early Generation Silvia v1). The old gasket was a bit hard to remove, but an ice pick worked great to get it started. It came out in multiple pieces. After a good cleaning, the new one slipped right on. The Portafilter helped seat it more firmly. I can now turn the Portafilter further than before, and more importantly, no leaks.

This is a genuine OEM Rancilio Portafilter head gasket and will solve the problem of water leaking around the portafilter during a pull (NOT caused by a dirty brew head!)The gasket on my 2012 Silvia had hardened over time because of the repeated heating and cooling cycles and it was obvious it had served its time.While I had the machine down for the installation of the gasket, I gave the head a good cleaning and now Silvia is once again making fine shots.

Before purchasing this purported “Genuine OEM PART, Rancilio Silvia Group Head Gasket” I checked with the supplier from whom I purchased my Rancilio Silvia over 10 years ago as well as reading many reviews online. I removed the old gasket, thoroughly cleaned the groove which holds the gasket. The replacement gasket was VERY difficult to insert in the groove, it seems a bit too large. Finally after 15 min of pushing as hard as possible to seat the gasket in, I put the filter back on and turned the machine right side up. It took at least 10 tries of pushing very hard before finally being able to insert the portofilter up AND is still very difficult to turn it to the right to seal it before dispensing the espresso. Have used it 10 times now and the heat and repeated turning of the portofilter has not improved the difficulty in using the portofilter with the new gasket. Yes, changing the gasket stopped water dripping from the portofilter - but it is a pain now struggling just to turn the portofilter. NOTE: the old gasket looked like it had a groove on the side facing down, contacting the portofilter. The new gasket is flat on both sides, no groove. But the suppliers all said the replacement gasket was for all Rancilio Silvia machines regardless of age or model.Upgrading my review to 4 stars. After using the new gasket for 3-4 weeks it’s getting a little easier to insert and turn the portofilter. Most importantly, no more water drips and getting great crema again.

I have a 20+ year old Rancilio Silvia. Previously I bought a silicone gasket that claims to fit but doesn’t and started to leak. This one fixed the problem.

Used a small screw driver to get old out. While doing this I put the new seal in warm water. Helps makes it easier to install. Went in without a hitch.

I bought my previous gasket from this listing a few months ago, and I just removed it today after only 3 months of use. It was TA‑coded, very shiny, and had already become extremely stiff. When I pulled it, it broke apart in brittle chunks — exactly how an over‑aged hard gasket behaves, not a soft Silvia home gasket.To confirm, I ordered the soft/home version from Stefano’s (ETF‑coded), and the difference was immediate. Smooth ramp to seal, no stiction, and a perfect triple shot. That’s how the correct soft Silvia gasket should feel.So the one I bought here was either from an older, stiffer batch or simply not the soft/home version despite being listed as such. Posting this so other Silvia owners know what to look for — and that it’s worth buying from a vendor who consistently moves fresh stock.

I didn't realize how badly deteriorated my old gasket was until I put this new one in. My Rancilio seems like new, even though it's 15 years old! Easy to put the new one in, but difficult to get the old one out if you've left it for as long as I did.

Den läcker. Fått tips köpa en annan packning som är 8.5mm i stället för 8mm.

Simple to replace

Macht was es soll und das für einen guten Preis.

Easy replacement. OEM spec so fit perfectly

This is the first time I changed the gasket after 6 years of use. Upgrading my basket to a VST started to show some leaks. I also had the bad habit to keep the portafilter engaged with the previous shot in the machine… So the old one was hard an no longer soft enough to seal the basket. I ordered 2 parts so I will have a spare one for when required.