Tilting TV Mounts for Most 26-60 Inch LED, LCD TVs up to VESA 400 x 400mm and 88 LBS Loading Capacity, TV Wall Mount with Unique Strap Design for Easily Lock and Release MD2268-MK

Great wall mount for the price. We had an old 20" tube style TV that would not die, and it had been sitting on my wife's dresser in our bedroom. I know, we are behind the times a bit. :) So, we purchased a new 43" LED TV during Black Friday. The wife now wanted the TV off of her dresser so she could reclaim some of her dresser space back. I did my research on what TV wall mounts to get. The consensus out there said Cheetah mounts were the best. I came across this one and noticed that it was about $10 cheaper than the lowest Cheetah Tilt wall mount. Reviews for this one was good. Being the cheapskate that I am, I went with this one. :) The mount came in a box. It consists of 3 main pieces (the wall mount bracket and 2 arms). It came with plenty of screws for the bracket and for your TV. The arms were already assembled. I laid the 3 main components on our bed to see how it all worked out. The top "hook" on each of the arm brackets hook onto the top part of the wall mount bracket which has like a lip for the hooks to hook on to. The bottom of each arm brackets also have a retractable hook. By pulling on the strap, you can move the hook down so you can lock the bottom part of the brackets on to the bottom part of the mount. The wall mount went up easily after finding the studs on the wall. I put the arm brackets on the back of our new TV. From there on, my wife and I put the TV on the wall mount. The top hooks went on the top part of the wall mount. We pulled the straps on the arms, made sure the bottom of the arm bracket was resting against the bottom of the lip of the wall mount, and released the straps so the hooks can lock into the bottom of the wall mount. Voila! New TV mounted on the wall. You can even slide the TV from left to right if you need to "center" the TV to the wall. I used the included leveler and it was leveled perfectly. I didn't have any issues like some of the other reviewers said. I doubled check with my own and it came out to be perfect also. Because of the height of our TV, we use the Tilt option. Probably didn't need to tilt it but my wife said she could see a slight difference in the viewing when it was tilted. Word of advice. Before you mount the wall mount bracket, make sure you have it to the spot that you want to put it in. Once those screws go into the wall, you don't want to move them. I suggest you cut out a card board of the same size of your TV and put it to where you think you want it to be. For us, my 13 year old son and I held the TV up to the spot that we thought we wanted it to be. The TV was on and my wife then laid on the our bed letting us know if the height was acceptable. Overall, a good purchase for the price. Metal was thick. Quality was nice. Installation was easy. I have seen other wall mounts with the same feature as this one for a lot more than. I'm sure they work just as well as this one. But why pay more? I would easily recommend this mount to anyone who is thinking about buying a more expensive model.

Super easy to install and results in an extremely sturdy TV mount. My use case was as easy as it could be with 16" studs but it still would have been pretty easy to get this installed for irregular spacing...they even include instructions with several different options. The TV feels extremely safe and secure and yet it's still super easy to pull the TV down off the wall as well when necessary. The 8 degree downward tilt is perfect as well. I've mounted a TV for a home gym so a slight downward tilt is perfect to accommodate viewing from the floor. I mocked the whole thing up with the provided template and a piece of poster board so I had it exactly level from the start but the design of the mounting frame allows for a fair amount of micro adjustment once it's on the wall. The only piece of advice I could offer would be that you could probably use a slightly larger drill bit for your pilot hole. I think the advised 4 mm may have been a bit smaller than necessary. I honestly can't imagine a better mounting system could possibly exist. This was affordable, sturdy, easy to install, and provides versatile downward tilting. Can't say enough great things. Truly the mounting dream!

Good price and super easy to put together, with lots of customization options to fit almost any relatively new TV. Would buy another!

