VIVO Ultra Wide TV Desk Mount for up to 55 inch Screens Weighing 66 lbs, Full Motion Height Adjustable Single Television Stand, Black, STAND-V155C

I was looking for a mount for my Dell U4919DW 49" Ultrawide monitor. This class of monitor is a bit awkward to find mounts for because most single screen mounts aren't rated for this weight, and those that are are typically dual mounts. I wanted a mount that would fix the monitor at my desired height and not take up a lot of space. I didn't want an adjustable arm; in my experience those place the screen lower than I want and for a 49" screen it's not really practice to swing and move around the desk. This mount comes with a variety of hardware for mounting to different VESA mount sizes, but none of the included screws are compatible with the Dell U4919DW which has a recessed VESA mount; the mounting plate included with this mount is too large and requires using the included spacers. The included hardware has large/long bolts that won't help here, but you can pick up 4x M4 25mm Steel Pan Head Machine screws on amazon for a few dollars (eg: https://www.amazon.com/gp/product/B00F32E91G). The mount is sturdy and, despite its simple and basic construction, it looks good and has nice clean lines. Replacing the Dell monitor mount frees up 1 square foot of desk space which makes my desk feel more open again. Assembly was straightforward once I had sourced the longer M4 screws that I needed for my monitor.

Whether your monitor is 36" or 55", this will be your life from now on, Arm Life.This mount is amazingly sturdy and has held my 50", 30lb monitor for over a year, and the bottom of my desk has a bevel so this is all holding without even being fully secured to the desk. The desk space you get back from removing the original Monitor leg stand will have you stretching your arms out like a cat just because you can.This is the next level in your computer setup if you don't already own one.Top recommendation.

I mounted a 46" Samsung LED TV to my workbench in the garage. There weren't many choices for a TV desk mount with this weight capacity. This one does the job just fine but has room for some improvement. My TV is only a little over half max weight capacity, no issues there. Has a slight wobble if you touch it though that gives you the impression it's not stable. It uses nuts and bolts to adjust view angle. I'd expect you'd have to really torque it down to keep it from moving for a larger TV, not really made to be adjusted often. The thread on one of my brackets was off or slightly damaged when it was made. The screw going into that bracket wouldn't go all the way in. I basically had to take a fairly large screwdriver to force it in without stripping the head. In the end I'm happy with their product, it worked for what I needed it for and their price was fair.

I was skeptical about this desk mount. I have a LG 49" TV that I use as a monitor for my computer. I needed a better way to have the monitor on the desk, so I could clear up some room. This looked like it would do the job. It took about an hour to get everything setup. It is sturdy as heck, but, does have some play side to side. The monitor is angled down a little bit more than I like, but that can be fixed with a washer or 2. The mount doesn't really like desks that have a railing under the top, that is 1/2" to 3/4" from the edge. It's workable, but can be a pain. All in all, I'm pretty impressed with the mount. It is holding the TV and cleared A LOT of room off my desk. Might have to get a couple more. One for my son's setup and another for another monitor on the setup.

This is a great monitor stand that is handling my large 43" 4K monitor easily. It looks great and was easy to install (comparable to other good monitor stands). The only complaint I have is that the tilt adjustment is so minor, it basically doesn't tilt. If you want something that really tilts more than 5 degrees, get a different mount.

If you have a larger TV, there's an included adapter that enables VESA 200 and 200x100 mm mounting. However, there are two sets of parts to the adapter that look almost identical until you realize they are mirror images of each other. The instructions list them as separate parts in the part list, but don't reference them at the appropriate spot in the instructions. The instructions are also incredibly unclear compared to the average-- my partner and I are building a ton of furniture after moving to a new place, and it took us more time to build this than it took to build a bookcase and a 6ft complex cat tree, combined. Lastly, even after figuring out the last details of the instructions and seeing how we had missed the mirror image pieces, we still were unable to get one of the holes to align correctly for our VESA 200 mount TV. I think one of the parts was incorrectly made. You can see how I jury-rigged a solution to our problem by leaving out a screw and mounting a piece incorrectly. The solution seems sturdy, at least, and the finished product seems very sturdy and able to hold our 40" TV with relative ease. No sliding or tipping for us once it was fully tightened. For that reason, and the fact that I think it'll end up doing what we want it for just fine, I'm giving three stars. However, be prepared to spend time setting it up, and read the instructions VERY CAREFULLY!

Bought this desk mount for my LG Oled C3 42 inch TV to raise it from the desk. I needed a desk mount instead of an arm since I never move the TV. I just wanted to raise it higher on my desk to be better aligned with my eye level. You can of course rotate the tv and tilt it a little bit as well. The stand is simply great. Very sturdy on my raisable IKEA Uppspel desk which is made in cooperation with Asus ROG. I've attached before and after photos of my setup. It took some time to adjust the mount and I really think it's a 2 persons job. The clamps mount just fine on the IKEA Uppspel table. I even have a Philips Hue led strip in between the clamp and the table. Everything comes in the box and I used the extra plates (which are included in the box) to enlarge the tv-VESA holes to 300 x 200 to match the dimensions on the C3 42. For references I used the M6 (6mm) bolts from the package which came with the stand. Highly recommended product!

Excellent option for desk mounting heavier monitors. I used it with a 48" LG C3 at a LAN party. It gave me enough desk space to still share a 6' folding table with a friend's PC. Easy to use and set up. Seems very sturdy, though I wouldn't push it.

Got the delivery within 2 days wasn't sure if it would hold my 36" TV. The assembly took a bit of time which was fun and sturdiness is fantastic. Built like a tank holds the TV perfectly in place without any titling or any other issues. Delivery, Price & Functionality 10/10. Highly recommend.

Se nota que es de una muy buena manufactura, muy resistente y sin problema aguanta mi pantalla de 42"

Bought it to mount a 50" TV to a desk for use as a giant PC monitor. The stand does that job perfectly, it's very strong and looks nice with a very small desktop footprint which is important for me due to PC accessories like keyboard, mouse, graphics tablet etc. The pole is a good height and allows for lots of vertical adjustment. My 50" TV is positioned with a clearance of 14cm under the TV to the desk, but there is room on the pole for another 10cm of lift. The design has changed from the published product photo's, so there are no longer pre drilled height position holes in the pole. The pole is smooth and undrilled, the height adjustment is achieved by moving the bracket to the desired height and them firmly tightening the clamp via provided Allen key. There is a real-time swivel adjustment from left to right, and there is a tilt adjustment but not in real-time. The tilt adjustment is held in place by 4 bolts to prevent any slip due to the weight of these big screens, so you have to set the tilt you want and tighten up all the bolts to fix that position. There is no swivel adjustment to rotate the screen from landscape to portrait. I am in the UK and it seems this is only ships from the USA, so the delivery estimate was 2 weeks, but it got to me in only 9 days, the service was excellent with full tracking the whole way, and when it arrived the box and contents were in perfect condition. There is basic assembly required but all tools are provided along with accessories to cater for various VESA mounting configurations. Very happy with the purchase.

Works well, no drilling required and holds my Sharp Aquos Monitor/TV so i can actually use my sit / stand desk properly

I installed the VIVO Ultra Wide Screen TV and Monitor Desk Mount (STAND-V101C) to free up desk space, and it has been a solid addition. The mount securely holds my 36” Monitor, providing adjustable height and tilt for optimal viewing angles. Assembly was straightforward, and the sturdy design ensures stability. However, the pole height is fixed, which places the screen closer to the desk than I prefer; an additional 2-3 inches would have been ideal. Overall, it’s a reliable mount that effectively supports larger screens, enhancing my workspace.