Gatemate 1490096 Euro P11 Long Throw Double Lock, Black/Stainless Steel, 70 mm

In the box you'll find the following:Lock assembly5 keysLock keep8qty, T30 anti-tamper security screwsT30 Security screw bit driver2qty PH1 no3 stainless screws19mm wood drill bit (useless)4.5mm general drill bit (not sure what for)Chrome plated escutcheon2 self adhesive drill templatesFixing instructionsLock dimensions:Lock barrel length from housing backplate (max gate thickness 74mm)Bolt throw RH mounting 81mmBolt throw LH mounting 84mmNow the lock feels substantial, with its 18mm square bolt and the black powder coated housing and lock keep, both equally as heavy duty.Installation is relatively painless, after modifying my gate by adding a block of white oak to carry the new lock, the first thing I noticed, the self adhesive template struggled to stick to a soggy, rough sawn garden gate, nevertheless a bit of gaffa tape later I started to drill the two required 19mm holes that the lock goes through.Once drilled I moved onto mounting the lock, now it's worth mentioning that, as with most pressure treated wood, it's soft, with that the instructions called for me to drill the holes with a 3.5mm drill bit, yet the one enclosed was a 4.5mm, regardless that predrilled holes would only later weaken the screws grip of the gate timber I just sent the screws straight in, even the ones that went into the bone dry oak, with the use of a 9yo cordless drill, sank in without hesitation.The lock keep has a plastic insert with a sprung tab that is there to minimize gate rattle in high winds and looks like it should be OK in the long run, just make sure in installation that it's the correct way round before fastening down as the lock bolt will not fully lock if it's the wrong way.I had added some red grease to my lock just to help it in the long run, the lock barrel is a bespoke type and unlike common lock barrels that have a cam which turns with a key, this barrel uses a sprocket that drives the pin via its predrilled holes (as seen from underneath the bolt) this type of barrel is not a common variety on the market so would probably be hard to source.I did like the included anti-tamper screws (as I planned to use coach bolts, and may still swap two out later on the lock) but both of the drill bits included were a waste of time as the 19mm one bent while drilling the first hole, and had I used the enclosed 4.5mm drill bit, they would have opened the mounting holes too much and resulted in remounting the lock a second time leaving holes all over the place.Ive still rated it as a 5 star as the product is better than I expected and I would buy either this one again or another from this range now, granted the included drill bits were a bit useless but using my own wasn't a deal breaker as I already expected to use my own.Ease of installation 5*Instructions 4*Delivery 5*Build quality 5*Accessories 2*

Brilliant product

A sturdy, well built and quality lock. Came with clear instructions, drill template and various bits needed to install the lock.Followed suggestions in the other reviews and:- did not bother with the pilot holes for the security screws, they went in fine without and will likely have a stronger grip.- used my own 18mm drill spade (for some reason a 19mm spade is provided even though the instructions ask for 18mm).

This is a really neat and thoughtfully packaged kit, The lock body itself is sturdy powercoated steel, and quite confidence inspiring, it comes with long, decent sized,stainless steel tamperproof screws, and importantly, also with a driver bit. There's a decent, oversized keep with a plastic liner, again with tamperproof screws, and a polished stainless steel escutcheon. There's a pair of drilling template stickers for alignment (one left one right handed), decent written instructions (in good English, for those that consider such things important). And finally, it comes with a pair of drill bits: One presumably a pilot drill for the screws, the other spade bit for the lock body.The problem, is the drill bits were the wrong size. the pilot drill was 5mm, and the spade drill was 19mm. The (clear) instructions stated the drill for the screws should be 3.5mm and the spade for the lock body should be 18mm - okay this is probably a bit pedantic, but for the hard of thinking if you used the 5mm pilot drill, it would spoil your day as you'd probably find the security screws would then pull out of even slightly softer would without much effort.As it was I had the right drill bits in my toolbox, so fitting wasn't much of a problem at all.If I was being really picky, I'd also say the steel escutcheon could do with a bit more de-burring, but that's really super fussy.All in all I like the thought that went into the kit, but the attention to detail needs a bit of work.

Well impressed with this lock, like to see someone get through that. Easy to fit,great quality, right amount of keys.

Absolutely perfect — everything you need is right in the box, including the fantastic bits! It's very sturdy and well-built, with a secure lock that you can rely on.

This is a brilliant lock it's very well made and has everything you need, drill bit, pilot drill and hex bit. the stick on template make it so easy. I had to add some plywood to the back of the shed door to build it up and make the door stronger and the whole job only took about an hour.

Expensive for what it is

Perfect slot voor tuinpoorten alleen goed opletten voor de maat omdat het op de foto niet echt duidelijk is US maten ik heb de duurste versie genomen en die was perfect en voelt heel sterk aan

Bra produkt som väl uppfyller mitt syfte med låset. Dock helt värdelös frakt via airmee. Fraktalternativet drar ner helhetsbetyget

I bought this lock for a shed that faces an alley and needs security. Its simple enough to install with the supplied template...the 19 mm bit included leaves a lot to be desired, so I used a hole saw instead.The screws are security style and the bit is included. With the 5 included keys, it saves a step of getting extra keys cut. The bolt is 19 mm square and solid. The entire set is superior quality.

Zeer tevreden

Well-made, sturdy, and smooth. I originally bought this lock for my wooden gates, and it has worked perfectly. I ordered another for my white barn doors, but it didn’t match the look, so I returned it. It’s an excellent lock for gates, and several of my friends have bought it and are very happy with it.