The price was right for what I wanted, and I'll buy another in the future. I finally installed this Mounting Dream MD2868-LK tilting TV mount yesterday to hold a 40" LED TV. I mounted the TV brackets on the TV and everything went well until I tried the last M6x12mm screw. The screw had something in the Philips slot and I couldn't get a grip on it with a screwdriver. I attempted to join the two Wall plates according to the supplied instructions. It calls for four M5x6mm bolts on page 4 of the Mounting Dream MD2868-LK Installation Instruction. The M5x6mm bolts were not in the parts package, but had M4x6mm bolts instead in the location designated in the Installation Instruction. Same with the washers. After a trip to Home Depot, I bought four M5x6mm bolts, four M5 washers, and one M6x12mm bolt. I was able to properly attach the TV brackets to the TV, and assemble the two sides of the Wall plate. It is installed on a formerly outside wall, now inside a bedroom in an addition. This is only relevant because the original outside wall studs are 24" on center. After detecting the studs and determining the height we wanted the TV, we put the template centered between the studs. The outside slots to mount the Wall Plate to the studs barely made it to the studs. We leveled the template and marked the slots on the wall. Because the pilot holes being drilled for the lag bolts were so close to the edge of the studs, I had my wife drill the holes angled inward toward the center of the studs. We drilled one side's holes and started the lag bolts so we could level and drill the third hole and start the third lag bolt. We did so and lastly drilled the fourth pilot hole and tightened all the lag bolts. We tilted the TV mounts out to 8 degrees and placed the TV on the Wall plate. It did not fall off the wall! A digital copy of the Installation Instruction is not available on the Mounting Dream website nor on the Mounting Dream Amazon Store which is frustrating. I like to keep a hard copy of the manuals as well as a digital copy on my network. I like the mount in spite of the missing parts and buggered up M6 bolt. If we had 16" studs, it would have been less stressful, but that's not Mounting Dream's fault.

First off, installation is a breeze. The instructions are so clear that your pet goldfish could probably figure it out (though I don't recommend letting them near power tools). The included leveler is great for those that don't have a toolbox at home, and it's magnetic so I was able to set it up by myself with the level falling off every two seconds. This mount is sleek and low-profile, and it has a tilt function, which is somewhat limited but still function. I have this mount holding my bedroom tv and it works perfectly, but if your TV was going to be higher than ~6 ft I'm not sure how great this would work. I give it 5 stars only even with the limited range of motion because it does exactly what it says and is perfectly functional, just make sure you know its does not have horizontal movement, on vertical. Overall, it's practical, easy to install, and can add a touch of elegance to the room.

Easy to install and secure! Enough room in the middle of the mount to put the outlet for a clean install and when flush the plugs will fit. Note that there is though room between the back of the TV and the wall for your streaming box.

The quality is super strong and effective. I bought this in 2020 and I’m still using it today. It was so easy to put up all the hardware was in the box and great instructions there also is a level that helps you keep everything straight. would definitely recommend this for anyone that wants an easy installation process.

Alright so i waited a couple days to post a review. What i like about this product is that it does it what it says(mounts your tv :) ). It is quite sturdy and not at all complicated to put together. It comes with instructions and a small leveling tool. I would recommend you get this for the recommended tv sizes each version can hold. It does have a slight tilt forward i believe a few degrees forward. The tilt is decent enough depending on how far the tv is from the bed and how far up you place your tv. If its above your eye level then you might want another product depending on how big your tv is. If its just at eye level and below then you should be good. This took me about 1 1/2 hours because i wanted to make sure it was even and that it was going to be secure. Also it took me awhile to figure out how to operate the hand drill properly before i could get things to go smooth. The 4th picture is all the tools i used to mount my tv. Tools Needed Stud Finder Small v8-v10 Hand Drill 5/32 drill bit Tape measurer Some sort of leveling tool for evenness (if you want to go cheap and put it in the drywall with drywall studs i suggest you dont get a tv mount because that isn't as secure as putting it into the studs.) If you don’t have money like that you can use the tape measure instead of the stud finder. Just remember each outlet is attached to a stud and each stud is 16 or 24 inches apart from the middle. Also there are studs that are usually centered to the room. So be careful of pipeline or electrical lines. For concrete and brick walls refer to youtube for your instructions.

Sin duda es muy fácil de instalar, cuenta con todas las opciones necesarias , además que el precio es el correcto su calidad es excelente. Llego en tiempo y sin daños. Solo una sugerencia hay dos versiones de este modelo. si pueden comprar el otro, ya que trae una plantilla y el nivel está imantado.

I used this for my 40" TV, 400x200mm VESA. Its a perfect fit and has a bit of room to adjust it a bit. It's study and there's no way the TV is going to fall. The instructions are really good and makes the installation so easy. The troubleshooting manuals cover the main issues someone might have as well. Important note: if your wall studs are off-centre, there is no room for a tv with 400mm width to shift left or right. The part that attaches to the TV will already be at the edges of the wall plate. In this case, you will need a bigger wall mount.

Excelente. De las mejores opciones que no desperdician espacio ni conveniencia.

It does the job. The TV is secure with no fear of falling.

Es un producto sólido y de buen material, yo lo utilicé para Smart Tv Samsung 43 pulgadas y quedó bastante bien, solo que si me costó un poco de trabajo colocarlo en la pared debido a que es concreto, pero con unos taquetes se solucionó (ojo que no trae taquetes). No se necesita de muchas herramientas y el nivel que trae ayuda mucho para colocarlo de manera correcta.