Feedback Sports Rakk Bicycle Floor Storage Stand Road/MTB/Gravel/E Bikes

Typically, once me and the family arrive onsite, we would just have to unload and lay our bikes down on the ground. Not a big deal, but they were becoming a bit of a trip hazard and taking up a fair amount of space. So I started looking for a stable but small stand so it didn't take up alot of space in the bed of the truck. After some trial and error, I finally found this stand and am really happy with it. The size is perfect, build quality is good and helps hold our bikes up to rinse off after a ride. I carry a RinseKit with me, so after a ride, I can put the bike in the stand anywhere I want and then spray it down with the RinseKit before loading back up to go home. So it's been a nice improvement for our rides and I'd recommend it. Here are my Pros and Cons: Pros: - Item came fully assembled right out of the box - Build quality seems good and sturdy (time will tell) - Smaller size is a pro for me. It's big enough to hold my full size bike, but small enough that it doesn't take up storage space. - Foldable - Ability to connect or daisy-chain to other holders. (I don't use this, but seems like a nice option) - Stand is helpful holding the bike up to wash it after a ride Cons: - Tire can stick into the stand making difficult to pull the bike out at times - Can pinch fingers when folding/unfolding (Not really a con, but something to look out for) - I haven't experienced this, but have seen other reviews saying that it can be difficult to put bikes in the stand when they are daisy-chained together.

Great stand Love it!

I did a lot of searching for bike stands to prop up my three bikes. I live in a condo so I couldn't use a wall mount or a floor-to-ceiling stand. One of my bikes is on a Park PCS-1 workstand, but that is too bulky and takes us too much space to use as a bike rack, so I was looking for a small stand that could a) prop up a bike and keep it from leaning against the wall, b) take up a minimal space, and c)not look terrible. I checked a variety of racks, including SuperStand, Rakk, and Saris. Of these, I thought Rakk was best. It's small (smaller than I thought), holds the bikes reasonably well, and is stylish. At first, I thought it was hard to load the bike: you need to push a small button, lift the roller arm, and slide the bike in. 3 things, 2 hands. Then I realized you can lock the arm in the vertical position as you load your bike. 700cc road bike tires fit well. Large MTN bike tires don't fit as well and the bike leans just a little, but not like some of the other stands. Is it perfect? No, but I liked it enough to buy three - one for each bike.

I have had this stand for a while now, and I like it in general. I am actually considering buying another for a second bike I have to store. I have 2 MTB bikes right now, and no desire for more. My main bike is not cheap, so I am careful when storing it. Pros: It is easy to use. It works pretty well. No construction issues. It has held up fine, with minimal abuse from me. Cons: My bike leans if I put it straight in via the front wheel. I'm a little concerned so I make sure to angle the rear so that the bike is vertical. I have less confidence putting the rear in, as the front wheel is more likely to wobble/turn. I have 2.1 tires on my MTB, and they seem to have enough nubs that the fit isn't always smooth and centered. I sometimes have to wiggle the bike until I feel comfortable. Taking the bike out sometimes drags the stand a bit. Maybe pushing down on the bike as you remove it is best.

We just got 2 new bikes and we wanted to store them properly, not in a heap like we stored our old mountain bike. The bike store recommended the Saris floor rack but it was total junk in our book. Go see my review on it for more details. We returned them after a weeks trial. We then started looking high and low for better racks. All of the reviews I saw about other racks talked about a wide range of problems with undue pressure on spokes, or problems with bikes with disk brakes (which we have). Since Amazon has this product incorrectly categorized, I didn't find it right away! Amazon has it incorrectly categorized as a "Cargo Rack" instead of the more proper "Indoor Bike Storage" Finally the sales lady at the local REI store recommended this rack, which they didn't have in stock. I finally found it on Amazon and ordered two. In my book they're about as perfect as they get. The properly support the bikes by the wheel, not putting any undue pressure on any components. The bikes EASILY go into and out of the rack. If you don't have fenders, you can use the rack on either wheel. If you do have fenders (we don't) it may keep you from putting the bike in backwards (supporting it by the back wheel). Note - If you only have ONE rack, just put your foot on one of the legs of the rack when putting the bike into the rack - this keeps it from moving. Two racks strapped together, don't move when added or removing your bikes. The racks are still easily movable. The clips that can attach multiple racks in a row are easily configured for a line or (small or large) circular arrangements. You can also adjust the inter-rack spacing if using the linear arrangements.

