Musiclily Pro R15J-13 Vintage 6 inline Split Shaft Guitar Tuners Set Nickel

These tuners look and work just like the Vintage Fender originals. Tuning is very solid. Function as locking tuners with the split shaft. I use these a lot on my conversions and rebuilds. Very happy with the product

Great tuners! I love the split shaft classics.

Bought a few sets of these for a few projects and all were fine except one single tuner slips when tightening, have had them for around a month and that issue happened when I first installed and tried to tune the guitar. I use a flathead to assist the gears when the tuner slips and it holds tune after that but still annoying to deal with when restringing, otherwise they function pretty well besides the one problem tuner.

These tuners work very well, as long as the spacing of your tuner holes is correct. I have paired them with https://a.co/d/cpoMQb7 so they fit in standard modern 10mm tuner holes. I've had to routinely ream the holes to proper size, then use these tuners with the Kaish bushings and have had no problems.

I've used Musiclilly before, especially for pickguards... I really like "vintage style" split shaft tuners, but Musiclilly's cheaper version didn't have the best reviews... Then I saw they were releasing these "Pro" split shafts... I took a chance and pre-ordered a set... When they came in, they were packed well, exactly as advertised, and they felt sturdy and substantial... I advise using a ruler or similar straight-edge to get them on straight... I got these for an '89 Squier II Stratocaster and they ALMOST hang over the headstock, so, they BARELY fit, but they do... After I got them on, they're smooth, the ratio seems to be on, and they do hold tune quite well... Especially for under $20... I would definitely recommend these if you have a cheaper project that needs some vintage style... Or, if you're like me and just love the simplicity, and the faster restring time split shafts afford you...

The price and quality are over the top.I did have to use a step drill to open holes a tad on the headstock but, overall the install went well.Holds tuning well, looks very vintage, no longer getting pinched with end of strings, awesome choice of tuners.I was so satisfied with the tuners I purchased a second set for another guitar.Thank U Amazon and Musiclily.

Worked great for my stratocaster build! Note I put these on an authentic CBS style fender neck/headstock

Good tuners at a good price I would not hesitate purchasing them again

Measurements for fender or fender licensed necks are a bit off which means you need to do a bit of work to make them fit.Tuning stability is so so

They fit my MIM Strat neck perfectly. Actually, bushings were 0.1-0.2mm too small, so I applied a bit of wood glue around them, let it dry for several hours and they fit snug (if you don't let glue dry then bushings will stuck to the holes). All tuners aligned with existing screw holes perfectly. Screws themselves are a bit on small-ish side, but can't complain for the price. Worst case you add a bit of wood glue in each hole, let it dry and then the thin screws fit like a glove

Buena calidad de materiales, facil de instalar

Ich kann keinen Unterschied zu den Originalen feststellen. Laufen seidenweich und halten die Stimmung. Mehr braucht es nicht.

Très bonnes mécaniques vintage, tiennent bien l'accord, il y a juste les vis qui sont un peu juste., sinon je recommande.