LB-00201 Features: -Make sure all surfaces are clean and free from grease. Excess adhesive can be wiped away with organic solvent. -Once adhesive applied, parts should be assembled within 15 minutes. Bond should be held clamped until adhesive has fixture. -Recommended bond line gap is 0.1 mm. Where bond gabs are large (up to max of 0.5 mm, or faster cure speed is required, Lido-Weld primer should be applied to both surfaces. Parts should be assembled immediately (within 1 minute). -Product should be allowed to develop full strength before subjecting to any service loads (typically 24 to 72 hours after assembly, depending on bond gap, materials and ambient conditions). -Made in the USA. Country of Manufacture: -United States. Volume: -1.69 Ounces. Permanence: -Permanent. For Use With: -Metal. Product Type: -Liquid Glue/Adhesive Putty. Dimensions: Overall Height - Top to Bottom: -6". Overall Width - Side to Side: -2". Overall Depth - Front to Back: -1 Millimeters. Overall Product Weight: -.2 lbs.
Trustpilot
1 week ago
1 week ago
