Landgarden Outdoor Misting Cooling System,Misting Line,Brass Mist Nozzles for Patio Garden Greenhouse

Tried it out. Put it on a large floor fan, fit well. angled nozzle outward towards edges of fan. Very good misting action. One downfall was the connection to garden spigot isn't a swivel so best to disconnect tubing from mister ring to be able to twist tubing while connecting and disconnecting fitting to spigot. Didn't need the Teflon tape included no leaks. Good value. Will be good for outdoor get together in the middle of summer.

Works great on a metal stand up fan. Great way to stay cool while out side in the heat. Used in Biloxi Mississippi

So far, decent, especially for the price point. I wanted something quick and inexpensive to try for the back patio. I’ve been running this for hours each day in the summer heat with good results. The dog likes it too.Some mentioned leaks at the water source. I agree, but the fix for this is just to insert one of those common rubber gaskets you find e.g. in hose end sprayers. You can get those anywhere. I just took one from an old sprayer to confirm my suspicion. The seller should just include one in the kit. That’s one reason for four stars. The other is that I wish the mist was finer, as it does get the patio pretty wet, even if the fan is elevated. But to get finer mist, I understand higher-end nozzles and maybe higher pressure are needed. That’s not the intent with this product.

This misting kit was exactly as described and worked well for what I needed. I’m very pleased with it and would recommend it to anyone wanting a cooler outdoor space.

Works as advertised. You need to assemble the whole system. If you are not handy, it may be a challenge, but it was super easy for me. I've got mild carpentry, plumbing, and electrical experience, so it was straight forward to me without the instructions.Instructions are in very poor, broken English. They skimped on paying a translator. But I didnt need them so didn't care much.I've got this hooked up a 2 stage, whole house water filtration system that I have connected to my hose spigot for my garden. We do not have a hard water issue in my area, so between the softer water and water filter, I do not anticipate it clogging any time soon.It comes with a T splitter I'd need be. I did not need it. One of the emitters was missing one of the pieces that holds the water line in, so I took one out of the T splitter and made it work. I was a bit irritated at this but they also send an extra emitter nozzle which I ended up needing because I messed up putting the Teflon tape on the nozzle and it got inside the nozzle and clogged it and I cannot get it out. So because they made my life easier by sending that extra nozzle, I wasn't upset about the missing piece that holds the hose in the emitter. After the fact I realized they send 16 emitters and 17 nozzles, while the listed stayed 15, so I'm stoked with them sending extra in case you have issuesDefinitely use the Teflon tape on the nozzles or risk them leaking. If you have the nozzle head facing down and the threaded side up, you wrap the Teflon tape clockwise. Going the other way can result in "unwinding" the tape as you screw it in.Overall I'm satisfied with the product on day one. I'll update if things change but only issue I see is the nozzles getting clogged which is of no fault to the company. That's a water supply issue and any misting nozzle will need maintenance at some point or another. It also included a sediment filter where you hook it up to a spigot/hose. Won't be enough to stop hardwayer build up but will stop bigger particulate.Overall I'm satisfied with this product and my chickens are finally not panting any more

This product is close to garbage. I gave it 3 stars because it had held up for about a month, but that may change.I had 3 issues with this so far.1. The threading inside of the nozzle T's are very coarse and do not properly seal with the brass nozzles. I had to use nylon tape to properly seal the nozzles or else I would get random streams of water squirting from the threading. And BTW, use a different tape than the tape supplied. The supplied tape is so thin and stringy that it would take 3it's the wraps compared to tape I had bought from a local hardware store.2. The provided clips that resemble badge holders were almost all defective and broke where the plastic attaches to the "metal" material. Looks like the QC was poor, in my opinion, and many of the plastic pieces tore off with very little effort. I was able to salvage a few to still use.3. The clasps that hold the 1/4" tubing on the nozzle T adaptors need to be completely pushed in, even further than just inserting to what seems to be fully inserted. I ended up needing to depress the release flanges on both sides and push the tubing in with some force, then pulling the flanges out and pushing again. I have worked with these types of adaptors before, and most just need to be pushed in until they stop, without pulling the release flanges out. These have grip, but do not seal properly unless the flanges are pulled out, with the tubing installed.I gave 3 stars because, even though there are Quality Control issues, the product DOES work.To get a proper misting effect for a covered patio, it is best to have the nozzles/sprayers at least 4' from where you are sitting. 6' is the recommended by the manufacturer.If the threading was a bit tighter in tolerance, the tape would not be needed. And if the plastic card-clips were a bit more sturdy, they would hold up better.This is all just from my experience.

If you like the outdoors, this is a product that will keep you cool while enjoying the outdoors. It comes with all the adapters to install on your tent, fan or other places you want to install it.

I live in the PNW, too darn hot these days for some of my chubby, English ladies. The chickens seem to like the mist and the chicken run seems noticeably cooler. Quick shipping, easy to install.PROSEasy to install with a good pair of scissors and some zip ties. I added 8 misters using zip ties to the top edge of my chicken run in less than ten minutes.- Determine the layout and lengths before you cut. Avoid hard turns and bends.- Mark the desired mister locations with some masking tape. I used zip ties on each side of intendedmister location- Make sure you leave enough at the end to attach a hose without pulling it too much.- I hung the entire black hose run before cutting. BUT, wait until the end to fully tighten your zip ties.- Cap the starting end with the supplied cap- Move to your next taped location. cut the tubing, install the sprayer tee and screw in the brass mistingvalve.- Then move to the next taped mark, then repeat the whole process.CONSIf I had any complaints at all:- The hose end doesn't rotate making it a little tricky to attach. Solved this using a set of quick-connects.- The hose end washer is a little cheap and lacks the tiny tabs to keep it in place.Final Thoughts:I really recommend using a good brass hose splitter with a ball valve so you can independently adjust theflow to this connection.I used it on my chicken run, but it would probably work equally well for a patio. For a patio, make sure it's mounted pretty high or it will get a lot of things and people wet. If you mount it too low, the mist will not evaporate before it hits the surfaces and everything and everyone will eventually be very wet.

Funcional

A

Very low quality product

Used in gazebo. Easy to assemble and install. Arrived fast and complete. Very happy.

الرشاش يجي معها فقط بدون مروحه