MaxWorks 80854 Furniture Movers Dolly With Wheels - 200 lb. Capacity

This worked perfectly for me. Needed to move a heavy box to another room. Going to leave the box on the dolly. Comes unassembled but easy to put together. Definitely recommended. Rolled easily with the weight of the box.

EXCELLANT DOLLY - Very simple to put together, just place wheels into solid, flat base. I've had dollies before for various duties in my home. I am now probably going to slowly replace the ones I have with this one due to the sheer dependable nature of this dolly. So much stronger and as the drawers gather more items, as they will do, the dolly needs to be able to accept the weight and still be easy to move around. This particular dolly offers a sturdy grip for hand maneuvering, or you can place a handle of your choice to pull it. I like flexibility.

I like the size, weight and ease of use. It works like it's supposed to and durable. I have six of these and will be ordering a couple more. There are some small challenges putting them together otherwise I would give five stars. No worries though. You will need a 10 mm wrench or socket ( which is what I used ). Insert bolt through the top to the bottom. There are cut outs for the hex head to fit into inside the hole that will hold that end for you. You may have to wriggle the threaded end around a little for it to fall or push into place. I used my finger to assist in pushing it into that position. Place caster wheel over the threaded end of the bolt on bottom. Spin nut onto threaded end with flat side towards dolly. The nuts are nylon self locking so the will tighten up and need to be wrenched on to completely secure wheel to the bottom of the dolly. Make sure to get all four bolts and nuts started before fully tightening to ensure easier fitting of bolts through all holes. I was actually putting all four through before placing the caster wheel on and holding them in place with my fingers inserted into the four holes and then turning the nut onto each threaded end. It doesn't take to long to assemble. They should have included some sort of tool to help with tightening I agree. Just have a little patience and it'll come together.

The MaxWorks 80854 Furniture Movers Dolly has been one of those simple tools that ends up getting used far more often than expected. I use it in my workshop with no trouble at all. The wheels roll surprisingly smoothly across both hardwood and concrete, and the platform feels sturdy and balanced while moving awkward loads. For a 200 lb. capacity dolly, it feels dependable and well-built without being bulky or hard to store. I also appreciate how lightweight it is because carrying it from room to room or loading it into the car is easy. The only draw back is that only 2 of the wheels swivel. But, I work around that easily enough, Overall, this is a practical, affordable tool that performs exactly as intended. If you move heavy items even occasionally, this dolly is absolutely worth having around.

Love! Perfect & lightweight to move my large flower pots around the yard. Tied a nylon rope to handle and easily pulls around yard. Also use to move my sunflower seeds and deer corn. Very versatile. Great value for the money. I’m 70 and a female so the easiness of assembling with the directions was a plus

So I ordered this small 4-wheel cart to help support and move our battery backup (about 63 lbs.). The molding is simple and the wheels are less than perfect. I recently caught our hardwood floors at a angle with the sun shining through our window. Well, everywhere I had moved this cart to and from our battery inverter to connect there are nice lines of indentations in our hardwood floors - UGH!!!!! I could have screamed! You see, while the cart functions to support and move our battery, the "mold lines" on the wheels which are a thin 1/16th of an inch wide have dug into our hardwood floors. Yes, while the lines can only been seen while the sun shines across the floor (shine), you can see them loud and clear. Crappy cheap wheels molded poorly and the mold lines not filed down. I never thought to even consider it would do this. Wherever I rolled this cart in the house as a trial, I have these gouges in our hardwood floors. So, I used my rotary sander to even out the mold lines (best I could as the wheels are not that good quality when it comes to molding). I brushed the dust off the plastic wheels and wrapped black electrical tape about 6 times around outer edge of the wheels. Cart rolls much easier and so far, not more digging ruts in our hardwood floor. I'm so PISSED!!! Be careful out there when ordering this cart and if you have wood floors - it may leave a mark. So much for quality control. Hey manufacturer, do better on your products! I put some photographs to demonstrate the gouges we now have in several rooms due to the molding lines of the wheels. UPDATE: After 2 months loading it with 125 lbs. of weight, the unit is bending in the center and the wheel are kicking outward. Hard to wheel it as I need in the room. Time to scrap this as it's really poorly built, in my opinion. UGH!!!!

The product is fantastic, but brace yourself for a significant amount of frustration when installing the wheels. Each wheel requires four screws and nuts, and they’re quite challenging to attach, especially since the provided tool for screwing them was slightly larger than the nuts. Additionally, the wheels are quite close to the nuts, making them hard and awkward to attach. Be sure to have a hammer, as once I managed to secure two screws on each wheel, the holes didn’t align (on any of the wheels), making it incredibly difficult to attach the remaining screws. With the hammer, I was able to attach one more screw on each wheel, but not the fourth on any of them. The alignment was simply off. Despite the frustration, I absolutely loved the finished product, albeit without the four screws. As I mentioned, just be prepared for the challenges.

Good sturdy product. I'm using it for moving large plants outside to water them. Casters take a bit of time to put on, so if you have a power screwdriver with the right socket, assembly goes faster. I used some left-over nylon Christmas tree rope to attach to the front and its spot on. Comes with 2 swivel casters and two stationary ones. Put the swivels on the front and "Bob's your uncle".

I like it very much and it should be good to Move my bass amp

Molto comodo e stabile soprattutto per il PC fisso ma può servire per altri 1000 usi. Consigliatissimo..

Es igual a la foto,fácil de montar las ruedas.

Great item fits my Qsc sub perfectly Only thing I wish the 4 wheels swivelled

Does the job, good for the price