Ive tried the stands that slide the back wheel in and secures it, but it uses the spokes to keep it upright. I was never confident that it wasnt damaging the true to my wheel or weakaning my spokes. I was always paranoid that someone would accidentally hit the bike and deflect he spokes. The stands that use the bottom bracket were always a pain and took to long and prone to tipping over. I dont have any worries about this stand. Its so easy, and secure! Instead of putting pressure on the spokes it use the rear tire to to keep it upright and secure. Ive been riding for the past 18+ years(Road and some Mtn), I really dont know why I waitied so long too get this stand. Cant say enough about this bike stand. Inexpensive, easy, practical, secure, and bulid quality is excellent. Absoulutly no worries about this stand. If your tired of leaning youe bike on the wall, get this. Its the best stand.

Simple and reliable design. I use it to store my Specialized Roubaix SWorks in my garage so it doesn’t lean against anything. Since it folds so compact and is light I’ve taken it on my car when I went out of town for an organized ride (Wine Country Century) and stayed in a hotel

I absolutely love this stand. I keep my bikes in my home because they're like my children; very beautiful, expensive children that don't deserve to be kept in dirty, musty, damp storage rooms. I've always just carefully leaned them against things or tried to find creative ways to prop them up which really got annoying. Randomly did a Google search for bike stands thinking I was going to end up finding absurdly large stands that wouldn't be any use to me in a home. But then I found this and it's perfect! Maybe I’m a little too excited about this thing but sometimes you find a product somewhere that’s just one of those things you didn’t really know you really needed and once you get it you can’t live without. Yep, it’s like that. It’s small, durable, and holds your bike firmly in place. Obviously if you push it around too much or knock against it too hard the bike will fall but I haven’t had it happen yet. You can also connect multiple stands together if you have more than one bike and at a very reasonable price you can order several without it costing a fortune. I’m just really happy with this stand and definitely plan to order more.

Bon produit, Permets de maintenir le vélo droit sans être appuyé contre un mur ou autre. Fonctionne avec le roue avant ou arrière. Pas de mécanisme à activer, suffit de glisser la roue du vélo dans le support au sol. Au top.

Excellent stand, fantastic.

I chose this item because, unlike most others, it has an ingenious spring-loaded feature that holds the bike upright. With fixed width wheel cradles, it's a lottery. If your tyre fits snugly between the guides then you win. If it's not snug, the bike flops all over the place. The spring-loaded arm on this product holds my bike perfectly straight, and I can't see any reason why it won't do the same for bikes with a wide-range of tyre-widths. To start with, the packaging looked smart. Clearly this doesn't influence how the product performs, but it suggests that things are going to be good. And they are! The well-finished product has a sturdy feel to it, but it's not crude or clunky. It came pre-assembled so all there is to do is to release the spring loaded arm and push the bike into the stand. I only needed one, but multiples can easily be fixed together as each one comes with pivot clips so the stands can be daisy-chained together. The pivot clips fold out of the way if not being used. All things considered, this product is perfect for my needs and, to cap it all, it comes with a 2-yr warranty.

Yo tengo una bicicleta hibrida y me costo bastante encontrar un soporte que admitiera este tipo de ruedas tan estrechas, ahora la mayoria sirven para las bicicletas electricas con ruedas anchas pero las de rueda estrecha no las sujeta bien. Esta, sin embargo, sirve perfectamente y mantiene la bicileta en vertical, incluso con el manillar girado, se la ve muy segura, empujas la bici y sigue estable Si tienes una bicicleta hibrida o carretera, recomendado totalmente

Great stand, super affordable. With is small footprint, this stand works great for people that are limited in space. It is extremely stable and allows me to store my bike without having to rest it on a wall or other item keeping the frame free of scratches. The bike shown has 2.10 tires and it fits perfectly however smaller and slightly wider tires will also work. Highly recommended and wish I would have bought one years ago.