Wellfit Watch Pins, 1.8mm Thickness Heavy Duty Spring Bar, 4 Pack Stainless Steel Watch Band Pins, 21mm

These Spring Bars are high quality, and the 20 mm by 1.8 mm is the correct size for Invicta Pro Diver watches (including the 8926OB model). The more common 20 mm by 1.5 mm thickness Spring Bars are too thin for these watches. I noticed one person wrote a review with photos and complained that the thickness is not really 1.8 mm and he provided a photo of the Spring Bar in his Micrometer showing it to be 1.78 mm thick. Really? Being undersized by 0.02 mm (less than 1/4 the thickness of a human hair) bothers him? Spring Bars and other similar items are never exactly the thickness of the specifications. Due to normal variation the dimensions can vary a tiny bit, so they are always made slightly smaller than spec. This can be seen in his other photograph showing his original 1.5 mm Spring Bar to be really 1.45 mm in thickness. Better slightly small than slightly too large! Slightly small will work. Slightly large won't fit. I have found that these Wellfit Watch Pins will last five to seven years of daily wear by a physically active person. And that's not to the point of failure, that's to the point where they start to bow a bit causing the band to not snug right up to the watch case on a Submariner type watch.

i've bought a few 1.8mm spring bars for my IWC. bought some from a very well known brand (artem) and they actually kept popping out (pin too large) which in one case caused my watch to fall on concrete. i think these are very decent. thick - they fit well in the holes of my IWC alligator leather strap, with little room for play. they are strong and i like them.

The listing says heavy duty but I don't think they're much more heavy duty than some of the spring bars I've seen. Certainly they're not as heavy as the original equipment that comes with a dive watch those big thick spring bars but these seem well made and I use them I would purchase again if needed them

These spring bars are of excellent quality and the perfect thickness for my Strapsco rubber strap. 21mm and using them on the Longines Hydroconquest.

I thought these spring bars would be a gimmick. I tried pulling one apart. Trying to break it. By bending, twisting, trying to remove the inner spring with pliers. Not easy to break. I might look for these in a 1.8mm. However, the 1.6mm was good size thickness to use in substitution. Much springier than the cheapo ones that come in bulk.

Exactly as described. Work great

These are easily the best spring bars that I have purchased off Amazon. Bought the 22mm bars for my Timex Deepwater and they fit perfectly, and feel sturdy.

I ordered the 22mm bars for a Garmin Instinct 3 watch. Unfortunately, these bars were too short, likely the 21mm size. However, all four pieces were in tact and the springs worked well. Would have been a good product had they actually fit.

Strong quality ,good price

Se ajusta a la descripción

Not very good quality, and not as described.

Bueno

Great product as described.