ドライブレコーダー OBD ハードワイヤキット 電源ケーブルタイプ USB Cポート、10フィート 12V-24V~5V、ドライブレコーダー用、低電圧保護

I’m very happy with the REDTIGER OBD Hardwire Kit. The installation is incredibly simple, just plug it into the OBD port and connect the USB C cable to the dash cam. No complicated wiring or professional installation is required. The 12V–24V input and 5V/3A output make it versatile for different vehicles, and the low voltage protection provides extra peace of mind when using the 24 hour parking monitoring feature. I also really like the clean, non-invasive installation without having to access the fuse box. The build quality feels good, the cable is convenient, and the Type C connection makes it easy to use. The 18 month assurance is also reassuring. Overall, an excellent accessory for REDTIGER dash cams and a great option for anyone looking for an easy parking-mode power solution. Highly recommended!

After 10-15 minutes of driving it would turn off my dash cam [Viofo a229 plus] in my car [CHR 2024 PHEV] The dash cam works fine on the cigarette Lighter connection so that rules out issues with the dash cam or SD card. The length of the cable from the USB C connection to the voltage box was 75 inches, and from there 37 inches to the OBD connector.

Was the perfect solution for me. I have a 2015 Chrysler 200 and on my particular vehicle there were no ACC fuses in interior fuse box so fuse tap was useless unless I ran it through fire wall to outside fuse box, For some reason my car didn't match any fuse configuration I found online or in my manual. VIOFO dash Cam voltage cutoff for parking mode is found inline on the hardwire kit and cuts the circuit to dash cam if voltage drops below setting, so needed a solution that did same. There are generic OBD II kits out there but I was leery of them so went with name brand This was the perfect choice. as it has a type C connector and same voltage output as VIOFO hardwire kit. Functions superbly. Cuts off voltage when reaches setting. Powers camera In normal and parking modes properly. Just FYI your OBD port doesn't usually go to sleep right away so may be 5 minutes or more before it switches to parking mode. Not been a issue. I also like that the voltage is displayed in the power module so you can see voltage. Didn't put a voltage meter on car but it matched my cars voltage display on dash readout. For those reading online blogs that are leery of OBD II power options and sending bad signal to computer, the 2 OBD II connectors that I have used, this one and Blackvue's, only have power pins. They DO NOT connect to the data pins. In Summary This worked great for my particular setup and car. Hope this helps

I bought this hardwire kit as a way to power my VIOFO dash cam and it works flawlessly. Installation was incredibly easy and the hardwire kit itself came with ample wire length so it covered all the distance I needed plus more if I ever decide to buy a larger car. Even better was how the kit itself shows the voltage of the car, it provides a great baseline on what the best option would be for when it should cutoff the power draw. This specific part of the kit came with a sticky pad so that you can mount it on a plastic trim if needed.

Item was perfectly acceptable but was required more quickly than the delivery date so another item was purchase instead and this item returned for refund