Question 1

Dose this unit have a relay output on board

Accepted Answer

I haven't looked but they are only designed for a stand alone device. They wouldn't bother the extra cost of a relay

Question 2

How do I attach to the ceiling?

Accepted Answer

Inside the box you will find some screws and also some plastic plugs. Step 1: Look at the alarms mounting base. Find where the screws will hold the mounting base onto the ceiling. These are usually holes that are shaped like an old-fashioned keyhole. Step 2: Hold the base plate of the alarm against the ceiling and use a pencil to make 2 marks on the ceiling, at the locations where you need the screws to go into the ceiling. Step 3: Set up your drill by inserting a drill-bit which is slightly smaller in thickness than the plastic plugs your alarm came with. Now, drill holes in the ceiling where you marked with the pencil. Step 4: Use a hammer to tap the plastic plugs into/inside the holes you have made. If the holes are too tight, use a slightly bigger drill-bit. But, don't make the holes too big or the plastic plugs will just fall out. Step 5: Hold the plastic mounting base onto the ceiling with one hand. With the other hand, use a screw and screwdriver to attach the mounting base onto the ceiling by screwing the screw into the plastic plug (which you just tapped into the ceiling using the hammer in the previous step.) Repeat this for the other screw. The screws in the ceiling should now support the mounting base of the alarm and hold it against the ceiling. Ensure the screws are tight, but do not tighten them too much or you will break/bend the mounting plate. Step 6: Now put the alarm itself onto the mounting plate on the ceiling. You may need to read the manufacturers instructions on how this procedure is done.

Question 3

If i wanted to buy a new one, could i use an existing base plate.  Father recently died and wanted to just replace base plate once and swap them round

Accepted Answer

If the old alarm is the same model as this one (10Y29) then yes, you can re-use the old base plate.

Question 4

Is this suitable for kitchen containing gas boiler?

Accepted Answer

It is suitable for use in a kitchen. It is also best to have a heat alarm in the kitchen and a carbon monoxide alarm at least 1 metre away from your gas boiler but no more than 3 metres away.

ASIN	B07FRZ1NQF
Alarm	Audible
Best Sellers Rank	1,456 in DIY & Tools ( See Top 100 in DIY & Tools ) 10 in Smoke Alarms 141 in Home Security Systems
Brand	Kidde
Colour	White
Customer Reviews	4.4 out of 5 stars 3,430 Reviews
Included Components	2 x Smoke Alarm, Battery, Fixing Screws, Manual, Mounting Bracket
Item Dimensions D x W x H	104D x 45W x 104H millimetres
Item Type Name	Kidde Smoke Alarms 2 Pack 10 Year Battery Life
Item Weight	134 Grams
Item weight	134 Grams
Manufacturer	Kidde
Manufacturer Warranty Description	10 year manufacturer's warranty.
Material	Plastic
Model Number	233045
Number of Items	2
Part Number	233045
Power source	Battery Powered
Product Style	Twin Pack
Product dimensions	104D x 45W x 104H millimetres
Style	Twin Pack
UPC	047871276974
Unit Count	1.0 gram

Kidde 10Y29 RB Ten Year Life Sealed Battery Smoke Alarm Twin Pack

Details

Details

Description

Specifications

Common Questions