Smatree Carrying Case for GoPro Hero 6/5/4/3+/3/2/1,for GOPRO HERO (2018)(Camera and Accessories are NOT included)-Large

This is a very solid case for your GoPro. I bought this to help carry around my GoPro Hero 5 Black and accessories.Every camera should have a good case, especially your expensive GoPro. Depending on your needs and the amount of cameras and accessories that you plan on carrying around, the size you might need will vary. This case is the perfect size for a small set of accessories with a single GoPro, or even multiple GoPros with less accessories. It is on the smaller side, but for me, that's exactly what I was looking for. This easily holds my GoPro Hero 5 Black, Rode VideoMicro microphone, suction cup mount, and flexible mini tripod. I also have a couple of extra batteries and cables tucked away neatly in the case.I'm impressed with the quality of the case materials. The outer shell is a fairly hard shell, but slightly softer than a hard plastic case. It has a nice fabric covering along with a sturdy handle. The zipper is solid and high quality, so no need to worry about the zipper breaking or zipping improperly. Inside, you'll find a nice qualify foam material that has pre-cut patterns. There is some flexibility in how you configure the case provided by the removable foam pieces. Configure it to your specific needs once you get the case. For my needs, I've removed the larger section on the left of the case where I store my mount and a couple of cables. I'm using the battery slots in the middle of the case for extra batteries. My single GoPro Hero 5 Black is on the right in one of the camera slots and the other camera slot is nearly perfect for the Rode VideoMicro. The mini tripod fits into the zippered pocket on the lid, but be careful that you're not crushing any of your sensitive equipment in the lower case when you close it. The fit is tight with the tripod, but it's nearly perfect without it. If you have more equipment that what I have, you might be better off with a bigger case or even multiple cases.The only downside to this case is that it provides mediocre protection from really rough handling. Now, for a large majority of people, this will provide more than enough protection. However, if you need a case that will really protect your equipment from being roughed up (i.e. if you need to be able to toss this case around without care), then you'll want a more expensive case with a hard shell and tight fitting foam. This will protect your equipment just fine if you drop the case while carrying it, let the case slide around in a vehicle, or other similar mishandling. But the outer shell is only semi-hard and the inner shell only has a thin padded layer, so a rough impact could damage your equipment. The foam cutouts, while convenient and configurable, aren't extremely tight fitting for the camera. So you wouldn't want to just toss this case around. But we're really stretching for a downside here given the price and the intended use of this case. In fact, I can't even take a star away from the rating because that's not the intended protection level of this case. Handle it with moderate care and you'll be just fine.All in all, this is a solid case and I would highly recommend it.Pros:+ Quality of materials+ Price+ Configurable+ Aesthetically pleasing designCons:- Slightly on the small side- Moderate protection (But really, is this a con given the price point and intended use case?)

Pros:Gets the job done. I and a couple of other friend have this case, and it's definitely good and very versatile. I was able to get 2 HERO4's, 4 batteries, a 3-Way mount, Sony CLM-V55 field monitor, GoPro HDMI cable, a Battery BacPac, and LCD BacPac, Pelican SD card case, long USB cable, GoPro Smart Remote, remotes charging cable, couple of GoPro USB cables, and a 16000+ mAh battery pack all into his case at once. COMFORTABLY! It closed easily and nothing ever got damaged.Thoroughly impressed to say the least.Cons:No should strap, this would have made it nearly perfect. No weather proofing. Taking into consideration That this is for GoPro cameras, you'd think it would be a bit more ruggedized to match the fact that you're using a GoPro. You want to protect your stuff even "on your way" to your next adventure.Conclusion:Solid case, PERIOD. You can store a lot, and it's done easily. This is the deal maker here. If it had a shoulder strap/sling, and had more weather proofing, it would be the PERFECT case for GoPro and I couldn't look to anything further. However this is still a TOUGH case, but the extra mile was needed here.

This case is a must have for any GoPro enthusiast.Why?Three reasons:1) I love the modular design of the interior foam. The various precut slots allow you to customize your case to best meet your personal needs. With this case there is no need to measure and cut slots for each of your GoPro accessories; that tedious work is already done for you.2) Which brings me to my second reason. The space in this case is ample for light to medium GoPro users. I easily fit 2 cameras, a 25 all in one acessory kit, two extra batteries, and a dual battery charger. Use the space wisely, and this case will be able to hold everything you need.3) Rugged. This case protects my cameras and my acessories well. The rigid design is a perfect blend of protection without overburdening weight. The case won't survive being run over by a car, but it will protect against regular use, and the occasional enthusiastic abuse (and that is what i needed it to do).All in all it is a good case for a reasonable price.

Nice product, lot's of room. Semi hard outer surface provides good protection for what's inside. The multitude of foam cutouts gives you tons of options for protected storage of accessories. Exception: I just wish it was made taller so large items could be put in the zippered pocket and you could still close the cover easier. As it is, that pocket is restricted to soft items, manuals and cords. There's just no way some of the stuff pictured in Amazon as fitting in there could possibly fit in the pocket and the cover close without damaging things stored in the main body of the case. Still most of the accessories I use frequently fit decently with a little careful packing. Then, of course, you always have the carabineer to hang a secondary case on for those items that won't fit inside.

So I had to get the biggest case because, at first, I thought I'd be getting a selfie stick for my GoPro Hero3+ that was 12" when fully contracted. But instead I got the foldable aluminum Smatree selfie stick pole (blue), which when fully contracted, is only 5.9 inches! I was thinking about returning this case, but I have so many other accessories for my GoPro i.e. 3 extra batteries, 2 chargers, a gopro handler handle, 2 USB chords, the included mounts and everything else included with the GoPro, etc...So this large case by KUMU WORLD fits everything i need! Plus, I might be getting more stuff for my GoPro so I will need the extra space.From the pics you can see how big it is compared to my hand, and you can see that there is still plenty of room for any other things I want to throw in there. Also, this case feels very durable. Your GoPro and all it's stuff will definitely be safe.Definitely recommend!