Happybuy Electric Hydraulic Rebar Bender,900W Portable Electric Rebar Bender,Bending up to 5/8 Inch #5 4-16mm Rebar Bending Angle 0-90 Degrees,110V,with Positioning Bolt(900W RB-16)

Has been dependable. Gets the job done. We use it on 1/2" rebar most of the time

This unit was a lifesaver. I was working on a ADU build, and this bent rebar with no problem. Fast, easy and safe.

Good machine I bent about 500 sticks of rebar both #4 and #5 without issue. It is a 90 degree bend so if you need a larger curve this machine won’t do that. It’s easy to use, I recommend it.

It's light weight and can't manage heavy stuff

Putting up an ICF wall that had special requirements and had to use #5rebar. This tool works faster than you can load it literally seconds as if it was bending a straw.

I have arthritis in my back and my knee (need a knee replacement). Bending #4 rebar manually was doable but my structural engineer threw #5 into the mix this year. Bending #5 manually takes every ounce of energy and really hurts both my knee and back. I just bought this bender and OMG, this is incredible!!! I should have bought one of these years ago. It bends #5 rebar in seconds. Do yourself a favor and by one of these and avoid the aggravation of manual bending. We're building an off-the-grid ICF medieval castle (Keene Castle). We have to bend hundreds of these #5 corner pieces. My back is happy I don't have to do this manually any more.

opened a box the morning after it showed up, plugged it in and the plunger only moved 1/4", tried it about 20 times and still didn't work... looks like I might have to repair a brand new tool.. not "happy" buy, should have known by the name It was a piece of ......

This is a great machine for the money. It is a bit heavy to work with but bent my rebar for my new home - no problem. even able to bend two at a time for smaller 1/2inch piece. Great Buy

I mean, if you have to custom bend 10M or 15M bars, you can always use pipes or some other mechanical means, but this makes it so easy to make a nice tight bend. Sometimes you have to bend rebar on site, and this machine does that. Will it last? I don't know. I've only made a few bends with it, but it did so quickly without sounding stressed. I would love the Metabo unit, but that's 6 times the cost. This works fine. Edit: I should add that if you're bending custom 10M stirrups with this, and you know the outside of your vertical bars are (say) 20" apart, simply make a two marks on the 10M bar, 20" apart. Bend exactly at those marks. Simple. If you want to bend hooks with that 10M, add 3/8" at each hook and you spacing will be perfect.

Works great on 1/2” & 5/8

I've rented many rebar benders in my construction business and this thing competes easily against the $3000 machines for only a few hundred bucks. Don't even waste your time renting, just buy this and use it like it's a rental and you will be pleasantly surprised at how well this thing takes it. My local rental store actually uses these and has never had a failure yet. That says it all for me

Used this for 1 job so far to bend 800 linear feat of 15m (15mm 5/8” rebar) this tool had no problems with it. When it bends it slightly rolls forward so you have to compensate for it before you start bending to get the bends to line up properly. Does not come with a carrying case. The unit itself is fairly heavy. Only used it for 1 job so far not sure how it will hold up long term yet, but build quality seems good.

If this thing hold up for a few years it will have been well worth the money. It’s incredibly fast and easy to use. Very effective and makes heavy work light and easy.